journal article·2026-05Open access

In-situ UV cured deep eutectic solvent-based gel polymer electrolyte for Li metal batteries

Mattia Longo, Matteo Gandolfo, Francesco Schimmenti, Javier Rodriguez del Real, Leire Meabe, Maria Martinez Ibañez, Daniela Fontana, Julia Amici

Abstract

Lithium metal batteries (LMBs) are a promising alternative to obtain high-performance and sustainable energy storage systems, overcoming the energy density limitations of current lithium-ion batteries. However, Li metal hinders their widespread implementation due to high chemical reactivity and dendritic growth, poor interfacial stability and safety concerns linked to the use of flammable liquid electrolytes. Gel polymer electrolytes (GPEs), incorporating non-flammable solvents, have emerged as viable solutions, combining mechanical stability with good electrochemical performance. In this work, a scalable and cheap in-situ fabrication process for a deep eutectic solvent (DES)-based GPE is presented, directly depositing and UV-crosslinking the precursor formulation on the cathode surface. The polyethylene glycol diacrylate-based polymeric matrix is cured in a lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) and trifluoroacetamide (TFA)-based DES, with and without the addition of ethylene carbonate and diethyl carbonate mixture ( g -DES and g -DES10, respectively). Physico-chemical and electrochemical characterizations reveal weaker Li + coordination and improved transport properties and favourable interfacial properties in the presence of the carbonates. Li||LFP cells sporting g -DES10 GPEs exhibited good interfacial stability and stable cycling (163 mAh g −1 over 113 cycles) at room temperature and 1C, demonstrating the suitability of such production processes for scalable, safe and high-performance LMBs. • Non-flammable DES-based gel polymer electrolytes (GPEs) enhance safety and performance in lithium metal batteries (LMBs). • A scalable in-situ method is demonstrated by UV-curing the electrolyte precursor directly onto the cathode surface. • Addition of EC and DEC to g -DES GPE ( g -DES10) results in weaker Li + coordination and enhanced ionic transport. • The optimized GPE shows superior interfacial properties with lithium metal. • Li||LFP cells with g -DES10 GPE deliver stable cycling (163 mAh g -1 , 113 cycles at 1C), showing suitability for LMBs.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Thermal Expansion and Ionic Conductivity

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (66)

