Electrochemically-driven formation of Intermetallic Cu3ZnLi2 alters Li-transport in nanostructured bimetallic battery anode
Source abstract
Abstract
The role of Li-based batteries in the electrification of society cannot be understated, however their operational lifetime is often limited by the formation of dendrites, i.e. the localised deposition of Li that can cause shorts between the two electrodes leading to the failure of the battery. Nanocrystalline bimetallic current collectors can be used for anode-free Li-metal batteries, with improved Li plating and limited or suppressed formation of dendrites. Here, we demonstrate that the microstructure of an α-Brass current collector, Cu 63% Zn 37%, used in an anode-free Li-metal battery evolves during cycling. It initially had a nanocrystalline deformation layer approximately 80 nm in thickness after polishing. After 100 cycles, the initial deformed brass layer was partially converted to a ternary Laves phase Cu 3 ZnLi 2 within a nanocrystalline brass matrix that grew to 200 – 250 nm in thickness. Upon Li stripping, the phase partially decomposes electrochemically, but what remains can sequester Li, thus forming “dead Li” thereby contributing to capacity loss. We propose a mechanism for the microstructural evolution including dynamic recrystallization and phase formation. Since this ternary Laves phase emerges during electrochemical cycling alone, binary alloy current collectors must be assessed for metastable ternary phase formation under different cycling conditions to either stabilize and exploit such phases or electrochemically fully strip them. • Mechanically polished CuZn current collector formed thin nanocrystalline layer. • Stable Cu 3 ZnLi 2 ternary Laves phase observed after 100 cycles in Li-metal half cell. • Initial nanocrystalline layer converted and continued growing into brass. • Phase is retained after electrochemical stripping. • Ternary phase formation effects capacity retention.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Extraction and Separation Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (79)
Show source-provided references
1. Mechanism and solutions of lithium dendrite growth in lithium metal batteries10.1039/D3QM01151H ↗
2. Review—challenges and opportunities in lithium metal battery technology10.1149/1945-7111/ad4ff2 ↗
3. Safety hazards of lithium metal batteries: from the perspective of lithium dendrites and thermal runaway10.1021/acs.energyfuels.5c00728 ↗
4. Unraveling charge effects on interface reactions and dendrite growth in lithium metal anode10.1038/s41524-025-01615-4 ↗
5. Visualizing diverse lithium growth and stripping behaviors in anode-free solid-state batteries with operando X-ray
6. Recent progress on multifunctional electrolyte additives for high‐energy‐density Li batteries – a review10.1002/celc.202300702 ↗
7. Additive engineering strategies for improved interfacial stability in lithium metal batteries10.1039/D4EE02479F ↗
8. Non-aqueous liquid electrolytes in lithium metal battery: components and modification
9. Interfacial solvation-structure regulation for stable Li metal anode by a desolvation coating technique
10. Strategies for lithium metal anodes: crafting protective layers through physical and chemical design10.1016/j.jpowsour.2024.236154 ↗
11. The influence of pressure on lithium dealloying in solid-state and liquid electrolyte batteries10.1038/s41563-025-02198-7 ↗
12. Recent progress in liquid electrolytes for high‐energy lithium–metal batteries: from molecular engineering to applications
13. Sustaining surface lithiophilicity of ultrathin Li-Alloy coating layers on current collector for zero-excess Li-Metal batteries
14. Zn-Sn interdigitated eutectic alloy anodes with high volumetric capacity for lithium-ion batteries10.1016/j.joule.2019.01.005 ↗
15. Li–Bi and Li–In alloys-based composite anode for lithium metal batteries10.1016/j.jallcom.2023.171619 ↗
