Stainless steel based anode porous transport layers for PEM water electrolysis
Source abstract
Abstract
The energy system and the chemical industry of the present and future require large quantities of hydrogen. A key technology for the production of green hydrogen is the polymer electrolyte membrane water electrolysis (PEMWE). However, investment costs are high due to the use of iridium, platinum and titanium. One way to reduce costs is to partially replace titanium used for the porous transport layers (PTL) by stainless steel. Therefore, we used 316L expanded metals and coated them with titanium by cold gas spraying (CGS) for corrosion protection. Thereby, the average layer thickness was reduced from 60±12 µm to 48±16 µm to 33±16 µm. The corrosion stability of the expanded metals was evaluated by long-term measurements for up to 1006 h at 2.0 V, impedance spectroscopy, analyzing water samples and performing post mortem analysis of cross-sections of the membrane electrode assemblies (MEAs). With 48 µm and 33 µm thick coatings, cationic contamination caused by corrosion lead to increasing ohmic resistances and catalyst inactivation. In contrast, with thicker protective coatings of 60 µm, PEMWE operation was conducted for 1006 h at 2.8 A cm -2 without any evidence of corrosion impact and with performance close to state-of-the-art PTLs. With this newly developed PTL, around 58% Ti-savings can be achieved compared to full titanium PTLs. • 316L-based PTLs with performance close to full titanium PTLs. • 2.8 A cm -2 at 2 V with 316L expanded metal PTL with Ti cold gas spray coated coating. • 60±12 µm protective Ti-coating enabled stable PEMWE operation for 1006 h. • 58% Titanium saved compared to full titanium PTLs.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Hybrid Renewable Energy Systems · Fuel Cells and Related Materials · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. A green hydrogen economy for a renewable energy society10.1016/j.coche.2021.100701 ↗
2. Hydrogen production via steam reforming: A critical analysis of MR and RMM technologies10.3390/membranes10010010 ↗
3. Dynamic operation of proton exchange membrane electrolyzers—Critical review10.1016/j.rser.2023.113883 ↗
4. Methods identifying cost reduction potential for water electrolysis systems10.1016/j.coche.2021.100714 ↗
5. Langemann · 2015 · vol. 40
6. Langemann · 2016
7. Coated stainless steels evaluation for bipolar plates in PEM water electrolysis conditions10.1016/j.ijhydene.2021.03.100 ↗
8. Performance losses and current-driven recovery from cation contaminants in PEM water electrolysis10.1149/1945-7111/ad576b ↗
9. Coated stainless steel bipolar plates for proton exchange membrane electrolyzers10.1149/2.0141611jes ↗
10. Electrochemical investigation of stainless steel corrosion in a proton exchange membrane electrolyzer cell10.1016/j.ijhydene.2015.07.061 ↗
11. Powder metallurgical production of 316l stainless steel/niobium composites for proton exchange membrane electrolysis cells10.1080/00325899.2019.1607461 ↗
12. A high-performance, durable and low-cost proton exchange membrane electrolyser with stainless steel components10.1039/D1EE02112E ↗
13. Cold gas spraying of titanium on stainless steel to enhance corrosion protection inside proton exchange membrane water electrolyzers10.1016/j.surfcoat.2025.132486 ↗
14. Stable reference electrode in polymer electrolyte membrane electrolyser for three-electrode measurements10.1149/2.0461916jes ↗
15. Application and analysis of a salt bridge reference electrode setup for PEM water electrolysis: Towards an extended voltage loss break down10.1149/1945-7111/ac9ee1 ↗
16. A review on understanding and identifying degradation mechanisms in PEM water electrolysis cells: Insights for stack application, development, and research10.1016/j.ijhydene.2024.04.017 ↗
17. Bram · 2021
18. Rakousky · 2016
19. Performance data extraction from dynamic long-term operation of proton exchange membrane and alkaline water electrolysis cells10.1016/j.ijhydene.2025.03.387 ↗
20. TiNb alloy coatings for anode PTLs in PEM water electrolyzers10.1016/j.jpowsour.2025.238944 ↗
21. Cold spraying of titanium: A review of bonding mechanisms, microstructure and properties10.4028/www.scientific.net/KEM.533.53 ↗
22. Experimental and numerical investigations of titanium deposition for cold spray additive manufacturing as a function of standoff distance10.3390/ma14195492 ↗
23. Liu · 2021
24. Introducing titanium hydride on porous transport layer for more energy efficient water electrolysis with proton exchange membrane10.1016/j.jpowsour.2023.232913 ↗
25. Sievert · 2025
26. Statistical investigations of basis weight and thickness distribution of continuously produced fuel cell electrodes10.1016/j.jpowsour.2013.05.073 ↗
27. Protective coatings on stainless steel bipolar plates for proton exchange membrane (PEM) electrolysers10.1016/j.jpowsour.2015.12.071 ↗
28. Assessing potential profiles in water electrolysers to minimise titanium use10.1039/D2EE00876A ↗
29. Polymer electrolyte membrane water electrolysis: Restraining degradation in the presence of fluctuating power10.1016/j.jpowsour.2016.11.118 ↗
30. Developing titanium micro/nano porous layers on planar thin/tunable LGDLs for high-efficiency hydrogen production10.1016/j.ijhydene.2018.05.139 ↗
31. Performance improvement of proton exchange membrane electrolyzer cells by introducing in-plane transport enhancement layers10.1016/j.electacta.2019.05.096 ↗
32. Membrane creep caused by porous transport layer compression in pem water electrolysis and the impact on hydrogen permeation10.1149/1945-7111/adcd00 ↗
33. Full depth profile of passive films on 316l stainless steel based on high resolution HAXPES in combination with ARXPS10.1016/j.apsusc.2012.02.099 ↗
34. Stainless steel corrosion in ultrahigh-purity water: Surface analyses and metal release
35. Correlation between nafion morphology in various dispersion liquids and properties of the cast membranes10.3390/membranes13010013 ↗
36. Polymer electrolyte membrane degradation mechanisms in fuel cells - findings over the past 30 years and comparison with electrolyzers10.1149/1.2214554 ↗
37. Impact of iron and hydrogen peroxide on membrane degradation for polymer electrolyte membrane water electrolysis: Computational and experimental investigation on fluoride emission10.1016/j.jpowsour.2019.02.076 ↗
38. Durability of perfluorinated ionomer membrane against hydrogen peroxide10.1016/j.jpowsour.2005.10.043 ↗
39. Fenton reaction mechanism generating no OH radicals in nafion membrane decomposition10.1038/s41598-020-74646-0 ↗