An efficient in situ electrochemical method to boost the performance of sodium vanadium phosphate cathodes by conductive polymer coating
Source abstract
Abstract
This study evaluates the impact of in situ electropolymerized poly(3,4-ethylenedioxythiophene) (PEDOT) coatings on Na 3 V 2 (PO 4 ) 3 (NVP) cathodes for sodium-ion batteries (SIB). Pristine bare and carbon-coated NVP samples served as both starting materials and references to highlight the effect of the electropolymerized coating. Successful PEDOT in situ electropolymerization was confirmed through SEM, Raman spectroscopy, and DSC, while X-ray diffraction demonstrated the preservation of the NVP crystalline structure. Electrochemical characterization revealed that PEDOT coating enhances electronic conductivity and Na + -ion transport kinetics. The carbon-coated NVP sample with in situ electropolymerized PEDOT coating delivered superior capacity (150 mAh·g −1 at C/10), excellent rate capability (60 mAh·g −1 at 10C), and capacity retention of 88% after 100 cycles at 1C (105 mAh·g −1 ). EIS revealed that PEDOT coating reduces charge-transfer resistance and stabilizes the electrode-electrolyte interface, thereby supporting improved long-term performance. These results confirm that in situ electropolymerized PEDOT provides an effective conductive and protective coating for NVP cathodes. Compared with conventional approaches such as chemical polymerization, integrating in situ carbon formation with a conformal in situ electrochemical PEDOT coating establishes a highly interconnected conductive network. This synergistic architecture significantly enhances sodium-ion storage performance by improving electrical conductivity, facilitating charge transfer, and promoting structural stability during cycling. • In situ electropolymerized PEDOT coating enhanced cathode for sodium-ion batteries. • PEDOT coating significantly boosted capacity beyond conventional carbon coatings. • Carbon and PEDOT form a synergistic conductive network for better energy storage. • The optimized material delivered high capacity and stable cycling.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (97)
Show source-provided references
1. Unleashing the potential of sodium‐ion batteries: current state and future directions for sustainable energy storage
2. Optimization strategies toward functional sodium‐ion batteries10.1002/eem2.12633 ↗
3. Sodium‐Ion batteries paving the way for grid energy storage
4. From li‐ion batteries toward na‐ion chemistries: challenges and opportunities10.1002/aenm.202001310 ↗
5. The scale‐up and commercialization of nonaqueous na‐ion battery technologies10.1002/aenm.201702869 ↗
6. Rational design of layered oxide materials for sodium-ion batteries
7. Towards greener and more sustainable batteries for electrical energy storage10.1038/nchem.2085 ↗
8. Advancement of technology towards developing Na-ion batteries10.1016/j.jpowsour.2017.12.053 ↗
9. Recent advances on flexible electrodes for Na-ion batteries and Li–S batteries10.1016/j.jechem.2018.06.011 ↗
10. Recent progress of layered transition metal oxide cathodes for sodium‐ion batteries
11. Review—research progress on layered transition metal oxide cathode materials for sodium ion batteries10.1149/1945-7111/abf9bf ↗
12. Prussian blue analogues for sodium‐ion batteries: past, present, and future10.1002/adma.202108384 ↗
13. Structurally stable, low H 2 O prussian blue analogs toward high performance sodium storage
14. Polyanion sodium vanadium phosphate for next generation of sodium‐ion batteries—A review
15. Low-cost, the key for the commercialization of the Na 3 V 2 (PO 4) 3 cathode10.1021/acs.iecr.3c04208 ↗