16. 3D current collectors for lithium metal anodes: a review on concepts of performance10.1177/09506608251318467 ↗
17. A review on current collector coating methods for next-generation batteries10.1016/j.cej.2022.136860 ↗
18. Chemical dealloying derived 3D porous current collector for Li metal anodes10.1002/adma.201601409 ↗
19. Electrochemically dealloyed 3D porous copper nanostructure as anode current collector of Li-Metal batteries10.1002/smll.202301731 ↗
20. Nanograined copper foil as a high-performance collector for lithium-ion batteries10.1016/j.jallcom.2020.154801 ↗
21. Intrinsic zinc in brass enables lithium anode dendrite‐free
22. Lithiophilic 3D porous CuZn current collector for stable lithium metal batteries10.1021/acsenergylett.9b01987 ↗
23. 3D lithiophilic–lithiophobic–lithiophilic dual-gradient porous skeleton for highly stable lithium metal anode10.1039/C9TA09505E ↗
24. Lithiophilic ZnCu alloy sites on copper current collector for high performance Li metal anode10.1016/j.electacta.2024.144294 ↗
25. Preparation and performance of a three-dimensional porous copper-tin electrode for lithium-ion batteries10.1016/j.jallcom.2023.172239 ↗
26. General fabrication of robust alloyed metal anodes for high-performance metal batteries10.1002/adma.202404689 ↗
27. Grain boundaries control lithiation of solid solution substrates in lithium metal batteries
28. Electrochemical behavior of elemental alloy anodes in solid-state batteries10.1021/acsenergylett.4c00915 ↗
29. Structural evolution during lithiation cycles of the Li-Au system observed by in-Situ high-energy x-Ray diffraction10.1149/MA2015-02/1/40 ↗
30. Solid-solution or intermetallic compounds: phase dependence of the Li-Alloying reactions for Li-Metal batteries
31. Improved plating/stripping in anode-free lithium metal batteries through electrodeposition of lithiophilic zinc thin films10.1016/j.electacta.2024.144190 ↗
32. Lithium-rich alloy as stable lithium metal composite anode for lithium batteries10.1016/j.esci.2024.100266 ↗
33. Mechanical rolling formation of interpenetrated lithium metal/lithium tin alloy foil for ultrahigh-rate battery anode10.1038/s41467-020-14550-3 ↗
34. In-situ construction of lithium-tin alloy skeleton as a lithiophilic host for lithium metal anode10.1016/j.electacta.2023.143504 ↗
35. Electrochemical solid-state amorphization in the immiscible Cu-Li system10.1016/j.scib.2018.06.021 ↗
36. Highly lithiophilic and structurally stable Cu-Zn alloy skeleton for high-performance Li-rich ternary anodes10.1016/j.jcis.2023.08.058 ↗
37. Enhancing the electrochemical stability of lithium anode by introducing lithiophilic three-dimensional framework Li2Cu3Zn10.1016/j.jallcom.2022.166437 ↗
38. Li(2)ZnCu(3) modified Cu current collector to regulate Li deposition
39. Hierarchical Li electrochemistry using alloy-type anode for high-energy-density Li metal batteries10.1038/s41467-024-45613-4 ↗
40. In situ formed 3D hybrid framework of lithiophilic Li(2)Cu(3)Zn modified Li(x)Cu alloy nanowires towards a dendrite-free Li metal anode10.1039/D5CC00285K ↗
41. Unraveling the origin of lithiophilicity toward a molten Li metal: zn metal as Trojan horse10.1021/acsaem.3c00179 ↗
42. Quantifying capacity loss mechanisms of Li metal anodes beyond inactive Li010.1149/MA2023-012630mtgabs ↗
43. Deciphering the impact of the active lithium reservoir in anode-free pouch cells10.1149/MA2024-027889mtgabs ↗
44. SEI/dead Li-turning capacity loss for high-performance anode-free solid-state lithium batteries10.1016/j.jechem.2024.04.033 ↗
45. Data on the theoretical X-Ray attenuation and transmissions for lithium-ion battery cathodes10.1016/j.dib.2020.105539 ↗
46. The lattice parameter of α-bronzes as a function of solute content: application to archaeological materials10.1016/j.msea.2004.10.001 ↗
47. The Laplace project: an integrated suite for correlative atom probe tomography and electron microscopy under cryogenic and UHV conditions10.1371/journal.pone.0209211 ↗
