journal article·2026-06Open access

The robustness of powerline communication in overdischarged lithium-ion battery cells

He Hao, Matthew D. Higgins, Timothy A. Vincent

Abstract

Battery safety and instrumentation are increasingly critical in Battery Electric Vehicles and Battery Energy Storage systems. Smart cells with embedded sensing and connectivity hardware enable enhanced safety through early fault detection and degradation warning. Powerline communication (PLC) has emerged as a promising connectivity solution for battery packs. This paper presents novel investigation of the PLC channel performance in traction lithium 21700-format batteries under different health conditions, including varying levels of overdischarging (0.5 V, 1 V, and 1.5 V) and long-term degradation (500 and 700 cycles). Based on the Electrochemical Impedance Spectroscopy measurements, an Equivalent Circuit Model is developed to represent cells. Excellent agreement between simulated and measured S 21 results validate the proposed model for PLC channel simulation and scalability analysis in future battery systems. In terms of practically evaluating the communication channel, Vector Network Analyzer measurements further show that signal attenuation and group delay exhibit only marginal differences between pristine and degraded cells. Channel bit error rate tests using a PLC modem achieve values of the order of 10 − 6 , well below the commonly accepted threshold of 10 − 5 . For the first time, these results demonstrate the strong robustness of lithium-ion battery-based PLC channels and highlight their potential for reliable communication in future smart battery systems.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Power Line Communications and Noise · Advanced Battery Technologies Research · Wireless Power Transfer Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Green growth and net zero policy in the UK: some conceptual and measurement issues
2. Aging aware operation of lithium-ion battery energy storage systems: a review10.1016/j.est.2022.105634 ↗
3. Nitta · 2015
4. Deep-dive analysis of the latest lithium-ion battery safety testing standards and regulations in Germany and China10.1016/j.rser.2022.113077 ↗
5. Performance of electric bus batteries in rollover scenarios according to ECE R66 and R100 standards
6. Battery management systems in electric and hybrid vehicles10.3390/en4111840 ↗
7. In-situ temperature monitoring of a lithium-ion battery using an embedded thermocouple for smart battery applications10.1016/j.est.2022.105260 ↗
8. Functional safety bms design methodology for automotive lithium‐based batteries10.3390/en14216942 ↗
9. Munro News, “Cybertruck battery teardown vs. model Y: inside tesla's 4680 evolution.” Accessed: March. 17, 2026. [Online]. Available: https://leandesign.com/cybertruck-battery-teardown-model-y/.
10. Smart battery technology for lifetime improvement10.3390/batteries8100169 ↗
11. Fichtner · 2022
12. Capacity evaluation and degradation analysis of lithium-ion battery packs for on-road electric vehicles
13. Accelerated lithium-ion battery cycle lifetime testing by condition-based reference performance tests
14. Smart cells for embedded battery management
15. 2017
16. A battery management system for electric vehicle based on Zigbee and CAN
17. Issues and mitigation of interference, attenuation and direction of arrival in IEEE 802.15.4/ZigBee to wireless sensors and networks based smart building10.1016/j.measurement.2016.01.045 ↗
18. Abrahamsen · 2021
19. In-Vehicle power line communication: differences and similarities among the In-Car and the In-Ship scenarios10.1109/MVT.2015.2480098 ↗
20. Cell-wise monitoring of Lithium-ion batteries for automotive traction applications by using power line communication: battery modeling and channel characterization
21. Electric vehicle battery management system using power line communication technique
22. Power line communications for automotive high voltage battery systems: channel modeling and coexistence study with battery monitoring10.3390/en14071851 ↗
23. Development of an in-vehicle power line communication network with in-situ instrumented smart cells
24. Battery configuration dependence to power line communication using high-order quadrature amplitude modulation10.1016/j.est.2023.110233 ↗
25. In-situ powerline communication within lithium traction battery cells – analysis of channel in various configurations
26. Tian · 2024
27. Modeling the effect of cell variation on the performance of a lithium-ion battery module10.3390/en15218054 ↗
28. Saeed · 2025
29. 2026
30. Adenusi · 2023
31. Studies on the deposition of copper in lithium-ion batteries during the deep discharge process10.1038/s41598-021-85575-x ↗
32. Mechanism of the entire overdischarge process and overdischarge-induced internal short circuit in lithium-ion batteries
33. Degradation mechanism study and safety hazard analysis of overdischarge on commercialized lithium-ion batteries10.1021/acsami.0c18185 ↗
34. Molicel, “INR21700P45B_Datasheet.”.
35. Extending the electric vehicle battery first life: performance beyond the current end of life threshold10.1016/j.heliyon.2024.e26066 ↗
36. Quantification of the deep discharge induced asymmetric copper deposition in lithium-ion cells by operando synchrotron X-Ray tomography10.1002/admt.202301246 ↗
37. A comparison of battery equivalent circuit model parameter extraction approaches based on electrochemical impedance spectroscopy10.3390/batteries10110400 ↗
38. Insights into charge transfer dynamics of Li batteries through temperature-dependent electrochemical impedance spectroscopy (EIS) utilizing symmetric cell configuration10.1016/j.electacta.2024.144080 ↗
39. Double layer capacitance as a sensitive metric to monitor the formation of solid electrolyte interphases in Li-ion batteries10.1039/D4YA00524D ↗
40. Physical interpretation of the electrochemical impedance spectroscopy (EIS) characteristics for diffusion-controlled intercalation and surface-redox charge storage behaviors
41. Time-domain modeling of constant phase elements for simulation of lithium battery behavior10.1109/TPEL.2018.2881200 ↗
42. A generalized multiport conversion between S parameter and ABCD parameter
43. Power transfer analysis of an asymmetric wireless transmission system using the scattering parameters
44. Broadband powerline communication for low-voltage microgrids
45. Broadband variable gain amplifier with low group delay variation
46. Concept of a digital product passport for an electric vehicle battery
47. Cooling performance of thermal management system for lithium-ion batteries using two types of cold plate: experiment and MATLAB/Simulink-Simscape simulation10.1016/j.icheatmasstransfer.2023.106816 ↗
48. High frequency impedance characteristics of cylindrical lithium-ion cells: Physical-based modeling of cell state and cell design dependencies
49. Physical layer performance analysis of Power Line Communication (PLC) applied for cell-wise monitoring of automotive lithium-ion batteries
50. The characterisation of powerline communication-based smart battery cells in future energy storage system and electric vehicles