Influence of sintering temperature on the performance of garnet-based all-solid-state Li-metal batteries
Source abstract
Abstract
All-solid-state Li-metal batteries (ASSLMBs) based on Li 7 La 3 Zr 2 O 7 (LLZO) solid electrolytes (SEs) are promising candidates for next-generation energy storage devices. Although the composite cathode obtained by sintering well-mixed LiCoO 2 (LCO) and LLZO at high temperature can overcome the problem of low ionic conductivity within the cathode, the capacity and cycling stability of such LLZO-based ASSLMBs are still not satisfactory. Systematically investigating the impact of sintering conditions on ASSLMB helps identify limiting factors and guides further optimization. Herein, we investigated the influence of sintering temperature on the phase composition, microstructure and electrochemical performance of LLZO-based ASSLMBs. It was found that low sintering temperature leads to a loose microstructure within the composite cathode, resulting in high impedance, low LCO utilization and rapid capacity degradation. Increasing the sintering temperature results in a denser composite cathode, thereby reducing impedance and improving cycling stability. Meanwhile, side reactions within the composite cathode become severer, lowering the initial Coulombic Efficiency (CE). Continuously increasing the sintering temperature ultimately leads to early battery failure, likely due to excessive stress in the overly dense cathode. Overall, our study shows that sintering temperature has multiple influences on the performance of LLZO-based ASSLMBs. Further performance optimization requires balancing trade-offs among multiple limiting factors. • LCO/LLZO composite cathode was co-sintered onto LLZO to build ASSLMB. • < 895 °C, loose cathode structure, high impedance, fast capacity degradation. • Higher sintering temperature, denser microstructure but severer side reactions. • ≥ 995 °C, early battery failure, likely due to excessive stress. • Side reaction byproduct Li-La-Co-O was identified by Raman-EDX-mapping and XRD.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Thermal Expansion and Ionic Conductivity
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. Current Li-Ion battery technologies in electric vehicles and opportunities for advancements10.3390/en12061074 ↗
2. 30 years of lithium-ion batteries10.1002/adma.201800561 ↗
3. Strategies toward the development of high-energy-density lithium batteries10.1016/j.est.2024.111666 ↗
4. Design and optimization of lithium-ion battery as an efficient energy storage device for electric vehicles: a comprehensive review10.1016/j.est.2023.108033 ↗
5. A review on the optimization of electrolytes to enhance lithium-ion batteries' safety and performance under abuse conditions10.1016/j.est.2024.113439 ↗
6. Batteries with high theoretical energy densities10.1016/j.ensm.2019.12.024 ↗
7. Opportunities and challenges of high-energy lithium metal batteries for electric vehicle applications10.1021/acsenergylett.0c01545 ↗
8. Pathways for practical high-energy long-cycling lithium metal batteries10.1038/s41560-019-0338-x ↗
9. A review of composite lithium metal anode for practical applications
10. Key aspects of lithium metal anodes for lithium metal batteries10.1002/smll.201900687 ↗
11. Advanced electrolytes enabling safe and stable rechargeable Li-Metal batteries: progress and prospects10.1002/adfm.202105253 ↗
12. Developing high-performance lithium metal anode in liquid electrolytes: challenges and progress10.1002/adma.201706375 ↗
13. Advanced liquid electrolytes for rechargeable Li metal batteries10.1002/adfm.201910777 ↗
14. Safety hazards of lithium metal batteries: from the perspective of lithium dendrites and thermal runaway10.1021/acs.energyfuels.5c00728 ↗
15. Thermally stable and nonflammable electrolytes for lithium metal batteries: progress and perspectives10.1002/smsc.202170025 ↗
16. Dendrites in lithium metal anodes: suppression, regulation, and elimination10.1021/acs.accounts.9b00437 ↗
17. Thermodynamic understanding of Li-Dendrite formation10.1016/j.joule.2020.06.016 ↗
18. An outlook on low-volume-change lithium metal anodes for long-life batteries10.1021/acscentsci.0c00351 ↗
19. A review on the failure and regulation of solid electrolyte interphase in lithium batteries10.1016/j.jechem.2020.11.016 ↗
20. Fire safety challenge of lithium metal batteries and advanced strategies for improving intrinsic safety10.1016/j.jechem.2025.06.065 ↗
21. Dual-salts electrolyte with fluoroethylene carbonate additive for high-voltage Li-metal batteries10.3390/batteries9090477 ↗
22. Liquid electrolyte: the nexus of practical lithium metal batteries10.1016/j.joule.2021.12.018 ↗
23. Recent progress in liquid electrolytes for high-energy lithium–metal batteries: from molecular engineering to applications10.1002/adfm.202409431 ↗
24. Recent progress of artificial SEI for high-energy lithium batteries: mechanisms, fabrication strategies and structure-performance relationships10.1016/j.nanoen.2025.111219 ↗
25. Overcoming chemical and mechanical instabilities in lithium metal anodes with sustainable and eco-friendly artificial SEI layer
