journal article·2026-05Open access

The effect of fluorine-containing SEI on aging at the anode–separator interface in lithium-ion batteries

Michael Furtmair, Anika Wolters, Sanja Šimić, Günther Ruhl, Michael Sternad

Abstract

Aging processes at the anode–separator contact surface (“interface”) critically affect the lifetime and safety of lithium-ion batteries. Nevertheless, the role of the important fluorine–containing anode passivation layers (“solid electrolyte interphases”, SEI) under application-oriented conditions remains insufficiently understood. In this study, industrial lithium-ion cells with graphite anodes and NMC 811-based cathodes were subjected to long-term cycling and high charging rates. X-ray computed tomography (CT) combined with post-mortem scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX), as well as ion exchange chromatography, Fourier transform infrared spectroscopy (FTIR), and depth-resolved X-ray photoelectron spectroscopy (XPS), was employed to investigate SEI composition as a function of cycling temperature and cycle number. The results demonstrate that cycling temperature has a significantly stronger impact on cell aging than the number of completed cycles. Elevated temperatures promote formation of fluorine containing phases within the SEI, in particular LiF, accompanied by very likely dendrite-induced blocking of electrolyte transport pathways at the anode–separator interface. Furthermore, the fraction of irreversible capacity associated with fluorine–containing SEI-compounds (LiF and Li x PO y F z ) was quantified, revealing a temperature-dependent contribution to interfacial degradation. These findings provide mechanistic insight into temperature-driven SEI evolution and highlight the critical role of LiF in aging processes of industrial lithium-ion batteries. • Cycling temperature has a stronger impact on aging than cycle number. • Elevated temperatures promote formation of fluorine-containing SEI. • Fluorine-containing SEI accumulates at the anode–separator interface. • Fluorine-containing SEI formation correlates with cumulative irreversible capacity rise. • Interfacial fluorine-containing SEI contributes to charge transport limitation and impedance growth.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Historical and prospective lithium-ion battery cost trajectories from a bottom-up production modeling perspective10.1016/j.est.2023.109800 ↗
2. Degradation diagnostics for lithium ion cells10.1016/j.jpowsour.2016.12.011 ↗
3. Tracing the powerfade: location and quantification of the fluoridic solid electrolyte interphase on graphite anodes
4. The electrochemical behavior of alkali and alkaline Earth metals in nonaqueous battery systems - the solid electrolyte interphase model10.1149/1.2128859 ↗
5. Review—SEI: past, present and future10.1149/2.1441707jes ↗
6. An analysis of rechargeable lithium-ion batteries after prolonged cycling
7. Condition monitoring of lithium-ion Batteries for electric and hybrid electric vehicles10.1007/s00502-009-0644-2 ↗
8. Aging of Tesla's 18650 lithium-ion cells: correlating solid-electrolyte-interphase evolution with fading in capacity and power10.1149/2.0171714jes ↗
9. The influence of fluorinated aromatic isocyanates on the cycling performance of silicon anodes in lithium-ion batteries
10. Toward unraveling the origin of lithium fluoride in the solid electrolyte interphase10.1021/acs.chemmater.1c01744 ↗
11. Understanding the role of SEI layer in low-temperature performance of lithium-ion batteries10.1021/acsami.1c23934 ↗
12. Generation and evolution of the solid electrolyte interphase of lithium-ion batteries10.1016/j.joule.2019.08.018 ↗
13. Structural and functional analysis of surface film on Li anode in vinylene carbonate-containing electrolyte10.1149/1.1798411 ↗
14. Analysis of vinylene carbonate derived SEI layers on graphite anode10.1149/1.1785795 ↗
15. Rate-dependent aging resulting from fast charging of Li-Ion cells10.1149/1945-7111/abace9 ↗
16. Lithium-ion battery fast charging: a review10.1016/j.etran.2019.100011 ↗
