journal article·2026-06Open access

Enhancement of reversible solid oxide cell stack design and operation via thermal systems analogs

Hari Bharadwaj Narayanan, Comas Haynes

Abstract

Reversible solid oxide cell (RSOC) stacks can approach ultra-high stack efficiencies (>70%) and reduce voltage swings by operating at low current densities with high reactant utilizations. However, such conditions may lead to excessively low electrochemical driving forces, particularly in conventional single-stage stacks that lack operational flexibility. A novel pathway to address these limitations lies in drawing analogies from thermal systems, including the mapping of thermal system analyses onto electrochemical systems. Of particular interest are the concepts of multi-staging and pinch points. Multi-physics MATLAB models were developed to simulate multi-stage configurations under varying operating conditions. Results show that multi-staging significantly improves the practicality of achieving high stack efficiencies while mitigating voltage swings, especially at low current densities. At 0.1 A/cm 2 , the multi-stage configuration achieved a round-trip stack voltage efficiency (RTSVE) of 87%, an absolute improvement of 6.5 percentage points, while reducing the voltage swing by more than 30% relative to a conventional single-stage configuration. Electrochemical pinch-point analysis further indicates improved feasibility despite the higher stack efficiencies achieved through multi-staging. These results demonstrate that thermal system analogs offer a viable pathway toward high-efficiency, durable RSOC operation. • Thermal system analogs: A complementary approach to enhance RSOC operation. • Multi-staging with flow reversal improves efficiency and lowers voltage swing. • Electrochemical pinch points proposed as a novel diagnostic for RSOC feasibility. • Multi-staged RSOCs achieved RTSVEs up to 87% at 0.1 A/cm 2 , 6.5 pp above baseline.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Semiconductor materials and devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (64)