16. Research progress on electrochemical properties of Na 3 V 2 (PO 4) 3 as cathode material for sodium-ion batteries10.1021/acs.iecr.2c04054 ↗
17. Fast na+-ion transport in skeleton structures10.1016/0025-5408(76)90077-5 ↗
18. Performance of NASICON symmetric cell with ionic liquid electrolyte10.1149/1.3298903 ↗
19. Insights into the charge storage mechanism of Na3V2(PO4)3 cathode in sodium-ion batteries10.1007/s12034-023-02937-z ↗
20. The recent advances of NASICON-Na3V2(PO4)3 cathode materials for sodium-ion batteries10.1016/j.jssc.2022.123669 ↗
21. Production of pure vanadium: industry review and feasibility study of electron beam melt refining of V–Al alloys10.1007/s40831-021-00407-6 ↗
22. Exploration of a novel vanadium source for the Synthesis of a Na 3 V 2 (PO 4) 3 cathode of sodium-ion batteries10.1021/acssuschemeng.3c06339 ↗
23. Na 3 V 2 (PO 4) 3 : an advanced cathode for sodium-ion batteries10.1039/C8NR09391A ↗
24. Self-combustion synthesis of Na3V2(PO4)3 nanoparticles coated with carbon shell as cathode materials for sodium-ion batteries10.1016/j.electacta.2014.12.160 ↗
25. On the effect of carbon content for achieving a high performing Na3V2(PO4)3/C nanocomposite as cathode for sodium-ion batteries10.1016/j.jelechem.2016.11.064 ↗
26. Sol–gel design strategy for embedded Na3V2(PO4)3 particles into carbon matrices for high-performance sodium-ion batteries10.1016/j.carbon.2015.10.054 ↗
27. Ascorbic acid‐assisted synthesis of mesoporous sodium vanadium phosphate nanoparticles with highly sp 2 ‐coordinated carbon coatings as efficient cathode materials for rechargeable sodium‐ion batteries10.1002/chem.201602066 ↗
28. Enhanced high-rate performance of manganese substituted Na 3 V 2 (PO 4) 3/C as cathode for sodium-ion batteries10.1016/j.jpowsour.2016.02.066 ↗
29. Effect of iron substitution in the electrochemical performance of Na 3 V 2 (PO 4) 3 as Cathode for Na-Ion batteries10.1149/2.0151502jes ↗
30. Improvement in the energy density of Na 3 V 2 (PO 4) 3 by Mg substitution10.1002/celc.201700540 ↗
31. Nanoflake-constructed porous Na3V2(PO4)3/C hierarchical microspheres as a bicontinuous cathode for sodium-ion batteries applications10.1016/j.nanoen.2019.03.066 ↗
32. Self-sacrificed synthesis of three-dimensional Na3V2(PO4)3 nanofiber network for high-rate sodium–ion full batteries10.1016/j.nanoen.2016.03.018 ↗
33. Lithium batteries with polymer electrodes
34. Polymers with redox properties: materials for batteries, biosensors and more10.1039/c3py21118e ↗
35. Conducting‐Polymer/Iron‐Redox‐ couple composite cathodes for lithium secondary batteries10.1002/adma.200600369 ↗
36. Bifunctional conducting polymer coated CoP core–shell nanowires on carbon paper as a free‐standing anode for sodium ion batteries
37. Rapid microwave-solvothermal synthesis of phospho-olivine nanorods and their coating with a mixed conducting polymer for lithium ion batteries10.1016/j.elecom.2008.04.004 ↗
38. Synthesis and characterization of advanced Li3V2(PO4)3 nanocrystals@conducting polymer PEDOT for high energy lithium-ion batteries10.1016/j.apsusc.2016.09.156 ↗
39. Facile in situ synthesis of PEDOT conductor interface at the surface of MnO2 cathodes for enhanced aqueous zinc-ion batteries
40. Electrochemistry of conducting polymers—persistent models and new concepts10.1021/cr900226k ↗
41. PEDOT: cathode active material with high specific capacity in novel electrolyte system10.1016/j.electacta.2008.06.053 ↗
42. Poly(3,4-ethylenedioxythiophene) and its derivatives: past, present, and future10.1002/(SICI)1521-4095(200004)12:7<481::AID-ADMA481>3.0.CO;2-C ↗
43. Electrochemical in battery polymerization of poly(alkylenedioxythiophene) over lithium iron phosphate for high-performance cathodes10.1039/C4CP02796E ↗