Show source-provided references
1. Strategies toward the development of high-energy-density lithium batteries10.1016/j.est.2024.111666 ↗
2. Recent advances and perspectives on thin electrolytes for high-energy-density solid-state lithium batteries10.1039/D0EE02714F ↗
3. Towards high energy density lithium battery anodes: silicon and lithium10.1039/C9SC01201J ↗
4. Enabling high-voltage lithium-metal batteries under practical conditions10.1016/j.joule.2019.05.006 ↗
5. Designing temperature-insensitive solvated electrolytes for low-temperature lithium metal batteries10.1021/jacs.4c01735 ↗
6. Mechanism and solutions of lithium dendrite growth in lithium metal batteries10.1039/D3QM01151H ↗
7. Challenges and progresses of lithium-metal batteries10.1016/j.cej.2021.129739 ↗
8. Ionic conductive polymers as artificial solid electrolyte interphase films in Li metal batteries – a review10.1016/j.mattod.2020.06.011 ↗
9. Promoting mechanistic understanding of lithium deposition and solid‐electrolyte interphase (SEI) formation using advanced characterization and simulation methods: recent progress, limitations, and future perspectives10.1002/aenm.202200398 ↗
10. Lithium metal anodes: present and future10.1016/j.jechem.2019.12.024 ↗
11. Key issues hindering a practical lithium-metal anode10.1016/j.trechm.2019.02.015 ↗
12. Practical challenges and future perspectives of all-solid-state lithium-metal batteries10.1016/j.chempr.2018.11.013 ↗
13. Physicochemical concepts of the lithium metal anode in solid-state batteries10.1021/acs.chemrev.0c00431 ↗
14. In situ preparation of gel polymer electrolyte for lithium batteries: progress and perspectives10.1002/inf2.12232 ↗
15. A brief review of gel polymer electrolytes using in situ polymerization for lithium-ion polymer batteries10.3390/polym15040803 ↗
16. Recent advances in deep eutectic solvents for next-generation lithium batteries: safer and greener10.1016/j.pmatsci.2024.101338 ↗
17. Deep eutectic solvents (DESs) and their applications10.1021/cr300162p ↗
18. Recent advances in application of ionic liquids in electrolyte of lithium ion batteries10.1016/j.est.2021.102659 ↗
19. An overview of deep eutectic solvents: alternative for organic electrolytes, aqueous systems & ionic liquids for electrochemical energy storage10.1016/j.jechem.2023.03.039 ↗
20. An account on the deep eutectic solvents-based electrolytes for rechargeable batteries and supercapacitors
21. Deep eutectic solvents based on N-methylacetamide and a lithium salt as suitable electrolytes for lithium-ion batteries10.1039/c3cp53406e ↗
22. Rapid self-healing gel electrolyte based on deep eutectic solvents for solid-state lithium batteries10.1021/acsami.2c12445 ↗
23. Eutectic solution enables powerful click reaction for in‐situ construction of advanced gel electrolytes10.1002/eem2.12579 ↗
24. Li−N interaction induced deep eutectic gel polymer electrolyte for high performance lithium‐metal batteries10.1002/anie.202205075 ↗
25. Comparative study of photopolymerized gel polymer electrolytes obtained via thiol‐ene click reaction for Li metal batteries10.1002/eem2.70028 ↗
26. Deep eutectic solvent based on lithium bis[(trifluoromethyl)sulfonyl] imide (LiTFSI) and 2,2,2-Trifluoroacetamide (TFA) as a promising electrolyte for a high voltage lithium-ion battery with a LiMn 2 O 4 cathode10.1021/acsomega.0c03099 ↗
27. 23 Na‐NMR data based donor number and their correlation with solvatochromic parameters in binary solvent mixtures10.1002/slct.202003441 ↗
28. Enhancing electrochemical intermediate solvation through electrolyte anion selection to increase nonaqueous Li–O 2 battery capacity10.1073/pnas.1505728112 ↗
29. Electrochemical measurement of transference numbers in polymer electrolytes10.1016/0032-3861(87)90394-6 ↗
30. Enhanced dynamics and charge transport at the eutectic point: a new paradigm for the use of deep eutectic solvent systems10.1021/jacsau.3c00420 ↗
31. More is better: high-entropy electrolyte design in rechargeable batteries10.1039/D3EE03821A ↗
32. Thermal behavior and decomposition kinetics of six electrolyte salts by thermal analysis10.1016/j.jpowsour.2005.05.085 ↗
33. Heat capacity and thermochemical study of trifluoroacetamide (C2H2F3NO)10.1016/S0040-6031(00)00479-2 ↗
