Impact of cell temperature on cathode catalyst layer oxygen transport resistance and performance ageing under heavy-duty conditions
Source abstract
Abstract
The operating temperature of polymer electrolyte membrane fuel cells for heavy-duty transport applications is a crucial parameter for materials durability. This work focuses on cathode catalyst layer ageing of commercial membrane electrode assemblies caused by an accelerated stress test representative of real heavy-duty operation. The adopted protocol was designed with a methodology previously validated and based on real vehicles data available in literature. Degradation studies were carried out on different samples, where the cell temperature was changed between 80 °C, 90 °C and 100 °C, without changing the other operating conditions, including the dew point of supplied gases. Results demonstrated a complex superimposition of degradation mechanisms, including electrocatalyst ripening and support oxidation, which affected high current performance and oxygen transport resistance ageing. At 100 °C a minor acceleration of electrocatalyst active area loss was observed. Larger performance loss and mass transport resistance increase were observed at increasing operating temperature, indicating larger impact of carbon corrosion. A dedicated and innovative analysis on the evolution of pressure independent oxygen mass transport resistance highlighted the alteration of ionomer thin-film resistance.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Electric and Hybrid Vehicle Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. New roads and challenges for fuel cells in heavy-duty transportation10.1038/s41560-021-00775-z ↗
2. Recent developments in catalyst-related PEM fuel cell durability10.1016/j.coelec.2020.02.007 ↗
3. H.F.C.T.O. US Department of Energy, Hydrogen and fuel cell technologies office multi-year program plan | 2024 5 Fuel Cell Technol. 5.1 Overview, n.d. https://www.hydrogen.energy.gov/library/roadmaps-vision/clean-hydrogen-strategy-roadmap...
4. Challenges in membrane electrode assemblies at elevated temperatures for proton exchange membrane fuel cells: a review10.1039/D5EE01108F ↗
5. Instability of pt∕c electrocatalysts in proton exchange membrane fuel cells10.1149/1.2050347 ↗
6. Physical modeling of catalyst degradation in low temperature fuel cells : platinum oxidation , dissolution , particle growth and platinum band formation
7. Platinum dissolution and deposition in the polymer electrolyte membrane of a PEM fuel cell as studied by potential cycling10.1039/B514342J ↗
8. PEM fuel cell electrocatalyst durability measurements10.1016/j.jpowsour.2006.03.009 ↗
9. Study of the effect of temperature on Pt dissolution in polymer electrolyte membrane fuel cells via accelerated stress tests10.1016/j.jpowsour.2013.07.016 ↗
10. A semi-empirical catalyst degradation model based on voltage cycling under automotive operating conditions in PEM fuel cells10.1149/2.0641902jes ↗
11. Influence factors of platinum dissolution in proton exchange membrane fuel cells: a sensitivity study10.1149/1945-7111/ad45c3 ↗
12. High voltage stability of nanostructured thin film catalysts for PEM fuel cells10.1016/j.jpowsour.2006.05.033 ↗
13. Effect of high-temperature operation on voltage cycling induced PEMFC degradation : from automotive customer drive cycles to an accelerated stress test10.1149/1945-7111/ad7e51 ↗
14. Degradation of automotive PEM fuel cells under accelerated stress tests – the effect of high operating temperature10.1016/j.jpowsour.2025.237408 ↗
15. Temperature effects in polymer electrolyte membrane fuel cells10.1002/celc.202000588 ↗
16. A reverse-current decay mechanism for fuel cells10.1149/1.1896466 ↗
17. Effect of operating conditions on carbon corrosion in polymer electrolyte membrane fuel cells10.1016/j.jpowsour.2009.04.006 ↗
18. Effect of carbon support characteristics on fuel cell durability in accelerated stress testing
19. Effects of operating temperature on the carbon corrosion in a proton exchange membrane fuel cell under high current density
20. Local degradation effects in automotive size membrane electrode assemblies under realistic operating conditions10.1016/j.apenergy.2019.114291 ↗
21. Mitigated Start-Up of PEMFC in real automotive conditions: local experimental investigation and development of a new accelerated stress test protocol10.1149/1945-7111/abf77b ↗
