Tetrahedral Zn2+ doping LiNi0.6Mn0.2Co0.2O2 improves discharge capacity retention by altering surface Ni valence during cycling and preventing oxygen evolution
Source abstract
Abstract
5 mol-% Zn 2+ was added to the co-precipitation synthesis of LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC622) to understand Zn's effect on the structural and electronic properties of NMC622. Zn is determined to successfully dope into the NMC crystal lattice as there is an increase in d -spacing along the [003], [104], and [110] directions and an increase in molar volume (100.75 cm 3 mol -1 for NMC622 and 101.00 cm 3 mol -1 for Zn-NMC). Through XPS, Zn is determined to dope on the tetrahedral 6c Wyckoff site in the NMC structure and TEM-EDS reveals that despite a slight ZnO impurity phase, 1.4 mol-% Zn successfully dopes into the crystal structure. Furthermore, cyclic voltammetry shows a suppressed anodic wave associated with oxygen evolution and EIS demonstrates that Zn-doped NMC decreases charge transfer resistance and increases Li diffusion by an order of magnitude. After the formation cycles, NMC has a higher 1 C accessible capacity, 141 mAh/g, over Zn-NMC (132 mAh/g), but after long term cycling Zn-NMC has a higher accessible capacity (117 mAh/g compared to 96 mAh/g for NMC) and increases discharge capacity retention by 18% leading to longer cycle life. • Tetrahedral Zn doping alleviates electrostatic repulsion preventing oxygen evolution. • Zn-NMC increases capacity retention by 18% leading to longer cycle life. • Zn doping increases Li diffusion and decreases SEI and charge transfer resistance.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (66)
Show source-provided references
1. Nickel-rich Nickel Manganese Cobalt (NMC622) cathode lithiation mechanism and extended cycling effects using operando X-ray absorption spectroscopy10.1021/acs.jpcc.0c08095 ↗
2. Comprehensive overview of electric vehicle batteries market
3. McKerracher
4. LixCoO2 (0<x<-1): a new cathode material for batteries of high energy density10.1016/0025-5408(80)90012-4 ↗
5. Lithium mobility in the layered oxide Li1−xCoO210.1016/0167-2738(85)90117-1 ↗
6. Synthesis and characterization of LiNi1−x−yCoxMnyO2 as the cathode materials of secondary lithium batteries10.1016/S0378-7753(99)00221-9 ↗
7. Zhonghua · 2005
8. Theoretical evaluation of high-energy lithium metal phosphate cathode materials in Li-ion batteries10.1016/j.jpowsour.2006.12.046 ↗
9. Al-doped Ni-rich cathode powders prepared from the precursor powders with fine size and spherical shape10.1016/j.electacta.2007.05.064 ↗
10. The reactivity of delithiated Li(Ni1/3Co1/3Mn1/3)O2, Li(Ni0.8Co0.15Al0.05)O2 or LiCoO2 with non-aqueous electrolyte10.1016/j.elecom.2007.07.033 ↗
11. Phospho-olivines as positive-electrode materials for rechargeable lithium batteries10.1149/1.1837571 ↗
12. Lithium insertion into manganese spinels10.1016/0025-5408(83)90138-1 ↗
13. Assessment of battery technologies for future of electro-mobility in emerging markets
14. Ni-Rich/Co-Poor layered cathode for automotive Li-Ion batteries: promises and challenges10.1002/aenm.201903864 ↗
15. Perspectives on Li-ion battery categories for electric vehicle applications: a review of state of the art10.1002/er.7993 ↗
16. Current Li-Ion battery technologies in electric vehicles and opportunities for advancements10.3390/en12061074 ↗
