Predicting MEA catalyst layer performance at 120 °C using a pressurized GDE testing platform and machine learning
Source abstract
Abstract
A pressurized gas diffusion electrode (GDE) platform that extends half-cell testing to 120 °C is employed to provide a medium-throughput evaluation of proton exchange membrane fuel cell (PEMFC) catalyst layers under conditions relevant to heavy-duty PEMFC operation. Using a straight-forward catalyst layer fabrication procedure in combination with data-driven modeling, we systematically optimized five critical fabrication parameters and highlighted their individual influence on performance. Importantly, we systematically validated whether trends observed in pressurized GDE testing transfer to membrane electrode assembly (MEA) operation, an assumption often made but rarely validated experimentally. We show that the performance trends identified in the pressurized GDE setup can be consistently reproduced in MEA testing, with catalyst layers exhibiting higher GDE performance also displaying superior MEA performance in the same relative order. Together, these results demonstrate that medium-throughput pressurized GDE screening, when combined with machine-learning analysis, provides a robust framework to accelerate the transfer of basic to applied research. Catalyst Layer Optimization via Pressurized GDE Testing at 120 °C, Confirmed Transferable to MEA Performance . • Pressurized GDE platform enables catalyst testing at 120 °C and low humidity. • Machine learning reveals key fabrication parameters for catalyst layers. • Optimized catalyst layers retain high activity under dry and humid MEA conditions. • GDE-derived trends reliably predict MEA performance at 120 °C. • Framework accelerates catalyst-layer design with reduced experimental cost.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Machine Learning in Materials Science
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Oxygen reduction reaction measurements on platinum electrocatalysts utilizing rotating disk electrode technique10.1149/2.1071509jes ↗
2. Building upon the koutecky-levich equation for evaluation of next-generation oxygen reduction reaction catalysts10.1016/j.electacta.2017.09.145 ↗
3. Recent advances in catalyst accelerated stress tests for polymer electrolyte membrane fuel cells10.1149/2.0881807jes ↗
4. Effects of carbon supports on Pt distribution, ionomer coverage and cathode performance for polymer electrolyte fuel cells10.1016/j.jpowsour.2016.02.091 ↗
5. Bridging the gap between highly active oxygen reduction reaction catalysts and effective catalyst layers for proton exchange membrane fuel cells10.1038/s41560-021-00824-7 ↗
6. Gas diffusion electrode setup for catalyst testing in concentrated phosphoric acid at elevated temperatures10.1063/1.4908169 ↗
7. Key considerations for high current fuel cell catalyst testing in an electrochemical half-cell10.1149/2.0891704jes ↗
8. Benchmarking fuel cell electrocatalysts using gas diffusion electrodes: Inter-lab comparison and best practices10.1021/acsenergylett.1c02659 ↗
9. Benchmarking high surface area electrocatalysts in a gas diffusion electrode: measurement of oxygen reduction activities under realistic conditions10.1039/C8EE00019K ↗
10. Testing fuel cell catalysts under more realistic reaction conditions: accelerated stress tests in a gas diffusion electrode setup
11. Gas diffusion electrodes for CO2and N2Reduction: a virtual issue10.1021/acsenergylett.2c00606 ↗
12. Benchmarking proton exchange membrane fuel cell cathode catalyst at high current density: a comparison between the rotating disk electrode, the gas diffusion electrode and differential cell
13. GDE vs RDE: impact of operation conditions on intrinsic catalytic parameters of FeNC catalyst for the oxygen reduction reaction
14. The gas diffusion electrode setup as a testing platform for evaluating fuel cell catalysts: a comparative RDE-GDE study
