Copper regulated facet dependent surface behavior promoting single crystal growth of sodium layered cathodes
Source abstract
Abstract
Layered oxide cathodes for sodium-ion batteries are susceptible to structural degradation during cycling, which severely limits their long-term stability. Although single-crystal engineering has been demonstrated to significantly improve structural stability, the underlying growth mechanism remains unclear. In this work, NaNi 0.4 Fe 0.2 Mn 0.4 O 2 was selected as a model system to systematically investigate the role of Cu doping during the growth process. In-situ high-temperature XRD and SEM analyses demonstrate that Cu doping influences crystal-growth kinetics and facet-dependent growth modes, thereby promoting a morphological transition from polycrystalline aggregates to single-crystal-like particle structures. Electrochemical and thermal analyses under Na-deficient conditions demonstrated that the Cu-Ni solid solution formed during sintering, together with the relatively strong Cu-O bonds, serves as structural pinning centers during cycling, mitigating interlayer slab gliding and irreversible structural changes, thereby enhancing both cycling stability and thermal stability. From the perspectives of facet evolution and local structural stabilization, this work provides mechanistic insight into how Cu doping regulates single-crystal-like growth and enhances structural stability, offering new strategies for facet engineering and the rational design of sodium-ion battery cathodes.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Nanomaterials and Printing Technologies · Advancements in Battery Materials · Copper Interconnects and Reliability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. Sodium-ion batteries: present and future10.1039/C6CS00776G ↗
2. Routes to high-performance layered oxide cathodes for sodium-ion batteries10.1039/D3CS00929G ↗
3. Research development on sodium-ion batteries10.1021/cr500192f ↗
4. Layered oxide cathodes promoted by structure modulation technology for sodium‐ion batteries10.1002/adfm.202001334 ↗
5. Review—research progress on layered transition metal oxide cathode materials for sodium ion batteries10.1149/1945-7111/abf9bf ↗
6. Recent progress in layered oxide cathodes for sodium-ion batteries: stability, phase transition and solutions10.1039/D4TA03372H ↗
7. Research progresses in O3-type Ni/Fe/Mn based layered cathode materials for sodium ion batteries10.1007/s43979-023-00053-9 ↗
8. Y. Gan, P. Ping, J. Wang, et al., Comparative analysis of thermal stability and electrochemical performance of NaNi1/3Fe1/3Mn1/3O2 cathode in different electrolytes for sodium ion batteries, J. Power Sources 594 (2024) 234008.10.1016/j.jpowsour.2023.234008 ↗
9. Mechanisms and mitigation strategies of gas generation in sodium-ion batteries10.1007/s40820-025-01697-1 ↗
10. Native lattice strain induced structural earthquake in sodium layered oxide cathodes10.1038/s41467-022-28052-x ↗
11. Oxygen release degradation in li‐ion battery cathode materials: mechanisms and mitigating approaches10.1002/aenm.201900551 ↗
12. Ultrahigh-nickel layered cathode with cycling stability for sustainable lithium-ion batteries10.1038/s41893-024-01402-x ↗
13. Single-crystal P2–Na0.67Mn0.67Ni0.33O2 cathode material with improved cycling stability for sodium-ion batteries10.1021/acsami.3c15348 ↗
14. Effect of the grain arrangements on the thermal stability of polycrystalline nickel-rich lithium-based battery cathodes10.1038/s41467-022-30935-y ↗
15. Single crystal cathode materials for lithium-based batteries: synthesis, scaleup, and manufacturing10.1021/acs.chemrev.5c00485 ↗
16. Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenides10.1107/S0567739476001551 ↗
17. Review—Practical issues and future perspective for Na-Ion batteries10.1149/2.0151514jes ↗
18. Nickel-rich layered cathode materials for automotive lithium-ion batteries: achievements and perspectives10.1021/acsenergylett.6b00594 ↗
19. A reflection on lithium-ion battery cathode chemistry10.1038/s41467-020-15355-0 ↗
20. Tailoring Cu-rich surface spinel phase for high-performance O3-type layered cathode materials for sodium-ion batteries10.1016/j.nanoen.2024.109375 ↗
21. Using high-entropy configuration strategy to design na-ion layered oxide cathodes with superior electrochemical performance and thermal stability10.1021/jacs.2c02353 ↗
22. Entropy and crystal-facet modulation of P2-type layered cathodes for long-lasting sodium-based batteries10.1038/s41467-022-30113-0 ↗