44. Improving the cycling performance of LiFePO 4 cathode material by poly(3,4-ethylenedioxythiopene) coating10.1039/C4RA05286B ↗
45. A review on conducting organic polymers: concepts, applications, and potential environmental benefits10.1016/j.heliyon.2025.e42375 ↗
46. What can we learn about PEDOT:PSS morphology from molecular dynamics simulations of ionic diffusion?10.1021/acs.chemmater.3c00873 ↗
47. Chemical synthesis of poly(3,4-ethylenedioxythiophene)10.1016/S0379-6779(97)80828-4 ↗
48. Unexpectedly high electrochemical performances of a monoclinic Na 2.4 V 2 (PO 4) 3/conductive polymer composite for Na-ion batteries10.1039/C8TA06238B ↗
49. Surface-engineering enhanced sodium storage performance of Na3V2(PO4)3 cathode via in-situ self-decorated conducting polymer route10.1007/s11426-017-9125-y ↗
50. π-Conjugated polymers bearing electronic and optical functionalities. Preparation by organometallic polycondensations, properties, and their applications10.1246/bcsj.72.621 ↗
51. Doped poly(3,4-ethylenedioxythiophene) films: thermal, electromagnetical and morphological analysis10.1016/S0379-6779(98)01121-7 ↗
52. Intrinsically conducting polymers
53. Complexation between vanadium(V) and citrate: spectroscopic and structural characterization of a dinuclear vanadium(V) complex10.1023/A:1006947218366 ↗
54. Elschner · 2010
55. Discovery of a sodium-ordered form of Na 3 V 2 (PO 4) 3 below ambient temperature10.1021/acs.chemmater.5b02092 ↗
56. Crystal structure of Na 2 V 2 (PO 4) 3 , an intriguing phase spotted in the Na 3 V 2 (PO 4) 3 –Na 1 V 2 (PO 4) 3 system10.1021/acs.chemmater.1c04033 ↗
57. Electropolymerization of poly(3,4-ethylenedioxythiophene) onto polyvinyl alcohol-graphene quantum dot-cobalt oxide nanofiber composite for high-performance supercapacitor10.1016/j.electacta.2017.12.168 ↗
58. Realizing ultrahigh cycle life anode for sodium-ion batteries through heterostructure design and introducing electro active polymer coating10.1021/acsami.4c13139 ↗
59. Iron-based Prussian blue coupled with polydopamine film for advanced sodium-ion batteries10.1016/j.materresbull.2023.112351 ↗
60. Electrochemical and thermal properties of NASICON structured Na 3 V 2 (PO 4) 3 as a sodium rechargeable battery cathode: a combined experimental and theoretical study10.1149/2.015209jes ↗
61. Stability and scalability of Na3V2(PO4)3 cathode material for next-generation sodium-ion batteries10.13005/ojc/410211 ↗
62. NaV3O8/poly(3,4-ethylenedioxythiophene) composites as high-rate and long-lifespan cathode materials for reversible sodium storage10.1007/s12598-020-01452-y ↗
63. Metallic conductivity of highly doped poly(3,4-ethylenedioxythiophene)10.1016/S0379-6779(98)00758-9 ↗
64. Surface-enhanced raman spectroscopy of phosphate anions: adsorption on silver, gold, and copper electrodes10.1021/jp970097k ↗
65. Studies of dopant effects in poly(3,4‐ethylenedi‐oxythiophene) using raman spectroscopy10.1002/jrs.1545 ↗
66. Conductive polymers for next-generation energy storage systems: recent progress and new functions10.1039/C6MH00165C ↗
67. Hollow, spherical, Poly(3,4-ethylenedioxythiophene)-Bearing methanethiol as a gold stabilizer for high-efficiency electrochemical sensors10.1149/2.0021809jes ↗
68. Adsorption of 3,4-ethylenedioxythiophene (EDOT) on noble metal surfaces: a photoemission and X-ray absorption study10.1016/j.elspec.2009.03.014 ↗
69. Influence of different polymers on photoluminescence of colloidal ZnO nanocrystals10.1007/s11051-022-05650-w ↗
70. Dynamic stability of organic conducting polymers and its replication in electrical conduction and degradation mechanisms10.1002/adfm.201002185 ↗
