Effect of polyacrylic binder solution pH on silicon electrode performance
Source abstract
Abstract
Poly (acrylic acid) (PAA) and its analogue poly (ethylene-alt-maleic acid) (PEaMAc) are evaluated as a binder for silicon anodes. The effect of binder solution pH on slurry processability and electrochemical performance is evaluated. Rheological measurements indicate stronger binder–Si interactions at low pH, resulting in fewer cracks in the electrode and, consequently, higher electronic conductivity within the electrode. Thermogravimetric analysis evidences increasing active material oxidation with increasing pH. Electrochemical data further confirm enhanced silicon oxidation and highlight the electrochemical inactivity of SiO 2 . Unwanted oxidation was identified as a major factor responsible for the reduced specific capacity of the cell. As a result, both binders perform best at pH 5, where silicon oxidation is minimized. At this pH, Si||Li cells employing PEaMAc deliver average capacities of 2585 mAh g −1 at C/10 and 1012 mAh g −1 at 3C, outperforming PAA (2442 mAh g −1 at C/10 and 755 mAh g −1 at 3C). The superior performance of PEaMAc was attributed to an improved Li + transport along its polymeric backbone. Overall, low pH favors strong binder–Si interactions yielding high quality electrodes. It also prevents unwanted Si oxidation, which strongly affects cell performance. Finally, PEaMAc is identified as a promising alternative to PAA. • PAA and PEaMAc evaluated as binders for silicon anodes. • Effect of slurry pH: high pH drives Si oxidation, reducing cell capacity. • Both binders perform best after processing at pH 5. • PEaMAc delivers better performance than PAA. • PEaMAc's enables faster Li + transport than PAA.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Supercapacitor Materials and Fabrication · Analytical Chemistry and Sensors · Neuroscience and Neural Engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Recent progress and challenges in silicon-based anode materials for lithium-ion batteries10.1039/D3IM00115F ↗
2. Innovative solutions for high-performance silicon anodes in lithium-ion batteries: overcoming challenges and real-world applications10.1007/s40820-024-01388-3 ↗
3. Constructing Pure Si Anodes for Advanced Lithium Batteries10.1021/acs.accounts.3c00308 ↗
4. Solid-state silicon anode with extremely high initial coulombic efficiency10.1039/D2EE04057C ↗
5. Elucidating 'Transfer-Lithiation' from Graphite to Si within Composite Anodes during Pre-Lithiation and Regular Charging
6. Advances and future prospects of micro‐silicon anodes for high‐energy‐density lithium‐ion batteries: a comprehensive review
7. Nanostructuring strategies for silicon‐Based anodes in lithium‐ion batteries: tuning areal silicon loading, SEI formation/irreversible capacity loss, rate capability retention and electrode durability10.1002/batt.202300049 ↗
8. High‐performance silicon anodes enabled by multifunctional ultrafine silica nanoparticle‐embedded carbon coatings for lithium‐ion batteries10.1002/aenm.202500189 ↗
9. Spatial‐dependent coupling of electrochemistry, mass transport, and stress in silicon‐graphite composite electrodes for lithium‐ion batteries
10. Lithium-ion battery degradation: measuring rapid loss of active silicon in silicon-graphite composite electrodes10.1021/acsaem.2c02047 ↗
11. Design criteria for silicon‐based anode binders in half and full cells10.1002/aenm.202200850 ↗
12. Design of multifunctional polymeric binders in silicon anodes for lithium‐ion batteries10.1002/cey2.356 ↗
13. Molecular design principles for polymeric binders in silicon anodes10.1039/C9ME00162J ↗
14. Progress of 3D network binders in silicon anodes for lithium ion batteries10.1039/D0TA07713E ↗
15. Application and development of silicon anode binders for lithium-ion batteries10.3390/ma16124266 ↗
16. Progress of binder structures in silicon-based anodes for advanced lithium-ion batteries: a mini review10.3389/fchem.2021.712225 ↗
17. Role of polyacrylic acid (PAA) binder on the solid electrolyte interphase in silicon anodes10.1021/acs.chemmater.8b05020 ↗
18. Toward efficient binders for Li-ion battery Si-based anodes: polyacrylic acid10.1021/am100871y ↗
19. Partially neutralized polyacrylic acid/poly(vinyl alcohol) blends as effective binders for high-performance silicon anodes in lithium-ion batteries10.1021/acsaem.8b01277 ↗