34. Lithium salt/amide-based deep eutectic electrolytes for lithium-ion batteries: electrochemical, thermal and computational study10.1039/D0CP01255F ↗
35. Correcting the record: the dimers and trimers of trans-N-methylacetamide10.1039/C6CP07989J ↗
36. Abdelmoulahi · J. Mater. Environ. Sci. · 2015 · 6 · 3094
37. FTIR spectral study of intermolecular interactions of C=O groups of amides in solution10.1016/j.molliq.2022.118838 ↗
38. Cations bind only weakly to amides in aqueous solutions10.1021/ja3119256 ↗
39. Chemical origin of red shift of CO stretching vibration in acetone complexes with various metal cations10.1016/j.chemphys.2009.03.004 ↗
40. Spectroscopic and DFT studies to understand the liquid formation mechanism in the LiTFSI/acetamide complex system10.1016/j.saa.2004.07.032 ↗
41. Investigation on binding between cations and amides using UV Raman spectroscopy10.1063/1674-0068/cjcp2301008 ↗
42. Donor numbers for ionic liquids and carbonate solvents using 7Li and 23Na as probes10.1007/s11814-024-00356-2 ↗
43. Effect of donor number of solvent on the conductivity behaviour of nonaqueous proton-conducting polymer gel electrolytes10.1016/S0167-2738(03)00167-X ↗
44. Decoding the competing effects of dynamic solvation structures on nuclear magnetic resonance chemical shifts of battery electrolytes via machine learning10.1021/jacs.5c02710 ↗
45. Plasticizer ethylene carbonate facilitates new ion coordination site in blend polymer electrolyte: dielectric relaxation through two-parameter Mittag-Leffler function10.1063/5.0018380 ↗
46. Role of mixed solvation and ion pairing in the solution structure of lithium ion battery electrolytes10.1021/acs.jpcc.5b03694 ↗
47. MeTFSI (Me = Li, Na) solvation in ethylene carbonate and fluorinated ethylene carbonate: a molecular dynamics study10.1021/acs.jpcb.0c10622 ↗
48. Raman intensity study of local structure in non-aqueous electrolyte solutions—I. Cation-solvent interaction in LiClO4/ethylene carbonate10.1016/0013-4686(89)87040-9 ↗
49. Solvate structures and spectroscopic characterization of LiTFSI electrolytes10.1021/jp505006x ↗
50. Brouillette · Phys. Chem. Chem. Phys. · 2002 · 4 · 606310.1039/b203776a ↗
51. Tuning the electrolyte network structure to invoke quasi-solid state sulfur conversion and suppress lithium dendrite formation in Li–S batteries10.1038/s41560-018-0214-0 ↗
52. Anions of low Lewis basicity for ionic solid state electrolytes10.1016/S0010-8545(01)00416-7 ↗
53. Enhanced electrochemical properties and optimized Li + transmission pathways of PEO/LLZTO ‐based composite electrolytes modified by supramolecular combination10.1002/eem2.12498 ↗
54. Synergistic theoretical and experimental study on the ion dynamics of bis(trifluoromethanesulfonyl)imide-based alkali metal salts for solid polymer electrolytes10.1039/D3CP02989A ↗
55. Molecular-level insight into charge carrier transport and speciation in solid polymer electrolytes by chemically tuning both polymer and lithium salt10.1021/acs.jpcc.2c07032 ↗
56. Gelation dynamics during photo-cross-linking of polymer nanocomposite hydrogels10.1021/acspolymersau.2c00051 ↗
57. Temperature dependence of the gel modulus depends on change of solvent quality10.1021/acs.macromol.3c01671 ↗
58. Control of gel morphology and properties of a class of metallo-supramolecular polymers by good/poor solvent environments10.1021/ma801046w ↗
59. Gelation dynamics of ionically crosslinked alginate gel with various cations10.1007/s13233-015-3151-9 ↗
60. Light-activated ionic gelation of common biopolymers10.1021/la201860s ↗
61. An efficient gel polymer electrolyte for dendrite-free and long cycle life lithium metal batteries10.1016/j.ensm.2022.01.031 ↗
62. Electro-plating and stripping behavior on lithium metal electrode with ordered three-dimensional structure10.1016/j.nanoen.2018.01.019 ↗
63. New binary room-temperature molten salt electrolyte based on urea and LiTFSI10.1021/jp0119779 ↗
64. Eutectic electrolytes as a promising platform for next-generation electrochemical energy storage10.1021/acs.accounts.0c00360 ↗
65. Fluoroethylene carbonate as electrolyte additive for improving the electrochemical performances of high-capacity Li1.16[Mn0.75Ni0.25]0.84O2 material10.1016/j.electacta.2015.04.030 ↗
66. Performance of lithium-ion cells using 1 M LiPF6 in EC/DEC (v/v = 1/2) electrolyte with ethyl propionate additive10.1007/s11581-009-0413-6 ↗