journal article·2026-05Open access

A study of a commercially available anode-supported 2R-Cell™ SOFC via synchrotron radiation XAFS and electrochemical characterization

Gabriel A. Cabrera-Pasca, Beethoven Narváez-Romo, Erick L. Ribeiro, Latif U. Khan, Matheus B.C. de Souza, Pedro H. Britto-Costa, Raphaël Ihringer, Santiago J.A. Figueroa, Tiago M.T. Martins, Zahid U. Khan, Izabel F. Machado, Julio R. Meneghini, Nigel P. Brandon, Thiago Lopes

Abstract

Solid oxide fuel cells (SOFCs) represent a promising pathway toward efficient and low-emission energy conversion technologies. This study investigates the integrated electrochemical and synchrotron-based characterization of a commercially manufactured anode-supported SOFC evaluated at laboratory (button-cell) scale (2R-Cell™), developed by Fiaxell SOFC Technologies. Microstructural analysis was conducted using scanning electron microscopy (SEM) combined with energy-dispersive X-ray spectroscopy (EDS). This assessment enabled direct observation of the engineered anode composed of Ni–8YSZ microspheres forming low-tortuosity channels, as well as a dense 8YSZ electrolyte stabilized by a GDC buffer layer. Synchrotron-based X-ray fluorescence (XRF) mapping confirmed the preservation of multilayer chemical integrity after operation under reducing conditions. X-ray absorption spectroscopy (XAS), including XANES and EXAFS, was employed at the Ni, Zr, Fe, and Sr K-edges to monitor redox behavior and structural evolution. The Ni spectra revealed partial and spatially heterogeneous reductions NiO to Ni 0 at 800 °C, while the Zr and Fe spectra showed negligible changes, indicating stability of the electrolyte and cathode. Electrochemical impedance spectroscopy (EIS) under H 2 /N 2 operation further validated the low polarization resistance and robust performance of the cell architecture. These results demonstrate the electrochemical resilience and microstructural integrity of the 2R-Cell™, highlighting its suitability for advanced hydrogen-fueled SOFC applications. • Operando structural and electrochemical analysis of a commercial SOFC at button-cell scale. • Synchrotron XAFS reveals heterogeneous and partial NiO-to-Ni reduction at 800 °C. • Electrolyte and cathode remain structurally stable under H 2 operation. • Engineered anode microstructure preserved after initial reduction.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · CO2 Reduction Techniques and Catalysts · Fuel Cells and Related Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (61)

