journal article·2026-06Open access

Probing NMC|graphite batteries with ultrasounds: in operando non-destructive through-thickness diagnostics and SoC estimation

Lorenzo Milano, Federico Lissandrello, Eugenio Gibertini, Luca Magagnin

Abstract

Ultrasonic analysis is emerging as a promising non-destructive technique to monitor Li-ion batteries relying on (de)lithiation-induced variations in the mechanical properties of the active materials at the electrodes. Ultrasonic state of charge (SoC) estimations are usually based on shifts of a single peak of the time of flight (ToF) whose behavior is dominated by the contribution of graphite, while effects from the cathode have never been observed. Here, we retain ToF as a core metric but advance to multi-peak analysis. We demonstrate how pulse-echo tests provide live insights through the thickness of the battery, showing two sets of peaks, whose intensity is coherent with Li content at the anodes and cathodes, respectively. This finding has the potential to allow non-destructive through-thickness diagnostics for local state of health (SoH) evaluations in real time. We provide a demonstration of gas formation between two electrodes, as a first alert in case of battery failure. A frequency domain analysis reveals that the transmitted signal is made of three main waves and the spectral power of two of them is a linear indicator of the charge stored in the battery, even during constant voltage charging. • Pulse-echo ultrasound enables depth-resolved battery diagnostics. • Acoustic impedance variations distinguish anode and cathode dynamics. • Gas formation is detected as early failure alert. • Spectral power of transmitted signals quantitatively tracks the SoC.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Battery Technologies Research · Advanced Battery Materials and Technologies · Electrostatics and Colloid Interactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Energy consumption of personal computing including portable communication devices
2. Current li-ion battery technologies in electric vehicles and opportunities for advancements10.3390/en12061074 ↗
3. Nanomaterials for lithium ion batteries10.1016/S1748-0132(06)70114-1 ↗
4. In situ/operando imaging techniques for next-generation battery analysis10.1021/acsenergylett.4c01098 ↗
5. Operando electrochemical impedance spectroscopy and its application to commercial Li-ion batteries10.1016/j.jpowsour.2022.232005 ↗
6. Probing battery electrochemistry with in operando synchrotron X-Ray imaging techniques10.1002/smtd.201700293 ↗
7. Operando X-ray diffraction characterization for understanding the intrinsic electrochemical mechanism in rechargeable battery materials10.1002/smtd.201700083 ↗
8. Battery monitoring and prognostics optimization techniques: challenges and opportunities10.1016/j.energy.2022.124538 ↗
9. A review of battery energy storage systems and advanced battery management system for different applications: challenges and recommendations10.1016/j.est.2024.111179 ↗
10. Kinsler · 2000
11. Measurement uncertainty evaluation of ultrasonic wall thickness measurement10.1016/j.measurement.2019.01.027 ↗
12. Can carbonation depth be measured in a nondestructive way? high-frequency quantitative ultrasound imaging for cement paste10.1016/j.cemconres.2024.107519 ↗
13. A review of non-destructive testing methods of composite materials10.1016/j.prostr.2016.02.008 ↗
14. Piezoelectric films for high frequency ultrasonic transducers in biomedical applications10.1016/j.pmatsci.2010.09.001 ↗
15. State of charge and state of health estimation using electrochemical acoustic time of flight analysis10.1149/2.1411712jes ↗
16. Estimating state of charge and health of lithium-ion batteries with guided waves using built-in piezoelectric sensors/actuators10.1016/j.jpowsour.2018.02.056 ↗
17. Ultrasonic health monitoring of lithium-ion batteries10.3390/electronics8070751 ↗
18. Electrochemical-acoustic time of flight: in operando correlation of physical dynamics with battery charge and health10.1039/C5EE00111K ↗
19. Examining the cycling behaviour of Li-Ion batteries using ultrasonic time-of-flight measurements10.1016/j.jpowsour.2019.227318 ↗
20. Operando acoustic detection of lithium metal plating in commercial LiCoO2/Graphite pouch cells
21. Measuring effective stiffness of Li-ion batteries: via acoustic signal processing10.1039/D0TA05552B ↗
22. Operando ultrasonic monitoring of lithium-ion battery temperature and behaviour at different cycling rates and under drive cycle conditions10.1149/1945-7111/ac6833 ↗
23. Ultrasonic nondestructive diagnosis of lithium-ion batteries with multiple frequencies10.1016/j.jpowsour.2022.232091 ↗
24. State estimation approach of lithium-ion batteries by simplified ultrasonic time-of-flight measurement10.1109/ACCESS.2019.2955556 ↗
25. Understanding full-cell evolution and non-chemical electrode crosstalk of Li-Ion batteries10.1016/j.joule.2018.03.016 ↗
26. Measurements and modelling of the response of an ultrasonic pulse to a lithium-ion battery as a precursor for state of charge estimation10.1016/j.est.2021.102406 ↗
27. Battery state-of-charge estimation using machine learning analysis of ultrasonic signatures10.1016/j.egyai.2022.100188 ↗
28. Operando acoustic monitoring of SEI formation and long-term cycling in NMC/SiGr composite pouch cells10.1149/1945-7111/ab68d6 ↗
29. Real-time state-of-charge estimation for rechargeable batteries based on in-situ ultrasound-based battery health monitoring and extended Kalman filtering model10.1016/j.apenergy.2024.125161 ↗
30. Lithium concentration dependent elastic properties of battery electrode materials from first principles calculations10.1149/2.0031411jes ↗
31. Quantitative characterisation of the layered structure within lithium-ion batteries using ultrasonic resonance10.1016/j.est.2022.104585 ↗
32. Operando visualisation of lithium plating by ultrasound imaging of battery cells10.1038/s41467-024-54319-6 ↗
33. Ultrasonic phased array imaging of gas evolution in a lithium-ion battery
34. Progress and challenges in ultrasonic technology for state estimation and defect detection of lithium-ion batteries
35. First principles investigation into the interwoven nature of voltage and mechanical properties of the LixNMC-811 cathode10.1016/j.jpowsour.2021.230620 ↗
36. Threefold increase in the young's modulus of graphite negative electrode during lithium intercalation10.1149/1.3327913 ↗
37. Mechanical and structural degradation of LiNi x Mn y Co z O 2 cathode in Li-Ion batteries: an experimental study10.1149/2.1751713jes ↗
38. Structural investigation of Li1-xNi0.5Co0.25Mn0.25O2 by in situ XAS and XRD measurements10.1016/j.electacta.2007.08.045 ↗
39. Ultrasound propagation in lithium-ion battery cell materials: basis for developing monitoring and imaging methods10.1002/ente.202200861 ↗
40. Experimental study on gas production characteristics of electrolyte of lithium-ion battery under pyrolysis conditions10.1016/j.est.2023.109367 ↗
41. Impacts of negative to positive capacities ratios on the performance of next-generation lithium-ion batteries