17. Sustainability of battery technologies: today and tomorrow10.1021/acssuschemeng.1c02909 ↗
18. Structural degradation of high voltage lithium nickel manganese cobalt oxide (NMC) cathodes in solid-state batteries and implications for next generation energy storage10.1021/acsaem.9b02230 ↗
19. Mechanical and structural degradation of LiNixMnyCozO2 cathode in Li-Ion batteries: an experimental study10.1149/2.1751713jes ↗
20. Degradation mechanisms and mitigation strategies of nickel-rich NMC-based lithium-ion batteries10.1007/s41918-019-00053-3 ↗
21. Degradation and aging routes of Ni-Rich cathode based Li-Ion batteries10.3390/batteries6010008 ↗
22. Enhancing the cycling stability of Ni-rich LiNi0.6Co0.2Mn0.2O2 cathode at a high cutoff voltage with Ta doping10.1021/acssuschemeng.9b05560 ↗
23. Correlated biphasic features of improved rate capability upon Ga doping in LiNi0.6Co0.2Mn0.2O210.1039/D1TA05676J ↗
24. Stabilizing the structure of nickel-rich lithiated oxides via Cr doping as cathode with boosted high-voltage/temperature cycling performance for Li-ion battery10.1002/ente.201900498 ↗
25. Mo doping of layered Li (NixMnyCo1−x−y−z) O2 cathode materials for lithium-ion batteries10.1002/er.4121 ↗
26. Stabilizing nickel-rich layered cathode materials by a high-charge cation doping strategy: zirconium-doped LiNi0.6Co0.2Mn0.2O210.1039/C6TA06740A ↗
27. Addressing the high-voltage structural and electrochemical instability of Ni-Containing layered transition metal (TM) oxide cathodes by “Blocking” the “TM-Migration” pathway in the lattice10.1021/acsami.1c01347 ↗
28. Understanding the effects of tetrahedral site occupancy by the Zn dopant in Li-NMCs toward high-voltage compositional–structural–mechanical stability via operando and 3D atom probe tomography studies10.1021/acsami.2c15054 ↗
29. Cracking vs. surface reactivity in high-nickel cathodes for lithium-ion batteries10.1016/j.joule.2023.09.006 ↗
30. Effect of Zn, Cu and Mg doping on the structural characteristic of LiNi0.6Mn0.2Co0.2O2 (NMC622)
31. Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenides10.1107/S0567739476001551 ↗
32. Cu doping increases capacity retention in LiNi0.6Mn0.2Co0.2O2 (NMC622) by altering the potential of the Ni-Based redox couple and inhibiting particle pulverization10.1021/acsaem.4c01450 ↗
33. 2019
34. Probing sources of capacity fade in LiNi0.6Mn0.2Co0.2O2 (NMC622): an operando XRD study of Li/NMC622 batteries during extended cycling10.1021/acs.jpcc.0c00262 ↗
35. Thermodynamic analysis of LiNi0.6Mn0.2Co0.2O2 (NMC622) voltage hysteresis induced through high voltage charge10.1021/acsaem.1c02334 ↗
36. Effect of TiOx surface modification on the electrochemical performances of Ni-Rich (NMC-622) cathode material for lithium-ion batteries10.1021/acsaem.1c01309 ↗
37. 2005
38. Pristine and coated LiNi1/3Mn1/3Co1/3O2 as positive electrode materials for li-ion batteries10.17515/resm2015.07en0315 ↗
39. GSAS-II: the genesis of a modern open-source all purpose crystallography software package10.1107/S0021889813003531 ↗
40. 2023
41. A profile refinement method for nuclear and magnetic structures10.1107/S0021889869006558 ↗
42. VESTA 3 for three-dimensional visualization of crystal, volumetric and morphology data10.1107/S0021889811038970 ↗
43. Systematic and collaborative approach to problem solving using X-ray photoelectron spectroscopy10.1016/j.apsadv.2021.100112 ↗
