journal article·2026-04Open access

Examining paper-based laser-induced graphene and its δ-MnO2 nanocomposite for flexible solid-state supercapacitors: Towards the powering of sustainable and disposable electronics

Nuno F. Santos, Bohdan Kulyk, António J.S. Fernandes, Florinda M. Costa

Abstract

Paper-based laser-induced graphene (paper-LIG) was employed as a sustainable and low-cost electrode for the development of flexible all-solid-state micro-supercapacitors (MSCs). The CO 2 laser scribing generates a porous, conductive 3D multilayered graphene network directly on cellulose paper substrates, eliminating the need for inks, transfer steps or binders. When assembled with a PVA:LiClO 4 gel polymer electrolyte in symmetric configuration, paper-LIG electrodes delivered a capacitance of ∼2.0 mF/cm 2 at 18.5 μA/cm 2 , governed primarily by electric double-layer charge storage. To improve energy density, a conformal pseudocapacitive coating of δ-MnO 2 nanostructures was electrodeposited onto the LIG scaffold. This composite MSC exhibited an increased capacitance of ∼50 mF/cm 2 , corresponding to an energy density of 6 μWh/cm 2 , while maintaining a maximum power above 0.1 mW/cm 2 . Electrochemical impedance spectroscopy and temperature-dependent measurements confirmed that ionic transport within the polymer electrolyte rather than electrode kinetics, is the dominant factor limiting device performance. This detailed and systematic comparison between carbon-based and pseudocapacitive paper-LIG architectures highlights both the promise of δ-MnO 2 -functionalized LIG for boosting energy density, the mechanisms beyond its cycling aging and the critical role of electrolyte in the MSCs performance. These findings provide design guidelines for scalable, disposable energy storage solutions compatible with emerging flexible and wearable electronic platforms. • Laser-induced graphene directly formed on cellulose paper enables binder-free MSCs. • δ-MnO 2 -coated LIG MSCs delivers 50 mF/cm 2 - 20x higher than LIG - and 6 μWh/cm 2 . • EIS and temperature analysis identify electrolyte transport as performance limiter. • Cycling fading traced to irreversible Mn 4+ .→Mn 3+ reduction and loss of pseudocapacitance • Sustainable paper-based MSCs demonstrated for flexible and disposable electronics.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Supercapacitor Materials and Fabrication · Graphene research and applications · Advancements in Battery Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (72)