48. Laser-equipped gas reaction chamber for probing environmentally sensitive materials at near atomic scale10.1371/journal.pone.0262543 ↗
49. A model accounting for spatial overlaps in 3D atom-probe microscopy10.1016/S0304-3991(01)00120-6 ↗
50. Detection limits in XPS for more than 6000 binary systems using Al and Mg Kα X-rays10.1002/sia.5406 ↗
51. Practical guides for x-ray photoelectron spectroscopy: use of argon ion beams for sputter depth profiling and cleaning10.1116/6.0003681 ↗
52. Degradation and speciation of Li salts during XPS analysis for battery research10.1021/acsenergylett.2c01587 ↗
53. Accommodating lithium into 3D current collectors with a submicron skeleton towards long-life lithium metal anodes10.1038/ncomms9058 ↗
54. Rational engineering of anode current collector for dendrite-free lithium deposition: strategy, application, and perspective
55. Constructing three-dimensional architectures to design advanced copper-based current collector materials for alkali metal batteries: from nanoscale to microscale10.3390/molecules29153669 ↗
56. Recent developments in current collectors for lithium metal anodes10.1039/D3QM00029J ↗
57. Lithium diffusion in copper10.1021/acs.jpclett.9b02014 ↗
58. Characterisation of lithium-ion battery anodes fabricated via in-situ Cu6Sn5 growth on a copper current collector10.1016/j.jpowsour.2019.01.034 ↗
59. Evidence of copper separation in lithiated Cu6Sn5 lithium-ion battery anodes10.1021/acsaem.9b02014 ↗
60. Diffusion in ordered and disordered copper-zinc10.1103/PhysRev.104.1536 ↗
61. Internal friction and diffusion in 31% alpha brass10.1016/0001-6160(57)90153-0 ↗
62. Diffusion and correlation effects in copper-zinc alloys10.1103/PhysRevB.2.1540 ↗
63. Review article: stress in thin films and coatings: current status, challenges, and prospects10.1116/1.5011790 ↗
64. Interfacial diffusion and Kirkendall voids evolution in the Copper-Zinc alloy binary interface revealed by in situ transmission electron microscopy10.1016/j.jallcom.2023.172018 ↗
65. Grain-boundary diffusion of zinc in copper measured by the electron-probe microanalyzer10.1063/1.1735063 ↗
66. Correspondence between hydrogen enhancing dezincification layer-induced stress and susceptibility to SCC of brass10.1016/S0921-5093(03)00322-8 ↗
67. Stress corrosion cracking relation with dezincification layer-induced stress10.1007/s11661-001-0221-8 ↗
68. Effect of brass composition and phases on stress corrosion mitigation by laser shock peening10.1016/j.mfglet.2019.11.003 ↗
69. Clarification of the mechanism of the dealloying phenomenon10.5006/0010-9312-24.2.38 ↗
70. Diffusion of zinc in alpha brass
71. Rates of diffusion of copper and zinc in alpha brass
72. F.U. Renner, A. Stierle, H. Dosch, D.M. Kolb, T.L. Lee, J. Zegenhagen, In situ x-ray diffraction study of the initial dealloying and passivation of ${\text{Cu}}3\text{Au}(111)$ during anodic dissolution, Phys. Rev. B 77 (6 AD) 235433. https://doi.org/10.1103/PhysRevB.77.235433.10.1103/PhysRevB.77.235433 ↗
73. Vacuum dealloyed brass as Li-Metal battery current collector: effect of zinc and porosity
74. Automated nanocrystal orientation and phase mapping in the transmission electron microscope on the basis of precession electron diffraction10.1524/zkri.2010.1205 ↗
75. Correction: rauch et al. New Features in Crystal Orientation and Phase Mapping for Transmission Electron Microscopy10.3390/sym13091675 ↗
76. Evaluation of EELS spectrum imaging data by spectral components and factors from multivariate analysis10.1093/jmicro/dfx091 ↗
77. Facilitating the systematic nanoscale study of battery materials by Atom Probe tomography through in‐situ metal coating
78. A versatile and reproducible cryo-sample preparation methodology for Atom Probe studies
79. Combining structural and chemical information at the nanometer scale by correlative transmission electron microscopy and atom probe tomography10.1016/j.ultramic.2015.02.003 ↗