22. Air-start-up of PEM fuel cells under automotive conditions: analysing degradation mechanisms via accelerated protocols comparison10.1149/1945-7111/ade0f1 ↗
23. Mitigating PEMFC degradation during start-up: locally resolved experimental analysis and transient physical modelling10.1149/1945-7111/abf4eb ↗
24. Correlation of changes in electrochemical and structural parameters due to voltage cycling induced degradation in PEM fuel cells10.1149/2.0271806jes ↗
25. Carbon corrosion in PEM fuel cells and the development of accelerated stress tests10.1149/2.0061806jes ↗
26. On the need of improved accelerated degradation protocols (ADPs): examination of platinum dissolution and carbon corrosion in half-cell tests10.1149/2.0731614jes ↗
27. The effect of platinum on carbon corrosion behavior in polymer electrolyte fuel cells10.1016/j.electacta.2011.06.093 ↗
28. Nafion degradation mechanisms in proton exchange membrane fuel cell (PEMFC) system: a review10.1016/j.ijhydene.2021.06.032 ↗
29. Embrittlement induced fracture behavior and mechanisms of perfluorosulfonic-acid membranes after chemical degradation10.1016/j.jpowsour.2020.227893 ↗
30. Insight into the evolution of membrane chemical degradation in proton exchange membrane fuel cells:from theoretical analysis to model developing10.1016/j.jpowsour.2024.234238 ↗
31. The possibility of intermediate–temperature (120 °C)–operated polymer electrolyte fuel cells using perfluorosulfonic acid polymer membranes10.1149/1945-7111/ac624b ↗
32. Temporary high temperature operation of an automotive PEM fuel cell: analysis of local degradation mechanisms10.1016/j.jpowsour.2025.237310 ↗
33. The effect of temperature and load as a stressor for proton exchange membrane fuel cells durability at intermediate temperatures10.1016/j.jpowsour.2025.238258 ↗
34. Tracking the evolution of mechanical degradation in fuel cell membranes using 4D in situ visualization10.1016/j.jpowsour.2018.11.049 ↗
35. Experimental observations of microstructure changes in the catalyst layers of proton exchange membrane fuel cells under wet-dry cycles
36. Delamination evolution of PEM fuel cell membrane/CL interface under asymmetric RH cycling and CL crack location10.1016/j.apenergy.2022.118551 ↗
37. Degradation behavior of ionomer in the cathode catalyst layer of polymer electrolyte fuel cells10.1016/j.apenergy.2025.125759 ↗
38. High-resolution analysis of ionomer loss in catalytic layers after operation10.1149/2.0151806jes ↗
39. 2017
40. Development of accelerated durability test protocols for polymer electrolyte membrane fuel cell stacks under realistic operating conditions
41. PEMFC performance decay during real-world automotive operation : evincing degradation mechanisms and heterogeneity of ageing10.1016/j.jpowsour.2022.232246 ↗
42. An innovative accelerated stress test representative of automotive PEMFC degradation mechanisms validated on 1000 hours real-world operation10.1016/j.jpowsour.2023.233376 ↗
43. Evaluation of PEM fuel cell degradation through accelerated stress tests to investigate heterogeneity of ageing10.1149/1945-7111/adc62b ↗
44. Realistic accelerated stress tests for PEM fuel cells: operation condition dependent load profile optimization10.1016/j.jpowsour.2024.234959 ↗
45. Local ageing effects of polymer electrolyte fuel cell membrane electrode assemblies due to accelerated durability testing10.1002/fuce.202200064 ↗
46. Revealing the critical role of low voltage excursions in enhancing PEM fuel cell catalyst degradation by automotive hydrogen/air potential cycling experiments10.1016/j.ijhydene.2024.03.373 ↗
47. Performance evaluation of a PEM fuel cell stack with variable inlet flows under simulated driving cycle conditions10.1016/j.apenergy.2017.08.224 ↗
48. Local impact of load cycling on degradation in polymer electrolyte fuel cells
49. Durability degradation mechanism and consistency analysis for proton exchange membrane fuel cell stack10.1016/j.apenergy.2022.119020 ↗
50. A review of durability test protocols of the proton exchange membrane fuel cells for vehicle10.1016/j.apenergy.2018.04.050 ↗
51. Operating condition optimization of heavy-duty truck PEM fuel cell for enhanced performance and durability10.1016/j.ijhydene.2025.03.098 ↗
52. Performance and durability of heavy-duty fuel cell systems with an advanced ordered intermetallic ORR alloy catalyst and novel support10.1149/1945-7111/ad9063 ↗
53. Accelerated stress testing (AST) protocols for heavy-duty fuel cells, (n.d.). https://millionmilefuelcelltruck.org/ast-protocols (accessed September 23, 2025)..