15. A bird's eye perspective of the measurement of oxygen reduction reaction in gas diffusion electrode half-cell set-ups for pt electrocatalysts in acidic media
16. Evaluating electrocatalysts at relevant currents in a half-cell: the impact of Pt loading on oxygen reduction reaction10.1149/2.0911915jes ↗
17. Which insights can gas diffusion electrode half-cell experiments give into activity trends and transport phenomena of membrane electrode assemblies?10.1039/D3YA00055A ↗
18. Temperature effects in polymer electrolyte membrane fuel cells10.1002/celc.202000588 ↗
19. The possibility of intermediate–temperature (120 °C)–operated polymer electrolyte fuel cells using perfluorosulfonic acid polymer membranes10.1149/1945-7111/ac624b ↗
20. Proton conductors for heavy-duty vehicle fuel cells10.1016/j.joule.2021.05.016 ↗
21. Novel polymer electrolyte membranes for automotive applications - requirements and benefits10.1002/fuce.200400038 ↗
22. PEM fuel cell reaction kinetics in the temperature range of 23-120 °C10.1016/j.electacta.2006.09.008 ↗
23. The effect of oxygen partial pressure and humidification in proton exchange membrane fuel cells at intermediate temperature (80–120 °C)
24. Approaches and recent development of polymer electrolyte membranes for fuel cells operating above 100 °C10.1021/cm0310519 ↗
25. Modeling Temperature-, Humidity-, and material-dependent kinetics of the oxygen reduction reaction10.1149/1945-7111/ac60ed ↗
26. Evolution of a GDE setup: beyond ambient conditions
27. Using a pressurized GDE setup to analyze effects of temperature and relative humidity on CO-stripping measurements on a commercial Pt/C ORR catalyst
28. Preparation of PEMFC electrodes from milligram-amounts of catalyst powder10.1149/2.1461707jes ↗
29. Standard and reversible hydrogen electrodes: theory, design, operation, and applications10.1021/acscatal.0c02046 ↗
30. A unified approach to interpreting model predictions
31. Choosing the sample size of a computer experiment: a practical guide10.1198/TECH.2009.08040 ↗
32. PEM fuel cell start-Up/shut-down losses vs relative humidity: the impact of water in the electrode layer on carbon corrosion10.1149/2.0931816jes ↗
33. A review of accelerated stress tests of MEA durability in PEM fuel cells10.1016/j.ijhydene.2008.10.012 ↗
34. A review of PEM fuel cell durability: degradation mechanisms and mitigation strategies10.1016/j.jpowsour.2008.06.006 ↗
35. Detection of membrane drying, fuel cell flooding, and anode catalyst poisoning on PEMFC stacks by electrochemical impedance spectroscopy10.1149/1.2179200 ↗
36. Exploring the composition space of high-entropy alloy nanoparticles for the electrocatalytic H2/CO oxidation with bayesian optimization10.1021/acscatal.2c02563 ↗
37. The pareto principle
38. Dispersion of nafion ionomer aggregates in 1-Propanol/Water solutions: effects of ionomer concentration, alcohol content, and salt addition10.1021/acs.macromol.9b02725 ↗
39. Influence of dispersion media on nafion ® ionomer distribution in proton exchange membrane fuel cell catalyst carbon support10.1016/j.matchemphys.2019.01.015 ↗
40. Be aware of the effect of electrode activation and morphology on its performance in gas diffusion electrode setups
41. Enhanced MEA performance for PEMFCs under low relative humidity and low oxygen content conditions via catalyst functionalization10.1149/2.0051707jes ↗
42. Proton conductivity of nafion 117 as measured by a four-electrode AC impedance method10.1149/1.1836625 ↗
43. Performance comparison of proton exchange membrane fuel cells with nafion and aquivion perfluorosulfonic acids with different equivalent weights as the electrode binders10.1021/acsomega.0c02110 ↗
44. Performance comparison of long and short-side chain perfluorosulfonic membranes for high temperature polymer electrolyte membrane fuel cell operation10.1016/j.jpowsour.2010.12.084 ↗
45. Proton transport through interfaces in nanophase-separation of hydrated aquivion membrane: molecular dynamics simulation approach