17. Change of safety by main aging mechanism – a multi-sensor accelerating rate calorimetry study with commercial Li-ion pouch cells10.1016/j.jpowsour.2023.233046 ↗
18. Arrhenius plots for Li-ion battery ageing as a function of temperature, C-rate, and ageing state – an experimental study10.1016/j.jpowsour.2022.232129 ↗
19. Degradation of commercial lithium-ion cells as a function of chemistry and cycling conditions10.1149/1945-7111/abae37 ↗
20. Fast charging of lithium-ion batteries: a review of materials aspects
21. Editors' choice—capacity fading mechanisms of NCM-811 cathodes in lithium-ion batteries studied by X-ray diffraction and other diagnostics10.1149/2.0821915jes ↗
22. Dependence of cell failure on cut-off voltage ranges and observation of kinetic hindrance in LiNi0.8Co0.15Al0.05O210.1149/2.0491811jes ↗
23. Direct observations of electrochemically induced intergranular cracking in polycrystalline NMC811 particles10.1039/D3TA03057A ↗
24. Research advances on lithium‐ion batteries calendar life prognostic models10.1002/cnl2.192 ↗
25. Adjacent element induction and weak solvation effects enable thermal robust and fast‐charging Graphite anode for lithium‐ion batteries
26. Fluorine and lithium: ideal partners for high-performance rechargeable battery electrolytes10.1002/anie.201901381 ↗
27. Review—post-mortem analysis of aged lithium-ion batteries: disassembly methodology and physico-chemical analysis techniques10.1149/2.1211609jes ↗
28. XPS on li-battery-related compounds: analysis of inorganic SEI phases and a methodology for charge correction10.1021/acsaem.8b00406 ↗
29. Analysis of the chemical composition of the passive film on Li-Ion battery anodes using attentuated total reflection infrared spectroscopy10.1149/1.1575594 ↗
30. Ambient storage derived surface contamination of NCM811 and NCM111: performance implications and mitigation strategies10.1149/2.0011912jes ↗
31. Improved Li-Ion cell construction and usage scheme for achieving operation beyond end-of-life10.1149/1945-7111/ac91ac ↗
32. Electric vehicle battery reuse: preparing for a second life
33. Sternad, M.; Hirtler, G.; Sorger, M.; Knez, D.; Karlovsky, K.; Forster, M.; Wilkening, H. M. R., A Lithium‐Silicon Microbattery with Anode and Housing Directly Made from Semiconductor Grade Monocrystalline Si. Advanced Materials Technologies 2022, 7, (3), 2100405. DOI: https://doi.org/10.1002/admt.202100405.10.1002/admt.202100405 ↗
34. Aging of lithium-ion batteries10.1016/j.jpowsour.2003.09.008 ↗
35. Ageing mechanisms in lithium-ion batteries10.1016/j.jpowsour.2005.01.006 ↗
36. Communication—technique for visualization and quantification of lithium-ion battery separator microstructure10.1149/2.0811606jes ↗
37. Lithium dendrite and solid electrolyte interphase investigation using OsO410.1016/j.jpowsour.2014.04.134 ↗
38. Recovery of isolated lithium through discharged state calendar ageing10.1038/s41586-023-06992-8 ↗
39. Temperature dependence of oxygen release from LiNi0.6Mn0.2Co0.2O2 (NMC622) cathode materials for Li-Ion batteries10.1149/2.1261811jes ↗
40. Surface layer formation on Sn anode: ATR FTIR spectroscopic characterization10.1016/j.electacta.2008.09.021 ↗
41. An X-ray photoelectron spectroscopy primer for solid electrolyte interphase characterization in lithium metal anodes10.1021/acsenergylett.2c01227 ↗
42. Depth-dependent understanding of cathode electrolyte Interphase (CEI) on the layered Li-Ion cathodes operated at extreme high temperature10.1021/acs.chemmater.2c00435 ↗
43. Tailoring the preformed solid electrolyte interphase in lithium metal batteries: impact of fluoroethylene carbonate10.1021/acsami.3c12797 ↗
44. XPS study of sulfur and phosphorus compounds with different oxidation states10.17576/jsm-2018-4708-33 ↗
45. Some effects of intentionally added water on LiCoO2/Graphite pouch cells10.1149/2.0901608jes ↗
46. Surface film formation on a graphite electrode in Li-ion batteries: AFM and XPS study10.1002/sia.2072 ↗
47. XPS-surface analysis of SEI layers on Li-Ion cathodes: part I. Investigation of initial surface chemistry10.1149/2.0061805jes ↗
48. Applications of XPS in the characterization of battery materials10.1016/j.elspec.2018.05.005 ↗