Thickness-controlled porous polyethylene/hydrocarbon ionomer composite membranes for durable proton exchange membrane water electrolysis
Source abstract
Abstract
Hydrocarbon (HC)-based composite membranes reinforced with porous polyethylene (PE) substrates are investigated for proton exchange membrane water electrolysis (PEMWE). Sulfonated poly(arylene ether sulfone) with 50 mol% sulfonation (SPAES50) is used as the ionomer, and a porous PE compatible with SPAES50 is incorporated to improve the mechanical robustness and dimensional stability. A series of composite membranes with different thicknesses are fabricated to examine the effect of the HC ionomer-to-PE thickness ratio. The composite membranes exhibit enhanced dimensional stability and reduced hydrogen permeability, with the latter being 70% lower than that of Nafion212 owing to the rigid SPAES50 backbone and the suppressed membrane swelling caused by PE. Although the incorporation of non-proton-conductive PE results in lower proton conductivity than that of SPAES50, the composite membranes with thickness ratios of 1:1:1 and 1.5:1:1.5 (HC:PE:HC) show proton conductivities comparable to that of Nafion212. In PEMWE single-cell tests, the composite membrane with a 1:1:1 thickness ratio achieves a current density of 5.40 A/cm 2 at 1.9 V, exceeding that of Nafion212 (5.19 A/cm 2 ). Moreover, this membrane exhibited a lower degradation rate of 130 μV/h compared to pristine membranes. Consequently, the 1:1:1 configuration is identified as the optimal design for PE-reinforced HC composite membranes in PEMWE. • Thickness-controlled PE/HC composite membranes improve mechanical stability in PEMWE. • Porous PE reinforcement reduces swelling and hydrogen permeability by ∼70%. • An optimal 1:1:1 thickness ratio demonstrates performance comparable to Nafion212. • The S/PE-1.0 membrane exhibits a low degradation rate during long-term PEMWE operation.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Fuel Cells and Related Materials · Membrane-based Ion Separation Techniques · Hybrid Renewable Energy Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. A comprehensive review on PEM water electrolysis10.1016/j.ijhydene.2013.01.151 ↗
2. Recent progresses in electrocatalysts for water electrolysis10.1007/s41918-018-0014-z ↗
3. The future of hydrogen – opportunities and challenges10.1016/j.ijhydene.2008.11.014 ↗
4. Advances in hydrogen storage materials: harnessing innovative technology, from machine learning to computational chemistry, for energy storage solutions10.1016/j.ijhydene.2024.03.223 ↗
5. High temperature proton exchange membrane fuel cells: progress in advanced materials and key technologies10.1039/D0CS00296H ↗
6. Polymer electrolyte membrane water electrolysis: status of technologies and potential applications in combination with renewable power sources10.1007/s10800-012-0490-5 ↗
7. Advancing proton exchange membrane electrolyzers with molecular catalysts10.1016/j.joule.2020.06.001 ↗
8. A review of proton exchange membrane water electrolysis on degradation mechanisms and mitigation strategies10.1016/j.jpowsour.2017.09.006 ↗
9. Designing the next generation of proton-exchange membrane fuel cells10.1038/s41586-021-03482-7 ↗
10. Effect of components and operating conditions on the performance of PEM electrolyzers: a review
11. Highly sulfonated aromatic graft polymer with very high proton conductivity and low hydrogen permeability for water electrolysis10.1021/acsenergylett.2c02143 ↗
12. Overview of membrane electrode assembly preparation methods for solid polymer electrolyte electrolyzer
13. Highly stable graphene oxide composite proton exchange membrane for electro-chemical energy application10.1016/j.ijhydene.2019.06.108 ↗
14. Overview and evaluation of crossover phenomena and mitigation measures in proton exchange membrane (PEM) electrolysis10.1016/j.ijhydene.2024.04.248 ↗
15. Sinha · 2024 · vol. 5 · 710
16. Stability and degradation mechanisms of radiation-grafted polymer electrolyte membranes for water electrolysis10.1021/acsami.6b03050 ↗
17. An overview of the proton conductivity of nafion membranes through a statistical analysis10.1016/j.memsci.2015.12.065 ↗
18. Pressurized PEM water electrolysis: efficiency and gas crossover10.1016/j.ijhydene.2013.09.013 ↗
19. Challenges and future developments in proton exchange membrane fuel cells10.1016/j.renene.2005.09.003 ↗
20. All-hydrocarbon MEA for PEM water electrolysis combining low hydrogen crossover and high efficiency
21. Compatible ionic crosslinking composite membranes based on SPEEK and PBI for high temperature proton exchange membranes10.1016/j.ijhydene.2016.05.227 ↗
22. Reinforcement of highly proton conducting multi-block copolymers by online crosslinking10.1002/fuce.201300261 ↗
23. Multi-block copolymer membranes consisting of sulfonated poly(p-phenylene) and naphthalene containing poly(arylene ether ketone) for proton exchange membrane water electrolysis10.3390/polym15071748 ↗
24. Humidity and temperature cycling effects on cracks and delaminations in PEMFCs10.1002/fuce.201400118 ↗