54. Immortal D2.4: Final Protocol Definition for Heavy-Duty Accelerated Stress Tests and Load Profile Tests, (n.d.). chrome-extension://efaidnbmnnnibpcajpcglclefindmkaj/https://www.immortal-fuelcell.eu/images/IMMORTAL_D2.4_Final_protocol_definition_for_heavy-duty_accelerated_stress_tests_and_load_profile_tests.pdf (accessed September 22, 2025)..
55. An open-source zero-gradient cell hardware to improve and accelerate durability testing of PEM fuel cells10.1016/j.ohx.2023.e00495 ↗
56. In-Plane redistribution of radical scavenger during PEMFC real-world automotive operation: local degradation and impact on catalyst-layer ionomer thin-film10.1016/j.jpowsour.2024.235962 ↗
57. Cerium in-plane transport in PEM fuel cells during real-world automotive operations: experimental and dynamic modelling analysis10.1016/j.jpowsour.2025.238538 ↗
58. Measurement of oxygen transport resistance in PEM fuel cells by limiting current methods10.1149/1.3152226 ↗
59. Analysis of oxygen-transport diffusion resistance in proton-exchange-membrane fuel cells10.1149/1.3546038 ↗
60. An experimental study of the effects of operational history on activity changes in a PEMFC10.1149/2.103309jes ↗
61. Effects of PEMFC operational history under dry/wet conditions on additional voltage losses due to ionomer migration10.1149/1945-7111/abc83f ↗
62. Recent advances in catalyst accelerated stress tests for polymer electrolyte membrane fuel cells10.1149/2.0881807jes ↗
63. Multi-Year Research, Development, and Demonstration Plan, (n.d.)...
64. The impact of platinum loading on oxygen transport resistance10.1149/2.061212jes ↗
65. Voltage cycling induced losses in electrochemically active surface area and in H 2/Air-Performance of PEM fuel cells10.1149/2.0561606jes ↗
66. Achieving 5,000-h and 8,000-h Low-PGM electrode durability on automotive drive cycles10.1149/1945-7111/abf507 ↗
67. Degradation of Pt-Based cathode catalysts upon voltage cycling in single-cell PEM fuel cells under air or N 2 at different relative humidities10.1149/1945-7111/ad10e9 ↗
68. The effect of ionomer to carbon ratio and relative humidity on cathode catalyst degradation in PEM fuel cells the effect of ionomer to carbon ratio and relative humidity on cathode catalyst degradation in PEM fuel cells10.1149/1945-7111/acff1f ↗
69. Load cycle durability of a graphitized carbon black-supported platinum catalyst in polymer electrolyte fuel cell cathodes10.1016/j.jpowsour.2016.05.117 ↗
70. Modeling analysis of PEMFC under heavy-duty conditions: impact of radical scavenger transport on performance ageing and identification of an innovative material-based mitigation strategy
71. Impact of carbon support corrosion on performance losses in polymer electrolyte membrane fuel cells10.1149/2.0611913jes ↗
72. Insight into carbon corrosion of different carbon supports for Pt-based electrocatalysts using accelerated stress tests in polymer electrolyte fuel cells10.1016/j.jpowsour.2022.232209 ↗
73. Enhanced PEMFC durability with graphitized carbon black cathode catalyst supports under accelerated stress testing10.1039/D1RA01468D ↗
74. Trading off initial PEM fuel cell performance versus voltage cycling durability for different carbon support morphologies10.1149/1945-7111/ad5624 ↗
75. Universal correlation between cathode roughness factor and H 2/Air performance losses in voltage cycling-based accelerated stress tests10.1149/1945-7111/ac67b8 ↗