71. Morphology and properties of PEDOT:PSS/soft polymer blends through hydrogen bonding interaction and their pressure sensor application10.1039/D0TC00559B ↗
72. Polymer electrolyte system based on carrageenan-poly(3,4- ethylenedioxythiophene) (PEDOT) composite for dye sensitized solar cell10.1088/1757-899X/79/1/012020 ↗
73. The temperature-dependent microstructure of PEDOT/PSS films: insights from morphological, mechanical and electrical analyses10.1039/C4TC01593B ↗
74. Insight into preparation of Fe-Doped Na 3 V 2 (PO 4) 3 @C from aspects of particle morphology design, crystal structure modulation, and carbon graphitization regulation10.1021/acsami.8b21257 ↗
75. Na 3 V 2 (PO 4) 3/C synthesized by a facile solid-phase method assisted with agarose as a high-performance cathode for sodium-ion batteries10.1039/C7TA01946G ↗
76. Substantial doping engineering in Na3V2-xFex(PO4)3 (0≤x≤0.15) as high-rate cathode for sodium-ion battery10.1016/j.matdes.2019.108287 ↗
77. Hard carbon wrapped Na 3 V 2 (PO 4) 3 @C porous composite extending cycling lifespan for sodium-ion batteries10.1021/acsami.7b14006 ↗
78. A cathode ray polarograph. Part II.—The current-voltage curves10.1039/TF9484400327 ↗
79. Surface capacitive contributions: towards high rate anode materials for sodium ion batteries10.1016/j.nanoen.2014.12.032 ↗
80. Pseudocapacitive charge storage properties of Na2/3Co2/3Mn2/9Ni1/9O2 in Na-ion batteries10.1016/j.electacta.2018.04.150 ↗
81. Pseudocapacitive contributions to charge storage in highly ordered mesoporous group V transition metal oxides with iso-oriented layered nanocrystalline domains10.1021/ja9106385 ↗
82. Bard · 2022
83. Li + Ion insertion in TiO 2 (Anatase). 2. Voltammetry on nanoporous films10.1021/jp970490q ↗
84. Advances in pseudocapacitive and battery-like electrode materials for high performance supercapacitors10.1039/D2TA02357A ↗
85. Array of nanosheets render ultrafast and high-capacity Na-ion storage by tunable pseudocapacitance10.1038/ncomms12122 ↗
86. Design advanced porous Polyaniline-PEDOT:PSS composite as high performance cathode for sodium ion batteries10.1016/j.coco.2021.100674 ↗
87. Towards sustainable and versatile energy storage devices: an overview of organic electrode materials10.1039/c3ee40709h ↗
88. Disentangling redox properties and capacitance in solution-processed conjugated polymers10.1021/acs.chemmater.9b00528 ↗
89. Ordered mesoporous α-MoO3 with iso-oriented nanocrystalline walls for thin-film pseudocapacitors10.1038/nmat2612 ↗
90. Polymer crystallinity controls water uptake in glycol side-chain polymer organic electrochemical transistors10.1021/jacs.8b12640 ↗
91. High-rate electrochemical energy storage through Li+ intercalation pseudocapacitance10.1038/nmat3601 ↗
92. Modeling and applications of electrochemical impedance spectroscopy (EIS) for lithium-ion batteries10.33961/jecst.2019.00528 ↗
93. Improving the performance of potassium birnessite cathodes for sodium‐ion batteries by partial ion exchange10.1002/bte2.20240065 ↗
94. Advances in electrode/electrolyte interphase for sodium-ion batteries from half cells to full cells, Cell rep
95. Study of the formation and evolution of solid electrolyte interface via in-situ electrochemical impedance spectroscopy10.1016/j.apsusc.2022.153572 ↗
96. Heavily doped poly(3,4‐ethylenedioxythiophene) thin films with high carrier mobility deposited using oxidative CVD: conductivity stability and carrier transport10.1002/adfm.201401282 ↗
97. Building ultraconformal protective layers on both secondary and primary particles of layered lithium transition metal oxide cathodes10.1038/s41560-019-0387-1 ↗