Ultrasonic velocity as an improved ultrasound state-of-charge prediction method that compensates for cell thickness change
Source abstract
Abstract
Accurate state-of-charge estimation is critical to the safe and reliable operation of Li-ion batteries. The accuracy of established state-of-charge estimation methods is limited due to measurement drift over many cycles or models which are challenging to reliably parametrise. Ultrasound sensing techniques have the potential to overcome these issues by providing a direct link between the state-of-charge and physical properties of the cell. Ultrasonic time-of-flight is the predominant measurement used to predict state-of-charge, but this measurement is complicated by changes in cell thickness during cycling, the effect of which has gone underappreciated until now. Unlike time-of-flight, ultrasonic velocity is unaffected by cell thickness changes, and this paper demonstrates for the first time the advantages of using velocity to predict state-of-charge. Velocity is found to be more consistent than time-of-flight at a range of different C-rates, temperatures, and across multiple cycles. This culminates in a large improvement in the prediction of state-of-charge during a US06 drive cycle, where the mean difference between predicted and actual state-of-charge is improved from 12.3 % to 3.8 % when velocity is used instead of time-of-flight. These results are a significant step towards the realisation of state-of-charge prediction using ultrasound and hence safer and more reliable Li-ion battery operation. • Compensating for cell thickness reduces the charge–discharge hysteresis gap by 60 %. • The difference between measurements at 0.2 and 1 C is halved. • The effect of ambient temperature is reduced from 15 % to 8 % SoC per 1 °C. • Measurement drift from aging-related irreversible cell expansion is reduced by 71 %. • During a drive cycle, predicted and actual SoC difference is reduced by 69 %.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Battery Technologies Research · Advancements in Battery Materials · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Evaluation of lithium-ion battery equivalent circuit models for state of charge estimation by an experimental approach10.3390/en4040582 ↗
2. A systematic model-based degradation behavior recognition and health monitoring method for lithium-ion batteries10.1016/j.apenergy.2017.05.124 ↗
3. Extended Kalman filtering for battery management systems of LiPB-based HEV battery packs - part 2. Modeling and identification10.1016/j.jpowsour.2004.02.032 ↗
4. An improved parameter identification and radial basis correction-differential support vector machine strategies for state-of-charge estimation of urban-transportation-electric-vehicle lithium-ion batteries10.1016/j.est.2023.110222 ↗
5. Improved singular filtering-Gaussian process regression-long short-term memory model for whole-life-cycle remaining capacity estimation of lithium-ion batteries adaptive to fast aging and multi-current variations10.1016/j.energy.2023.128677 ↗
6. Electrochemical-acoustic time of flight: In operando correlation of physical dynamics with battery charge and health10.1039/C5EE00111K ↗
7. State of charge and state of health estimation using electrochemical acoustic time of flight analysis10.1149/2.1411712jes ↗
8. Probing lithium-ion batteries’ state-of-charge using ultrasonic transmission – concept and laboratory testing10.1016/j.jpowsour.2017.01.090 ↗
9. Precise state-of-charge mapping via deep learning on ultrasonic transmission signals for lithium-ion batteries10.1021/acsami.2c22210 ↗
10. Methods for quantifying expansion in lithium-ion battery cells resulting from cycling: A review
11. Operando ultrasonic monitoring of lithium-ion battery temperature and behaviour at different cycling rates and under drive cycle conditions10.1149/1945-7111/ac6833 ↗
12. Ultrasonic monitoring of lithium-ion batteries with in-situ self-temperature correction10.1016/j.jpowsour.2024.234103 ↗
13. Ultrasonic nondestructive diagnosis of lithium-ion batteries with multiple frequencies10.1016/j.jpowsour.2022.232091 ↗
14. State estimation approach of lithium-ion batteries by simplified ultrasonic time-of-flight measurement10.1109/ACCESS.2019.2955556 ↗
15. Temperature compensation in ultrasonic monitoring of lithium-ion batteries for accurate state of charge and ageing assessment
16. Dynamic ultrasonic response modeling and accurate state of charge estimation for lithium ion batteries under various load profiles and temperatures10.1016/j.apenergy.2023.122210 ↗
17. Advances in acoustic techniques for evaluating defects and properties in lithium-ion batteries: A review
18. Ultrasonic health monitoring of lithium-ion batteries
19. Effect of external pressure and internal stress on battery performance and lifespan
20. Goods · 2003
21. Welding stresses and strains10.1533/9780857097576.72 ↗
22. Polymer thermal and acoustic properties using heterodyne detected transient grating technique10.1002/polb.22233 ↗
23. Volume changes of graphite anodes revisited: A combined operando X-ray diffraction and in situ pressure analysis study10.1021/acs.jpcc.8b01873 ↗
24. Hysteresis and current dependence of the thickness change of lithium-ion cells with graphite anode10.1016/j.est.2017.04.006 ↗
25. Voltage hysteresis during lithiation/delithiation of graphite associated with meta-stable carbon stackings10.1039/D0TA10403E ↗
26. Phase evolution and intermittent disorder in electrochemically lithiated graphite determined using in operando neutron diffraction10.1021/acs.chemmater.9b05145 ↗
27. Experimental characterization of lithium-ion cell strain using laser sensors10.3390/en14196281 ↗