journal article·2026-06Open access

Development of a P2D-based model for battery swelling prediction under mechanical constraints

Jun Yin, Christoph Drießen, Maximilian Schinagl, Tewelde Hailay Gebregeorgis, Mats Meeusen, Mesfin Haile Mamme, Patrick Höschele, Christian Ellersdorfer

Abstract

Lithium-ion batteries (LIBs) for electric vehicles are typically assembled into modules with mechanical constraints that exert external pressure on individual cells to improve stability and performance. During operation, battery swelling behavior under mechanical constraint generates external pressure fluctuation that can lead to structural degradation, including electrode cracking, separator deformation, and accelerated side reactions. This ultimately increases the risk of safety issues such as internal short circuits and thermal runaway. While existing battery simulation models provide insights into the mechanisms of battery swelling, many overlook the influence of external mechanical pressure. However, these effects should not be overlooked, as they impact the behavior of battery swelling. In this study, we present a pseudo-two-dimensional (P2D) model which integrates lithium ion transport dynamics with pressure-dependent parameters to enable swelling prediction of LIBs under mechanical constraints without requiring real-time sensors during operation. We found that the model predicts cell thickness changes during 1C discharge at 0.164 MPa with a mean absolute percentage error (MAPE) of 6.87% compared to experimental results. These findings bridge the gap in predicting changes in cell thickness under mechanical constraints. The approach in our study is crucial for the safety assessment of mechanically constrained battery systems.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Battery Technologies Research · Vibration Control and Rheological Fluids · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (72)