26. Toward realistic full cells with protected lithium-metal-anodes: the effect of an adaptive self-healing artificial SEI
27. Dendrite-free and minimum volume change Li metal anode achieved by three-dimensional artificial interlayers10.1016/j.ensm.2018.07.015 ↗
28. Insulative microfiber 3D matrix as a host material minimizing volume change of the anode of Li metal batteries10.1021/acsenergylett.7b00149 ↗
29. From nanoscale interface characterization to sustainable energy storage using all-solid-state batteries10.1038/s41565-020-0657-x ↗
30. Lithium battery chemistries enabled by solid-state electrolytes10.1038/natrevmats.2016.103 ↗
31. Fast lithium ion conduction in garnet-type Li7La3Zr2O1210.1002/anie.200701144 ↗
32. Garnet-type solid-state electrolytes: materials, interfaces, and batteries10.1021/acs.chemrev.9b00427 ↗
33. Challenges and perspectives of garnet solid electrolytes for all solid-state lithium batteries10.1016/j.jpowsour.2018.04.019 ↗
34. An efficient multi-doping strategy to enhance Li-ion conductivity in the garnet-type solid electrolyte Li7La3Zr2O1210.1039/C9TA00417C ↗
35. Enhanced mechanical strength and ionic conductivity of LLZO solid electrolytes by oscillatory pressure sintering10.1016/j.ceramint.2019.05.241 ↗
36. Reducing impedance at a Li-metal anode/garnet-type electrolyte interface implementing chemically resolvable in layers10.1021/acsami.1c25257 ↗
37. Surface chemistry mechanism of ultra-low interfacial resistance in the solid-state electrolyte Li7La3Zr2O1210.1021/acs.chemmater.7b03002 ↗
38. Li7La3Zr2O12 interface modification for Li dendrite prevention10.1021/acsami.6b00831 ↗
39. Spotlighting composite cathode heterogeneity: challenges and strategies for all-solid-state batteries10.1021/acsaem.5c00870 ↗
40. Microstructural modeling of composite cathodes for all-solid-state batteries10.1021/acs.jpcc.8b11043 ↗
41. Electrode morphology in all-solid-state lithium secondary batteries consisting of LiNi1/3Co1/3Mn1/3O2 and Li2S-P2S5 solid electrolytes10.1016/j.ssi.2015.09.010 ↗
42. Modification of cathode surface for sulfide electrolyte‐based all‐solid‐state batteries using sulfurized LiNbO3 coating10.1002/batt.202500188 ↗
43. Challenges and opportunities in composite cathode production of polymer-based solid-state batteries10.1016/j.procir.2024.10.112 ↗
44. All-solid-state lithium-ion and lithium metal batteries – paving the way to large-scale production10.1016/j.jpowsour.2018.02.062 ↗
45. All ceramic cathode composite design and manufacturing towards low interfacial resistance for garnet-based solid-state lithium batteries10.1039/D0EE02062A ↗
46. Cathode-electrolyte material interactions during manufacturing of inorganic solid-state lithium batteries10.1007/s10832-016-0062-x ↗
47. Thermal expansion in the garnet-type solid electrolyte (Li7−xAlx/3)La3Zr2O12 as a function of Al content10.1016/j.jallcom.2015.05.067 ↗
48. Elastic properties of lithium cobalt oxide (LiCoO2)10.1016/j.jascer.2017.03.001 ↗
49. A garnet structure-based all-solid-state Li battery without interface modification: resolving incompatibility issues on positive electrodes10.1039/C8SE00436F ↗
50. All-solid-state garnet-based lithium batteries at work-in operando TEM investigations of delithiation/lithiation process and capacity degradation mechanism
51. Study of LiCoO2/Li7La3Zr2O12:Ta interface degradation in all-solid-state lithium batteries10.1021/acsami.1c22246 ↗
52. Impact of oxygen vacancies in LiCoO2 on the electrochemical performance of garnet-based all-solid-state Li-Metal batteries
53. Raman imaging analysis of local crystal structures in LiCoO2 thin films calcined at different temperatures10.2116/analsci.33.853 ↗
54. Raman diagnostics of LiCoO2 electrodes for lithium-ion batteries10.1016/j.jpowsour.2014.01.084 ↗
55. Hydrothermal synthesis of single-crystalline nanocubes of Co3O410.1016/j.matlet.2007.07.037 ↗
56. Influence of sintering additives on densification and Li+ conductivity of Al doped Li7La3Zr2O12 lithium garnet10.1039/C4RA08674K ↗
57. Effect of simultaneous substitution of Y and Ta on the stabilization of cubic phase, microstructure, and Li+ conductivity of Li7La3Zr2O12 Lithium garnet10.1021/am503731h ↗
58. Cubic phases of garnet-type Li7La3Zr2O12: the role of hydration10.1039/c3ta11996c ↗
59. Tetragonal vs. cubic phase stability in Al-free Ta doped Li7La3Zr2O12 (LLZO)10.1039/C4TA02099E ↗
60. Raman and infrared spectral studies of anhydrous Li2CO3 and Na2CO310.1063/1.1674754 ↗
61. Controlling the lithium proton exchange of LLZO to enable reproducible processing and performance optimization10.1039/D0TA11096E ↗
62. The riddle of dark LLZO: cobalt diffusion in garnet separators of solid‐state lithium batteries
63. Deformation and stresses in solid-state composite battery cathodes10.1016/j.jpowsour.2019.227116 ↗
64. A full oxide-based solid-state lithium battery and its unexpected cathode degradation mechanism10.1021/acsenergylett.3c01759 ↗
65. A guideline to mitigate interfacial degradation processes in solid‐state batteries caused by cross diffusion10.1002/adfm.202303680 ↗