Show source-provided references
1. Reversible solid-oxide cells for clean and sustainable energy10.1093/ce/zkz023 ↗
2. Challenges in the development of reversible solid oxide cell technologies: a mini review10.1002/apj.1987 ↗
3. A theoretical study on reversible solid oxide cells as key enablers of cyclic conversion between electrical energy and fuel10.3390/en14154517 ↗
4. Mahcene · 2006
5. Potential of reversible solid oxide cells as electricity storage system10.3390/en9080662 ↗
6. Optimization and durability of reversible solid oxide cells10.1149/09101.2631ecst ↗
7. Degradation mechanism and modeling study on reversible solid oxide cell in dual-mode—A review10.1016/j.ijhydene.2022.08.240 ↗
8. Advancing fuel cells technology via analogous heat exchanger design principles
9. Modelling and computation for designs of multistage heat exchanger systems10.1016/0895-7177(90)90298-2 ↗
10. Allocation optimization of two-stage compression-absorption heat exchanger10.1016/j.ijheatfluidflow.2024.109396 ↗
11. A two-stage vertical absorption heat exchanger for district heating system10.1016/j.ijrefrig.2020.02.002 ↗
12. Efficiency enhancement in fuel cells: multistage oxidation concept10.1149/1.1838015 ↗
13. Increased irreversibility caused by composition changes in fuel cells10.1016/0013-7480(69)90104-1 ↗
14. Hirchenhofer · 2004
15. Thermochemical production of hydrogen via multistage water splitting processes10.1016/0360-3199(76)90007-0 ↗
16. Aulakh · 2019
17. Progress in the planar CPn SOFC system design10.1016/S0378-7753(96)02350-6 ↗
18. Development of SOFC stacks at ceramic fuel cells limited10.1149/1.3205516 ↗
19. Examination of a high-efficiency solid oxide fuel cell system that reuses exhaust gas10.1016/j.applthermaleng.2016.10.096 ↗
20. Effect of proton-conduction in electrolyte on electric efficiency of multi-stage solid oxide fuel cells10.1038/srep12640 ↗
21. Numerical analysis for high efficiency internally reverse SOFC10.1252/kakoronbunshu.37.447 ↗
22. Improvement of cadmium ion electrochemical removal from dilute aqueous solutions by application of multi-stage electrolysis10.1007/s13762-014-0579-y ↗
23. Rooker · 2003
24. Setlock · 2016
25. Improved performance of reversible solid oxide cells with Ba0. 9Co0. 2Fe0. 7Nb0. 1F0. 1O2. 9− δ semiconductor: synthesis, characterization, and performance evaluation10.1021/acs.iecr.4c00957 ↗
26. Enhancing electrochemical performance of reversible solid oxide cells with double element-deficient Pr0. 97Ba0. 97Co1. 5Fe0. 5O5+ δ oxygen electrodes10.1021/acs.energyfuels.4c03955 ↗
27. Boosting solid oxide fuel cell performance via electrolyte thickness reduction and cathode infiltration10.1039/D0TA04280C ↗
28. Current developments in reversible solid oxide fuel cells10.1016/j.rser.2016.03.005 ↗
29. Simultaneously improved reversibility and hydrogen production of solid oxide cells through infiltrating air electrode10.1039/D4TA07083F ↗
30. High performance LaNi1-xCoxO3-δ (x= 0.4 to 0.7) infiltrated oxygen electrodes for reversible solid oxide cells10.1016/j.jpowsour.2017.03.148 ↗
31. Thermal management of reversible solid oxide cells in the dynamic mode switching10.1016/j.apenergy.2022.120383 ↗
32. Sustained long-term efficiency in solid oxide electrolysis systems through innovative reversible electrochemical heat management10.1016/j.enconman.2024.118405 ↗
33. Arias · 2019
34. Modelling of solid oxide steam electrolyser: impact of the operating conditions on hydrogen production10.1016/j.jpowsour.2010.09.054 ↗
35. A real-time spatial SOFC model for hardware-based simulation of hybrid systems
36. Accurate predictions of H2O and CO2 co-electrolysis outlet compositions in operation10.1016/j.ijhydene.2015.01.031 ↗
37. Influence of pressure on solid oxide electrolysis cells investigated by experimental and modeling approach10.1016/j.ijhydene.2015.07.099 ↗
38. Effects of pressure on high temperature steam and carbon dioxide Co-electrolysis10.1016/j.electacta.2017.09.037 ↗
39. Low-cost manufacturing of high temperature electrolysis stacks [powerPoint presentation]
40. Thermal gradient management in solid oxide fuel cells: mechanisms, strategies, and future directions10.1016/j.jpowsour.2025.238017 ↗
41. Vaeth, A., & Braun, R. (n.d.). Progress on Reversible Solid Oxide Cell Stack and System Technologies [Presentation]. Nexceris LLC; National Energy Technology Laboratory (NETL).
42. Moran · 2010
43. Thermodynamics: an engineering approach
44. Thermal constraint control of reversible solid oxide cell for optimal system efficiency10.1016/j.ijhydene.2025.04.474 ↗
45. Novel electrical energy storage system based on reversible solid oxide cells: system design and operating conditions10.1016/j.jpowsour.2014.10.205 ↗
46. Experimental results of a 10/40 kW-class reversible solid oxide cell demonstration system at forschungszentrum jülich10.1149/1945-7111/accbf0 ↗
47. Efficiency analysis of a novel reversible solid oxide cell system with the secondary utilization of the stack off-gas: a model-based study10.1016/j.jclepro.2023.136570 ↗
48. Oxidation-induced degradation and performance fluctuation of solid oxide fuel cell Ni anodes under simulated high fuel utilization conditions10.1016/j.ijhydene.2019.02.136 ↗
49. SOFC stack performance under high fuel utilization10.1016/j.ijhydene.2014.11.094 ↗
50. Development of test protocols for solid oxide electrolysis cells operated under accelerated degradation conditions10.1016/j.jpowsour.2021.229875 ↗
51. An experimental investigation of fuel assisted electrolysis as a function of fuel and reactant utilization10.1016/j.ijhydene.2016.05.205 ↗
52. Novel SOFC system concept with anode off-gas dual recirculation: a pathway to zero carbon emission and high energy efficiency10.1016/j.apenergy.2024.122862 ↗
53. High efficiency reversible solid oxide system
54. Polarization analysis of solid oxide electrolysis cells under varying operating conditions10.1016/j.jpowsour.2025.239061 ↗
55. A complete polarization model of a solid oxide fuel cell and its sensitivity to the change of cell component thickness10.1016/S0378-7753(00)00556-5 ↗
56. Electrochemical characteristics of fuel electrodes in solid oxide electrolysis cells at low steam concentration
57. Herring · 2003
58. Oxidation of nickel in solid oxide cells during electrochemical operation: experimental evidence, theoretical analysis, and an alternative hypothesis on the nickel migration10.1016/j.jpowsour.2023.232991 ↗
59. Kothandaraman · 2004
60. Nellis · 2008
61. Dynamic modeling and parameter analysis study on reversible solid oxide cells during mode switching transient processes10.1016/j.apenergy.2020.114601 ↗
62. UA and pinch point temperature difference modeling—Finding the best heat exchanger schemes10.1016/j.compchemeng.2022.108085 ↗
63. Heat exchanger network design of an organic Rankine cycle integrated waste heat recovery system of a marine vessel using pinch point analysis10.1002/er.5212 ↗
64. High efficiency reversible solid oxide system