20. The effects of lithium ions and pH on the function of polyacrylic acid binder for silicon anodes10.1149/1945-7111/aceab1 ↗
21. Restorable neutralization of poly(acrylic acid) binders toward balanced processing properties and cycling performance for silicon anodes in lithium-ion batteries10.1021/acsami.0c18559 ↗
22. Understanding of pre-lithiation of poly(acrylic acid) binder: striking the balances between the cycling performance and slurry stability for silicon-graphite composite electrodes in Li-ion batteries10.1016/j.jpowsour.2019.01.068 ↗
23. Influence of the polyacrylic acid binder neutralization degree on the initial electrochemical behavior of a silicon/graphite electrode10.1021/acsami.1c06683 ↗
24. Engineering prelithiation of polyacrylic acid binder: a universal strategy to boost initial coulombic efficiency for high‐areal‐capacity si‐based anodes
25. Hydrogen generation by reaction of Si nanopowder with neutral water10.1007/s11051-017-3873-z ↗
26. Partially oxidized silicon particles for stable aqueous slurries and practical large-scale making of Si-Based electrodes10.1149/2.0301508jes ↗
27. Silicon nanoparticles: stability in aqueous slurries and the optimization of the oxide layer thickness for optimal electrochemical performance10.1021/acsami.7b09149 ↗
28. Quantifying gas generation from slurries used in fabrication of Si-containing electrodes for lithium-ion cells10.1016/j.jpowsour.2018.05.071 ↗
29. Si Oxidation and H 2 Gassing During Aqueous Slurry Preparation for Li-Ion Battery Anodes10.1021/acs.jpcc.8b01062 ↗
30. Poly(ethylene-alt-maleic acid)-based binders for silicon anodes10.1021/acsapm.4c03625 ↗
31. Segmental dynamics of poly(acrylic acid) in polyelectrolyte complex coacervates studied by spin-label EPR spectroscopy10.1021/acs.macromol.6b01863 ↗
32. Ethylene-maleic anhydride copolymers and derivatives. Potentiometric titrations and interactions with polypeptides10.1021/j100700a014 ↗
33. Determination of the Carboxyl dissociation degree and pKa value of Mono and polyacid solutions by FTIR titration10.1002/macp.202000334 ↗
34. In situ FTIR-ATR examination of poly(acrylic acid) adsorbed onto hematite at low pH10.1021/la027012d ↗
35. Lithium substituted poly(acrylic acid) as a mechanically robust binder for low-cost silicon microparticle electrodes10.1021/acsaem.0c01923 ↗
36. Shear thickening and scaling of the elastic modulus in a fractal colloidal system with attractive interactions10.1103/PhysRevE.77.060402 ↗
37. Bio-inspired rigid helical network for silicon anode binders enabled by metal-ion-mediated conformation regulation10.1016/j.jcis.2025.139785 ↗
38. Effect of silica nanoparticle size on the stability of alumina/silica suspensions10.1111/j.1151-2916.2001.tb00731.x ↗
39. Zeta potentials and yield stresses of silica suspensions in concentrated monovalent electrolytes: isoelectric point shift and additional attraction10.1006/jcis.2002.8250 ↗
40. Mechanical properties of a waterborne pressure-sensitive adhesive with a percolating poly(acrylic acid)-based diblock copolymer network: effect of pH10.1016/j.jcis.2015.01.074 ↗
41. Surface vibrational modes of silanol groups on silica10.1021/j100182a068 ↗
42. Comparison between the polarized Fourier-transform infrared spectra of aged porous silicon and amorphous silicon dioxide films on Si (100) surface10.1016/S0022-2860(99)00003-4 ↗
43. Imidazole-based LiHDI salt for SEI optimization in silicon anodes10.1016/j.jpowsour.2025.238289 ↗
44. Study on polymer binders for high-capacity SiO negative electrode of Li-Ion batteries10.1021/jp201691g ↗
45. Unraveling the reaction mechanisms of SiO anodes for Li-Ion batteries by combining in situ 7Li and ex situ 7Li/29Si solid-state NMR spectroscopy10.1021/jacs.9b01589 ↗
46. 7 Li and 29 Si NMR Enabled by High-Density Cellulose-Based Electrodes in the Lithiation Process in Silicon and Silicon Monoxide Anodes10.1021/acs.jpcc.8b11963 ↗
47. A review on mechanical, electrical, chemical, and electrochemical properties of coating materials for silicon anodes in lithium-ion batteries
48. Rotational dynamics of spin-labeled polyacid chain segments in polyelectrolyte complexes studied by CW EPR spectroscopy10.1021/acs.macromol.5b00474 ↗
49. Proton binding by linear, branched, and hyperbranched polyelectrolytes10.1016/j.polymer.2010.08.067 ↗