Show source-provided references
1. Lithium-ion batteries and the future of sustainable energy: a comprehensive review10.1016/j.rser.2025.115971 ↗
2. Powering the sustainable future: a review of emerging battery technologies and their environmental impact10.1039/D5SU00127G ↗
3. Influence of reversible swelling and preload force on the failure behavior of a lithium-ion pouch cell tested under realistic boundary conditions10.1016/j.est.2023.107228 ↗
4. Stress evolution and capacity fade in constrained lithium-ion pouch cells10.1016/j.jpowsour.2013.06.165 ↗
5. Effects of module stiffness and initial compression on lithium-ion cell aging10.1016/j.jpowsour.2021.230163 ↗
6. Experimental investigation on reversible swelling mechanisms of lithium-ion batteries under a varying preload force10.3390/batteries9040218 ↗
7. Challenges and opportunities for high-quality battery production at scale10.1038/s41467-025-55861-7 ↗
8. A review of battery failure: classification, mechanisms, analysis, and management10.1016/j.rser.2025.116126 ↗
9. Investigating the mechanical in-plane characteristics of lithium-ion pouch cells under crush loads10.1016/j.est.2024.111581 ↗
10. Thermal runaway propagation behavior and gas production characteristics of NCM622 battery modules at different state of charge10.1016/j.psep.2024.03.011 ↗
11. J. Yin, C. Drießen, R. Klink, S. Kizio, J. Moser, C. Ellersdorfer, P. Höschele, Implementation of Gas Formation into a finite-element Model for the Mechanical Swelling Simulation of lithium-ion Batteries.
12. Volume and thickness change of NMC811 | SiO x -graphite large-format lithium-ion cells: from pouch cell to active material level10.1016/j.jpowsour.2022.231443 ↗
13. Multi-scale investigation of thickness changes in a commercial pouch type lithium-ion battery10.1016/j.est.2016.01.006 ↗
14. Phase evolution and intermittent disorder in electrochemically lithiated graphite determined using in operando Neutron diffraction10.1021/acs.chemmater.9b05145 ↗
15. Reversible and irreversible dilation of lithium-ion battery electrodes investigated by in-situ dilatometry10.1016/j.jpowsour.2016.12.121 ↗
16. Insights into the swelling force in commercial LiFePO4 prismatic cell10.1016/j.jpowsour.2024.235330 ↗
17. Swelling, pressure evolution and aging in high-silicon/graphite composite lithium-ion batteries10.1016/j.jpowsour.2024.234582 ↗
18. Multi-scale swelling behaviors and mechanisms of graphite electrode-based lithium-ion battery at various charging rates10.1016/j.jpowsour.2024.234504 ↗
19. Reversible and irreversible expansion of lithium-ion batteries under a wide range of stress factors10.1149/1945-7111/ac2d3e ↗
20. Study of electrolyte and electrode composition changes vs time in aged Li-Ion cells10.1149/1945-7111/abe1da ↗
21. Model development for predicting irreversible swelling of aged lithium iron phosphate/graphite pouch cells under different pressures and temperatures10.1016/j.jpowsour.2025.236884 ↗
22. Pressure prediction modeling and validation for lithium-ion pouch cells in buffered module assemblies10.1016/j.est.2021.102517 ↗
23. Development of standardized battery pack for next-generation PHEVs in considering the effect of external pressure on lithium-ion pouch cells10.4271/2018-01-0439 ↗
24. Quantifying aging-induced irreversible volume change of porous electrodes10.1149/1945-7111/acff1d ↗
25. Heterogeneous damage in Li-ion batteries: experimental analysis and theoretical modeling10.1016/j.jmps.2019.05.003 ↗
26. Sensorless battery expansion estimation using electromechanical coupled models and machine learning10.1016/j.jechem.2024.12.068 ↗
27. A comprehensive review of battery modeling and state estimation approaches for advanced battery management systems10.1016/j.rser.2020.110015 ↗
28. Navigating the intricacies: a critical review of numerical modeling in battery research and design10.1016/j.jpowsour.2024.235902 ↗
29. Electrochemical-mechanical coupled modeling and parameterization of swelling and ionic transport in lithium-ion batteries10.1016/j.jpowsour.2017.12.044 ↗
30. Electrochemical-mechanical parameterization and modeling of expansion, pressure, and porosity evolution in NMC811∣SiOx-Graphite lithium-ion cells10.1149/1945-7111/ace1aa ↗
31. Development of experimental techniques for parameterization of multi-scale lithium-ion battery models10.1149/1945-7111/ab9050 ↗
32. Electrochemical thermal-mechanical modelling of stress inhomogeneity in lithium-ion pouch cells10.1149/2.0122001JES ↗
33. Coupled electrochemical-thermal-mechanical stress modelling in composite silicon/graphite lithium-ion battery electrodes10.1016/j.est.2023.108609 ↗
34. Modeling of galvanostatic charge and discharge of the Lithium/Polymer/Insertion cell10.1149/1.2221597 ↗
35. Simulation and optimization of the dual lithium ion insertion cell10.1149/1.2054684 ↗
36. Review and performance comparison of mechanical-chemical degradation models for lithium-ion batteries10.1149/2.0281914jes ↗
37. Computational modeling of heterogeneity of stress, charge, and cyclic damage in composite electrodes of Li-Ion batteries
38. Stress analysis of electrochemical and force-coupling model for ternary lithium-ion batteries10.3390/batteries10070231 ↗
39. Stress generation and fracture in lithium insertion materials10.1007/s10008-006-0095-1 ↗
40. Numerical simulation of intercalation-induced stress in Li-Ion battery electrode particles
41. A comparison of standard SEI growth models in the context of battery formation10.1149/1945-7111/ad8548 ↗
42. Degradation model of high-nickel positive electrodes: effects of loss of active material and cyclable lithium on capacity fade10.1016/j.jpowsour.2022.232461 ↗
43. Electro-Chemo-mechanical model for the damage in porous electrodes of lithium-ion batteries10.1149/1945-7111/ad4e74 ↗
44. A new method to model the thickness change of a commercial pouch cell during discharge10.1149/2.0441608jes ↗
45. Effect of external pressure and internal stress on battery performance and lifespan10.1016/j.ensm.2022.07.034 ↗
46. Study of the correlation between electric and mechanical/thermal parameters in a graphite - LiFePO4 pouch cell10.1016/j.jpowsour.2023.233018 ↗
47. Characterization and analysis of the effect of pressure on the performance of a large format NMC/C lithium-ion battery10.1016/j.jpowsour.2023.233117 ↗
48. Effects of mechanical compression on the aging and the expansion behavior of Si/C-Composite|NMC811 in different lithium-ion battery cell formats10.1149/2.1121915jes ↗
49. Study of the influence of mechanical pressure on the performance and aging of lithium-ion battery cells10.1016/j.jpowsour.2019.227148 ↗
50. Influence of pressure peaks occurring during battery module production on performance10.1016/j.est.2025.116581 ↗
51. Python battery mathematical modelling (PyBaMM)10.5334/jors.309 ↗
52. A million cycles in a day: enabling high-throughput computing of lithium-ion battery degradation with physics-based models10.1016/j.jpowsour.2024.234184 ↗
53. Microstructure and pressure-driven electrodeposition stability in solid-state batteries
54. Quantifying tortuosity in porous Li-ion battery materials10.1016/j.jpowsour.2008.12.032 ↗
55. A thermodynamic approach to the effect of pressure on solid/liquid interfacial tensions10.1016/S0927-7757(98)00878-4 ↗
56. Diffusion-induced stress amplification in phase-transition materials for electrodes of lithium-ion batteries10.1016/j.ijmecsci.2024.109541 ↗
57. A continuum of physics-based lithium-ion battery models reviewed10.1088/2516-1083/ac7d31 ↗
58. A numerically efficient method of solving the full-order pseudo-2-dimensional (P2D) Li-ion cell model10.1016/j.jpowsour.2021.229571 ↗
59. A model for investigating sources of Li-Ion battery electrode heterogeneity: part II. Active material size, shape, orientation, and stiffness
60. Numerical and experimental evaluation of the relationship between porous electrode structure and effective conductivity of ions and electrons in lithium-ion batteries10.1016/j.jpowsour.2016.12.098 ↗
61. The effect of stress on battery-electrode capacity10.1149/2.0371704jes ↗
62. Globally optimal univariate spline approximations10.1007/s10589-023-00462-7 ↗
63. Improving the approximation quality of tensor product B-spline surfaces by local parameterization10.1515/jag-2023-0071 ↗
64. Fast hierarchical fusion model based on least squares B-splines approximation10.1016/j.precisioneng.2019.08.007 ↗
65. A nonlinear theory of thermochemical equilibrium of solids under stress10.1016/0001-6160(78)90201-8 ↗
66. Verifying Larché-Cahn elasticity, a milestone of 20th-century thermodynamics10.1073/pnas.1809355115 ↗
67. Effects of external pressure on phase stability and diffusion rate in lithium-ion cells10.1016/j.jelechem.2021.115400 ↗
68. Surface structural disordering in graphite upon lithium intercalation/deintercalation10.1016/j.jpowsour.2009.12.034 ↗
69. A review on modeling of electro-chemo-mechanics in lithium-ion batteries10.1016/j.jpowsour.2018.12.011 ↗
70. Effects of lithium insertion induced swelling of a structural battery negative electrode10.1016/j.compscitech.2023.110299 ↗
71. Impact of bracing on large format prismatic lithium‐ion battery cells during aging
72. Detection of jelly roll pressure evolution in large-format Li-ion batteries via in situ thin film flexible pressure sensors10.1016/j.jpowsour.2023.232960 ↗