44. 2023
45. Quantitative analysis of Ni2+/Ni3+ in Li[NixMnyCoz]O2 cathode materials: Non-linear least-squares fitting of XPS spectra10.1016/j.apsusc.2018.02.114 ↗
46. Factors influencing the layered to spinel-like phase transition in layered oxide cathodes10.1149/1.1497171 ↗
47. Statistics
48. Insights on the fundamental lithium storage behavior of all-solid-state lithium batteries containing the LiNi0.8Co0.15Al0.05O2 cathode and sulfide electrolyte10.1016/j.jpowsour.2016.01.039 ↗
49. Optimization of Ni2+/Ni3+ ratio in layered Li(Ni,Mn,Co)O2 cathodes for better electrochemistry10.1016/j.jpowsour.2007.06.051 ↗
50. Na-doped Ni-rich LiNi0.5Co0.2Mn0.3O2 cathode material with both high rate capability and high tap density for lithium ion batteries10.1039/C4DT01611D ↗
51. Nasicon-type surface functional modification in core–shell LiNi0.5Mn0.3Co0.2O2@NaTi2(PO4)3 cathode enhances its high-voltage cycling stability and rate capacity toward Li-Ion batteries10.1021/acsami.7b15808 ↗
52. Structural evolution and capacity degradation mechanism of LiNi0.6Mn0.2Co0.2O2 cathode materials10.1016/j.jpowsour.2018.08.056 ↗
53. Electrochemical evaluation of LiNi0.5Mn0.3Co0.2O2, LiNi0.6Mn0.2Co0.2O2, and LiNi0.8Mn0.1Co0.1O2 cathode materials for lithium-ion batteries: from half-coin cell to pouch cell10.1007/s00706-022-02995-9 ↗
54. Unraveling the voltage-fade mechanism in high-energy-density lithium-ion batteries: origin of the tetrahedral cations for spinel conversion10.1021/cm5031415 ↗
55. A review on nickel-rich nickel–cobalt–manganese ternary cathode materials LiNi0.6Co0.2Mn0.2O2 for lithium-ion batteries: performance enhancement by modification10.1039/D3MH01151H ↗
56. Life cycle assessment of battery electric vehicles: implications of future electricity mix and different battery end-of-life management10.1016/j.scitotenv.2022.154859 ↗
57. Quantifying EV battery end-of-life through analysis of travel needs with vehicle powertrain models10.1016/j.jpowsour.2015.01.072 ↗
58. In situ X-ray diffraction study of layered li–ni–mn–co oxides: effect of particle size and structural stability of core–shell materials10.1021/acs.chemmater.5b03500 ↗
59. Modeling and applications of electrochemical impedance spectroscopy (EIS) for lithium-ion batteries10.33961/jecst.2019.00528 ↗
60. Improved electrode kinetics in lithium manganospinel nanoparticles synthesized by hydrothermal methods: identifying and eliminating oxygen vacancies10.1039/C1JM15583K ↗
61. Formation of the spinel phase in the layered composite cathode used in Li-Ion batteries10.1021/nn305065u ↗
62. Suppressing Ni/Li disordering in LiNi0.6Mn0.2Co0.2O2 cathode material for Li-ion batteries by rare earth element doping10.1016/j.egyr.2022.03.029 ↗
63. The enhanced electrochemical performance of LiNi0.6Co0.2Mn0.2O2 cathode materials by low temperature fluorine substitution10.1016/j.electacta.2013.02.037 ↗
64. Synthesis, electrochemical investigation and structural analysis of doped Li[Ni0.6Mn0.2Co0.2−xMx]O2 (x = 0, 0.05; M = Al, Fe, Sn) cathode materials10.1016/j.jpowsour.2018.02.080 ↗
65. Influence of Mg2+ doping on the structure and electrochemical performances of layered LiNi0.6Co0.2−xMn0.2MgxO2 cathode materials10.1016/j.jallcom.2016.02.119 ↗
66. Investigation on the effect of Na doping on structure and Li-ion kinetics of layered LiNi0.6Mn0.2Co0.2O2 cathode material10.1016/j.electacta.2016.01.139 ↗