25. Degradation of a sulfonated aryl ether ketone model compound in oxidative media (sPAEK)10.1016/j.polymer.2008.12.051 ↗
26. Composite membranes for medium-temperature PEM fuel cells10.1146/annurev.matsci.33.022702.154702 ↗
27. Constrained hydrocarbon-based ionomers in porous Poly(tetrafluoroethylene) supports for enhanced durability of polymer electrolyte membrane fuel cells and water electrolyzers10.1016/j.jpowsour.2022.232221 ↗
28. Surface hydrophilization toward the proton conductive porous PTFE substrate impregnating SPEEK for polymer electrolyte membranes10.1016/j.porgcoat.2021.106643 ↗
29. Natural clay frameworks in membrane electrode assembly: challenges and perspectives10.1016/j.nanoen.2025.110980 ↗
30. Sulfonated poly(p-phenylene)-based ionomer/PTFE composite membrane with enhanced performance and durability for energy conversion devices10.1016/j.jpowsour.2023.233422 ↗
31. Hydrocarbon-based composite membrane using LCP-nonwoven fabrics for durable proton exchange membrane water electrolysis10.3390/polym15092109 ↗
32. Fabrication of sulfonated poly ether ether ketone membranes reinforced with PEEK meshes: Mos2 sputtering to enhance functional properties for PEM water electrolysis application10.1002/app.57236 ↗
33. High-performance and durable pressure retarded osmosis membranes fabricated using hydrophilized polyethylene separators10.1016/j.memsci.2020.118796 ↗
34. Surface characterization of microporous polypropylene membranes modified by plasma treatment10.1016/S0032-3861(01)00245-2 ↗
35. Porous polyethylene supports in reinforcement of multiblock hydrocarbon ionomers for proton exchange membranes10.1021/acs.langmuir.3c02540 ↗
36. Comprehensive analysis of membrane thickness and reinforcement ratio effects on the performance and durability of polymer electrolyte membranes10.1016/j.memsci.2025.124902 ↗
37. Thickness dependence of proton-exchange-membrane properties10.1149/1945-7111/ac2973 ↗
38. Effect of membrane thickness on the performance and efficiency of passive direct methanol fuel cells10.1016/j.jpowsour.2005.03.190 ↗
39. Degradation of a polymer exchange membrane fuel cell stack with nafion® membranes of different thicknesses: part I. In situ diagnosis10.1016/j.jpowsour.2010.06.023 ↗
40. Influence of membrane thickness on membrane degradation and platinum agglomeration under long-term open circuit voltage conditions10.1016/j.electacta.2014.12.024 ↗
41. Comparison on the impact of membrane thickness on the performance of proton exchange membrane-based electrochemical devices10.1016/j.ijhydene.2025.03.235 ↗
42. Optimal membrane thickness for proton exchange membrane (PEM) electrolyzer considering gas crossover and membrane degradation10.1016/j.apenergy.2025.126119 ↗
43. Influence of the bisphenol structure on the direct synthesis of sulfonated poly(arylene ether) copolymers. I10.1002/pola.10755 ↗
44. Directly copolymerized poly(arylene sulfide sulfone) disulfonated copolymers for PEM-based fuel cell systems. I. Synthesis and characterization10.1002/pola.20744 ↗
45. Crosslinked sulfonated poly(arylene ether sulfone) membranes for fuel cell application10.1016/j.ijhydene.2011.10.122 ↗
46. Synthesis and characterization of intermolecular ionic cross-linked sulfonated poly(arylene ether sulfone)s for direct methanol fuel cells10.1016/j.memsci.2011.11.044 ↗
47. Well-dispersed radical scavengers for highly durable hydrocarbon-based proton exchange membranes in water electrolysis
48. Alcohol-treated porous PTFE substrate for the penetration of PTFE-incompatible hydrocarbon-based ionomer solutions10.1021/acs.langmuir.1c00120 ↗
49. Structure-morphology-property relationships of non-perfluorinated proton-conducting membranes10.1002/adma.201001164 ↗
50. Hydrogen crossover in proton exchange membrane electrolysers: the effect of current density, pressure, temperature, and compression10.1016/j.electacta.2021.138085 ↗
51. Proton exchange membrane water electrolysis incorporating sulfo-phenylated polyphenylene catalyst coated membranes
52. Multilayered hydrocarbon ionomer/PTFE composite electrolytes with enhanced performance for energy conversion devices10.1016/j.ijhydene.2022.11.038 ↗
53. Ion exchange capacity controlled biphenol-based sulfonated poly(arylene ether sulfone) for polymer electrolyte membrane water electrolyzers: comparison of random and multi-block copolymers10.1016/j.memsci.2021.119370 ↗
54. Phenol degradation using glassy carbon electrodes modified with particles of Co-Mo alloy10.1016/S1452-3981(23)14716-X ↗
55. Enhancing the durability of hydrocarbon-membrane-based polymer electrolyte water electrolysis using a radical scavenger-embedded interlocking interfacial layer10.1039/D1TA08222A ↗
56. Durability and degradation analysis of hydrocarbon ionomer membranes in polymer electrolyte fuel cells accelerated stress evaluation10.1016/j.jpowsour.2017.09.025 ↗
57. Failure of PEM water electrolysis cells: case study involving anode dissolution and membrane thinning10.1016/j.ijhydene.2014.05.043 ↗