Show source-provided references
1. International Energy Agency - IEA, Global Energy Review (2025). pp. 5,31https:https://www.iea.org/reports/global-energy-review-2025 2025.
2. Fuel cell hybrid powertrains for use in southern Italian railways10.1016/j.ijhydene.2019.09.005 ↗
3. Recent advances in the catalysts for hydrogen production via ethanol steam reforming10.1002/cctc.202401866 ↗
4. Design and performance of a compact air-breathing jet hybrid-electric engine coupled with solid oxide fuel cells10.3389/fenrg.2020.613205 ↗
5. Analysis and design for hydrogen-fueled cascade solid oxide fuel cell system10.1016/j.enconman.2024.118433 ↗
6. A comprehensive review of solid oxide fuel cells operating on various promising alternative fuels10.1016/j.enconman.2021.115175 ↗
7. Experimental characterization of solid oxide fuel cell hydrogen fueled in a residential small villa10.1016/j.ijhydene.2025.01.166 ↗
8. Effect of nano-Al2O3 addition on mechanical durability of nickel-yttria stabilized zirconia anode support of solid oxide fuel cells10.1016/j.ceramint.2018.05.114 ↗
9. Highly durable nano-oxide dispersed ferritic stainless steel interconnects for intermediate temperature solid oxide fuel cells10.1016/j.jpowsour.2019.227109 ↗
10. Experimental investigation on sulfur transformation during coal steam gasification with Ca-based absorbent10.1016/j.fuel.2023.127908 ↗
11. Shape control of ceria catalytic supports for enhanced ethanol reforming in solid oxide fuel cells10.1021/acsaem.3c02757 ↗
12. A review of proton-conducting electrolytes for efficient low-temperature solid oxide fuel cells: progress, challenges, and perspectives10.1021/acs.energyfuels.4c03683 ↗
13. Electrical conductivity of thick film YSZ10.1016/j.ssi.2006.07.039 ↗
14. Ohmic resistance of thin yttria stabilized zirconia film and electrode-electrolyte contact area10.1016/S0921-5107(01)00515-3 ↗
15. Kenjo, T. & Nakagawa, T. Ohmic Resistance of the Electrode-Electrolyte Interface in AuIYSZ Oxygen Electrodes..
16. Electronic and structural properties of La0.4Sr0.6Ti1−yCoyO3±δ electrode materials for symmetric SOFC studied by hard X-ray absorption spectroscopy10.1016/j.ijhydene.2013.05.005 ↗
17. High temperature X-ray absorption spectroscopy of the local electronic structure and oxide vacancy Formation in the Sr2Fe1.5Mo0.5O6−δ solid oxide fuel cell anode catalyst10.1021/acsaem.8b01579 ↗
18. Crystal structure, cobalt and iron speciation and oxygen non-stoichiometry of La0.6Sr0.4Co1-yFeyO3-δ nanorods for IT-SOFC cathodes10.1016/j.jallcom.2019.153250 ↗
19. Innovative advances and challenges in solid oxide electrolysis cells: exploring surface segregation dynamics in perovskite electrodes10.1016/j.mser.2024.100864 ↗
20. Development of an advanced flexible solid oxide fuel cell stack concept10.1149/07801.1815ecst ↗
21. Coupled degradation mechanism of electrochemical and mechanical performance of solid oxide fuel cells under thermal cycling10.1016/j.apenergy.2024.125187 ↗
22. 2R-Cell: a universal cell for an easy and safe SOFC operation10.1149/1.3570014 ↗
23. GDC buffer layer synthesized by reactive magnetron sputtering: effect of total pressure and thickness on SOFC performances10.3390/cryst10090759 ↗
24. Raman spectroscopy during catalytic operations with on-line activity measurement (operando spectroscopy): a method for understanding the active centres of cations supported on porous materials10.1039/B204494C ↗
25. Emergence of the first XAFS/XRF beamline in the Middle East: providing studies of elements and their atomic/electronic structure in pluridisciplinary research fields10.1107/S1600577522005215 ↗
26. Influence of the discretization methods on the distribution of relaxation times deconvolution: implementing radial basis functions with DRTtools10.1016/j.electacta.2015.09.097 ↗
27. Evaluation and modeling of the cell resistance in anode-supported solid oxide fuel cells10.1149/1.2801372 ↗
28. Microstructure and long-term stability of Ni-YSZ anode supported fuel cells: a review10.1088/2752-5724/ac88e7 ↗
29. Analysing tortuosity for solid oxide fuel cell anode material: experiments and modeling10.1149/1945-7111/acf884 ↗
30. Development of porous metal substrate for thin-film solid oxide fuel cells (TF-SOFCs)10.1021/acsaem.4c02244 ↗
31. Towards high power density metal supported solid oxide fuel cell for Mobile applications10.1149/2.0741802jes ↗
32. A high-strength solid oxide fuel cell supported by an ordered porous cathode membrane10.3390/membranes14020044 ↗
33. The application of hierarchical structures in energy devices: new insights into the design of solid oxide fuel cells with enhanced mass transport10.1039/C8EE01064A ↗
34. Activating and stabilizing the surface of anode for high-performing direct-ammonia solid oxide fuel cells10.1007/s12274-022-4993-z ↗
35. A comprehensive study on effective triple-phase boundary density and its correlation with active anode thickness in solid oxide fuel cells10.1002/ese3.1850 ↗
36. Highly conductive and stable electrolytes for solid oxide electrolysis and fuel cells: fabrication, characterisation, recent progress and challenges
37. Recent advances on electrolyte materials for SOFC: a review10.1016/j.inoche.2023.110724 ↗
38. Controlling cation migration and inter-diffusion across cathode/interlayer/electrolyte interfaces of solid oxide fuel cells: a review10.1016/j.ceramint.2020.11.002 ↗
39. Recent advances in cathode materials for solid oxide fuel cell10.1016/j.ceramint.2025.01.229 ↗
40. In-situ TEM reduction of a solid oxide cell with NiO/YSZ fuel electrode10.1016/j.jpowsour.2024.235626 ↗
41. In situ redox cycle of a nickel-YSZ fuel cell anode in an environmental transmission electron microscope10.1016/j.actamat.2010.04.019 ↗
42. Influences of Ni content and porosity on mechanical properties of Ni–YSZ composites under solid oxide fuel cell operating conditions10.1007/s10853-020-04624-4 ↗
43. Perspective and control of cation interdiffusion and interface reactions in solid oxide fuel cells (SOFCs)10.1016/j.mseb.2023.116415 ↗
44. Microstructural characteristics of SDC electrolyte film supported by Ni–SDC cermet anode10.1149/1.3129436 ↗
45. Effect of nickel diffusion on the microstructure of Gd-doped ceria (GDC) electrolyte film supported by Ni–GDC cermet anode10.1016/j.ssi.2010.03.012 ↗
46. Effects of impurities on microstructure in Ni/YSZ–YSZ half-cells for SOFC10.1016/S0167-2738(03)00271-6 ↗
47. Cellular nickel-Yttria/Zirconia (Ni-YSZ) cermet foams: manufacturing, microstructure and properties10.3390/ma13112437 ↗
48. Strategy to probe the local atomic structure of luminescent rare Earth complexes by X-ray absorption near-edge spectroscopy simulation using a machine learning-based PyFitIt approach10.1021/acs.inorgchem.2c03850 ↗
49. Investigations on low temperature magnetic and magnetoelectric properties of multiferroic-NiO nanocomposites10.1016/j.jallcom.2023.171353 ↗
50. Nickel oxide reduction by hydrogen: Kinetics and structural transformations10.1021/acs.jpcc.5b04313 ↗
51. In situ H2 reduction of Al2O3-Supported Ni- and Mo-Based catalysts10.3390/catal12070755 ↗
52. X-ray absorption spectroscopy under reaction conditions: suitability of different reaction cells for combined catalyst characterization and time-resolved studies10.1039/b403071k ↗
53. Tailoring the microstructure of a solid oxide fuel cell anode support by calcination and milling of YSZ10.1038/srep27359 ↗
54. Dependence of polarization in anode-supported solid oxide fuel cells on various cell parameters10.1016/j.jpowsour.2004.08.057 ↗
55. Cold sintering of anode-supported 8YSZ/NiO-8YSZ bilayers for solid oxide fuel cells10.1021/acsaem.1c02483 ↗
56. Behavior of anode- vs. electrolyte-supported solid oxide fuel cells subjected to sulfur poisoning10.1007/s43207-025-00508-y ↗
57. Generalized distribution of relaxation times analysis for the characterization of impedance spectra10.3390/batteries5030053 ↗
58. Leonide · 2010
59. SOFC modeling and parameter identification by means of impedance spectroscopy10.1149/1.3247567 ↗
60. Combined deconvolution and CNLS fitting approach applied on the impedance response of technical Ni∕8YSZ cermet electrodes10.1149/1.2908860 ↗
61. Electrochemical impedance spectroscopy─a tutorial10.1021/acsmeasuresciau.2c00070 ↗