23. High‐entropy layered oxide cathodes for sodium‐ion batteries10.1002/anie.201912171 ↗
24. High-entropy energy materials: challenges and new opportunities10.1039/D1EE00505G ↗
25. Synergy of cations in high entropy oxide lithium ion battery anode10.1038/s41467-023-37034-6 ↗
26. Local cation-ordered superlattice stabilizing Ni-Rich single-crystalline cathodes10.1021/jacs.5c00615 ↗
27. A holistic picture of the phase construction process of O3‐Structured NaNi1/3Mn1/3Fe1/3O2 for sodium‐ion batteries10.1002/adfm.202505824 ↗
28. The growth of crystals and the equilibrium structure of their surfaces10.1098/rsta.1951.0006 ↗
29. First-principles and experimental investigation of the morphology of layer-structured LiNiO2 and LiCoO210.1039/c2jm31145c ↗
30. Understanding epitaxial growth of two-dimensional materials and their homostructures10.1038/s41565-024-01704-3 ↗
31. Tailoring the morphology of LiCoO2 : a first principles study10.1021/cm9008943 ↗
32. Research progress of large size SiC single crystal materials and devices10.1038/s41377-022-01037-7 ↗
33. Nucleation theory and the early stages of thin film growth10.1116/1.1600454 ↗
34. Manganese segregation in layered oxide cathode by deep eutectic solvent synthesis toward high-voltage sodium storage10.1021/acsnano.5c14326 ↗
35. Facet-dependent rock-salt reconstruction on the surface of layered oxide cathodes10.1021/acs.chemmater.7b03901 ↗
36. Atomistic simulation informs interface engineering of nanoscale LiCoO210.1021/acs.chemmater.2c01246 ↗
37. Jahn–teller distortions in transition metal compounds, and their importance in functional molecular and inorganic materials10.1039/C2CS35253B ↗
38. Alleviating oxygen evolution from Li-excess oxide materials through theory-guided surface protection10.1038/s41467-018-07080-6 ↗
39. Shape‐controlled synthesis of metal nanocrystals: simple chemistry meets complex physics?10.1002/anie.200802248 ↗
40. Huheey · 2006
41. Reconciling grain growth and shear-coupled grain boundary migration10.1038/s41467-017-01889-3 ↗
42. Nanoparticle assembly and oriented attachment: correlating controlling factors to the resulting structures10.1021/acs.chemrev.2c00700 ↗
43. Magnesium ion-doped layered oxide cathodes for alkali-metal ion batteries: recent research progress and outlook
44. Single-crystal vs polycrystalline cathodes for lithium-ion batteries10.1021/acs.chemrev.5c00441 ↗
45. Effect of Cu substitution in P′2- and P2-Type sodium manganese-based oxides10.1021/acsaem.2c02581 ↗
46. Study on the reversible electrode reaction of Na 1– x Ni0.5 Mn0.5 O2 for a rechargeable sodium-ion battery10.1021/ic300357d ↗
47. Layered oxide cathodes for sodium-ion batteries: storage mechanism, electrochemistry, and techno-economics10.1021/acs.accounts.2c00690 ↗
48. High-energy and long-life O3-type layered cathode material for sodium-ion batteries10.1038/s41467-025-58637-1 ↗
49. An electrochemically neutralized energy-assisted low-cost acid-alkaline electrolyzer for energy-saving electrolysis hydrogen generation10.1039/C7TA10374C ↗
50. High-voltage stabilization of O3-Type layered oxide for sodium-ion batteries by simultaneous tin dual modification10.1021/acs.chemmater.2c00522 ↗
51. Tailoring planar strain for robust structural stability in high-entropy layered sodium oxide cathode materials10.1038/s41560-024-01616-5 ↗
52. Probing the charged state of layered positive electrodes in sodium-ion batteries: reaction pathways, stability and opportunities10.1039/D0TA09553B ↗
53. Cu-Doped P2-Na0.7Mn0.9Cu0.1O2 sodium-ion battery cathode with enhanced electrochemical performance: insight from water sensitivity and surface Mn(II) formation studies10.1021/acsami.0c07244 ↗
54. Guidelines for air-stable lithium/sodium layered oxide cathodes10.1021/acsmaterialslett.1c00827 ↗
55. Charge tuning and anchor effect achieving stable high‐voltage layered metal oxides for sodium‐ion battery10.1002/anie.202500715 ↗
56. Pinning effect enhanced structural stability toward a zero‐strain layered cathode for sodium‐ion batteries10.1002/anie.202100917 ↗
57. Challenges and approaches of single-crystal ni-rich layered cathodes in lithium batteries10.1093/nsr/nwad252 ↗
58. The stability of P2-layered sodium transition metal oxides in ambient atmospheres10.1038/s41467-020-17290-6 ↗
59. Unlocking air stability in defect-free Na-Ion layered oxide cathodes via ultrafast synthesis10.1021/acsenergylett.5c02679 ↗
60. Cu-substitution P2-Na0.66Mn1-Cu O2 sodium-ion cathode with enhanced interlayer stability10.1016/j.jechem.2022.09.010 ↗