76. Modeling of mass transport resistance in PEM fuel cells and validation through novel transient limiting current techniques10.1149/1945-7111/add182 ↗
77. Experimental investigation on the effect of channel geometry on performance heterogeneity in hydrogen PEM fuel cell10.1016/j.ijhydene.2024.08.515 ↗
78. Investigating fuel-cell transport limitations using hydrogen limiting current10.1016/j.ijhydene.2017.01.036 ↗
79. Fuel-cell catalyst-layer resistance via hydrogen limiting-current measurements10.1149/2.0031907jes ↗
80. The priority and challenge of high-power performance of Low- platinum proton-exchange membrane fuel cells10.1021/acs.jpclett.6b00216 ↗
81. Trading off initial PEM fuel cell performance versus voltage cycling durability for different carbon support morphologies10.1149/1945-7111/ad5624 ↗
82. Ordered mesoporous carbon supported fuel cell cathode catalyst for improved oxygen transport10.1016/j.jpowsour.2022.231349 ↗
83. Ionomer side chain length and equivalent weight impact on high current density transport resistances in PEMFC cathodes10.1149/1945-7111/abe5eb ↗
84. Influence of equivalent weight of ionomer on local oxygen transport resistance in cathode catalyst layers10.1149/2.040308jes ↗
85. The role of oxygen-permeable ionomer for polymer electrolyte fuel cells10.1038/s41467-021-25301-3 ↗
86. Impact of platinum loading and catalyst layer structure on PEMFC performance10.1149/2.072308jes ↗
87. Cathode loading impact on voltage cycling induced PEMFC degradation : a voltage loss analysis10.1149/2.0161806jes ↗
88. Boosting fuel cell performance with accessible carbon mesopores
89. Degradation mechanisms of carbon supports under hydrogen passivation startup and shutdown process for PEFCs10.1149/2.0101704jes ↗
90. Ionomer content effect on charge and gas transport in the cathode catalyst layer of proton-exchange membrane fuel cells10.1016/j.jpowsour.2021.229531 ↗
91. Pore-scale study of pore-ionomer interfacial reactive transport processes in proton exchange membrane fuel cell catalyst layer10.1016/j.cej.2019.123590 ↗
92. Carbon corrosion resistance in PEM fuel cells: comparative study of short and long side chain perfluorosulfonic acid ionomers10.1016/j.ijhydene.2025.04.262 ↗
93. Effect of ionomer-to-carbon ratio on PEMFC carbon corrosion: an electrochemical study10.1149/1945-7111/ae1b3d ↗
94. An epoxy-free sample preparation approach to enable imaging of ionomer and carbon in polymer electrolyte membrane fuel cells10.1002/adfm.202209733 ↗
95. Analysis of inkjet printed PEFC electrodes with varying platinum loading10.1149/2.1111607jes ↗
96. Modeling of oxygen diffusion resistance in polymer electrolyte fuel cells in the intermediate potential region10.1149/2.0471803jes ↗
97. Through-the-Membrane transient phenomena in PEM fuel cells : a modeling study10.1149/2.0181907jes ↗
98. A novel (ex situ) method to quantify oxygen diffusion coefficient of polymer fuel cells backing and catalyst layers10.1016/j.jpowsour.2016.06.051 ↗
99. Dynamic modeling of polymer electrolyte membrane fuel cells under real-world automotive driving cycle with experimental validation on segmented single cell10.1016/j.renene.2024.121194 ↗
100. Characterization of gas diffusion layer transport properties by limiting current approach10.1016/j.electacta.2021.139755 ↗