Show source-provided references
1. Applications of supercapacitors10.1007/978-3-030-52359-6_17 ↗
2. Flexible electrodes and supercapacitors for wearable energy storage: a review by category10.1039/C5TA10582J ↗
3. Electrode materials and device architecture strategies for flexible supercapacitors in wearable energy storage10.1039/D0TA12299H ↗
4. Graphene for flexible and wearable device applications10.1016/j.carbon.2017.05.041 ↗
5. Energy storage: the future enabled by nanomaterials
6. Recent trends in graphene supercapacitors: from large area to microsupercapacitors10.1039/D0SE01849J ↗
7. Laser processing of graphene and related materials for energy storage: state of the art and future prospects10.1016/j.pecs.2021.100981 ↗
8. Recent advances in laser-induced graphene: mechanism, fabrication, properties, and applications in flexible electronics
9. Graphene-based materials for next-generation energy storage: progress, challenges, and future outlook10.1016/j.jallcom.2025.182079 ↗
10. Advances in MoS2-based nanomaterials for supercapacitors, batteries and photovoltaics applications10.1016/j.est.2024.114355 ↗
11. Redox active cation intercalation/Deintercalation in two-dimensional layered MnO2 nanostructures for high-rate electrochemical energy storage10.1021/acsami.6b14612 ↗
12. Ordered mesoporous α-MoO3 with iso-oriented nanocrystalline walls for thin-film pseudocapacitors10.1038/nmat2612 ↗
13. All-graphene core-sheath microfibers for all-solid-state, stretchable fibriform supercapacitors and wearable electronic textiles10.1002/adma.201300132 ↗
14. Simultaneous production of high-performance flexible textile electrodes and Fiber electrodes for wearable energy storage10.1002/adma.201504747 ↗
15. Flexible supercapacitors based on paper substrates: a new paradigm for low-cost energy storage10.1039/C5CS00174A ↗
16. Laser-induced graphene10.1021/acs.accounts.8b00084 ↗
17. Sustainable carbon sources for green laser-induced graphene: a perspective on fundamental principles, applications, and challenges
18. Laser-induced porous graphene films from commercial polymers10.1038/ncomms6714 ↗
19. Biocompatible Parylene-C laser-induced graphene electrodes for microsupercapacitor applications10.1021/acsami.2c09667 ↗
20. Introducing oxidant to expand laser-induced in-plane microsupercapacitor in depth10.1016/j.jpowsour.2022.232394 ↗
21. Laser‐induced graphene formation on wood10.1002/adma.201702211 ↗
22. Laser-induced graphene supercapacitors by direct laser writing of Cork natural substrates10.1021/acsaelm.1c01202 ↗
23. Stable wearable strain sensors on textiles by direct laser writing of graphene10.1021/acsanm.9b01937 ↗
24. Laser-induced graphene from paper for non-enzymatic uric acid electrochemical sensing in urine10.1016/j.carbon.2022.06.013 ↗
25. Conversion of paper and xylan into laser-induced graphene for environmentally friendly sensors10.1016/j.diamond.2022.108855 ↗
26. Laser‐induced graphene from paper by ultraviolet irradiation: humidity and temperature sensors
27. A review of laser-induced graphene: from experimental and theoretical fabrication processes to emerging applications10.1016/j.carbon.2023.118356 ↗
28. IR and UV laser‐induced graphene: application as dopamine electrochemical sensors10.1002/admt.202100007 ↗
29. Laser processing of flexible In-Plane micro-supercapacitors: progresses in advanced manufacturing of nanostructured electrodes10.1021/acsnano.2c02812 ↗
30. Laser-induced graphene from paper for mechanical sensing10.1021/acsami.0c20270 ↗
31. Paper-based laser-induced graphene for sustainable and flexible microsupercapacitor applications10.1007/s00604-022-05610-0 ↗
32. Pseudocapacitive materials
33. Manganese oxide-based materials as electrochemical supercapacitor electrodes10.1039/C0CS00127A ↗
34. Microstructural effects on charge-storage properties in MnO2-Based electrochemical supercapacitors10.1021/am900094e ↗
35. Influence of microstucture on the charge storage properties of chemically synthesized manganese dioxide10.1021/cm020408q ↗
36. Long-term cycling behavior of asymmetric activated carbon/MnO2 aqueous electrochemical supercapacitor10.1016/j.jpowsour.2007.04.074 ↗
37. Ragone plots for electrochemical double-layer capacitors10.1002/batt.202100093 ↗
38. Ratha · 2018
39. Determination of reliable resistance values for electrical double-layer capacitors10.1016/j.powera.2022.100098 ↗
40. Nucleation and growth of electrodeposited manganese dioxide for electrochemical capacitors10.1016/j.electacta.2013.12.014 ↗
41. A systematic spectroscopic study of laboratory synthesized manganese oxides relevant to Mars10.1002/jrs.6231 ↗
42. Raman spectra of natural manganese oxides10.1002/jrs.5583 ↗
43. Microstructures and spectroscopic properties of cryptomelane-type manganese dioxide nanofibers10.1021/jp804924f ↗
44. A reliable method for determining the oxidation state of manganese at the microscale in Mn oxides via Raman spectroscopy10.1111/ggr.12361 ↗
45. Raman spectroscopy study of manganese oxides: layer structures10.2138/am-2021-7666 ↗
46. Effectively modulating oxygen vacancies in flower-like δ-MnO2 nanostructures for large capacity and high-rate zinc-ion storage10.1007/s40820-023-01194-3 ↗
47. Selective synthesis of manganese dioxide polymorphs by the hydrothermal treatment of aqueous KMnO4 solutions10.1134/S0036023621020066 ↗
48. XPS determination of Mn oxidation states in Mn (hydr)oxides10.1016/j.apsusc.2015.12.159 ↗
49. Zn sorption modifies dynamically the layer and interlayer structure of vernadite10.1016/j.gca.2012.02.019 ↗
50. Dandelion-like α-MnO2 hollow spheres with superior catalytic performance for Li-O2 batteries by a facile in situ pyrolysis10.1007/s10853-018-2629-1 ↗
51. Optimization of in situ hydrothermal synthesis of birnessite MnO2/graphene composite: thermodynamic insights and enhanced electrochemical performance for Li-ion battery anodes10.1007/s10854-025-15800-0 ↗
52. Resolving surface chemical states in XPS analysis of first row transition metals, oxides and hydroxides: cr, Mn, Fe, Co and Ni10.1016/j.apsusc.2010.10.051 ↗
53. Electrochemical methods: fundamentals and applications10.1108/acmm.2003.12850eae.001 ↗
54. Review of PVA-based gel polymer electrolytes in flexible solid-state supercapacitors: opportunities and challenges10.1016/j.est.2019.101072 ↗
55. Direct laser writing of MnOx decorated laser-induced graphene on paper for sustainable microsupercapacitor fabrication10.1016/j.flatc.2024.100672 ↗
56. Electrochemical deposition of manganese oxide on paper-based laser-induced graphene for the fabrication of sustainable high-energy-density supercapacitors10.1002/adsu.202400254 ↗
57. Preparation of high-performance flexible microsupercapacitors based on papermaking and laser-induced graphene techniques10.1016/j.electacta.2021.139490 ↗
58. ZnO decorated laser-induced graphene produced by direct laser scribing10.1039/C8NA00391B ↗
59. Vibrational, electrical, and ion transport properties of PVA-LiClO4-sulfolane electrolyte with high cationic conductivity10.1007/s11581-017-2008-y ↗
60. Simulated impedance of diffusion in porous media10.1016/j.electacta.2017.07.152 ↗
61. Modular theory for DC-biased electrochemical impedance response of supercapacitor10.1016/j.jpowsour.2020.228467 ↗
62. On porous electrodes in electrolyte solutions: I. Capacitance effects10.1016/0013-4686(63)80042-0 ↗
63. Influence of the boundaries in the impedance of porous film electrodes10.1039/b001708f ↗
64. Application of the transmission line model for porous electrodes to analyse the impedance response of TiO2 nanotubes in physiological environment10.1016/j.electacta.2017.09.045 ↗
65. Theory of the impedance of electron diffusion and recombination in a thin layer10.1021/jp011941g ↗
66. Electrochemical and photoluminescence response of laser-induced graphene/electrodeposited ZnO composites10.1038/s41598-021-96305-8 ↗
67. New solid-state electric double-layer capacitor using poly(vinyl alcohol)-based polymer solid electrolyte10.1016/0378-7753(91)80047-2 ↗
68. Theoretical and experimental analysis of porous electrodes for lithium-ion batteries by electrochemical impedance spectroscopy using a symmetric cell10.1149/2.057207jes ↗
69. Preparation and properties of polymer solid electrolytes using poly(vinyl alcohol) and thermally resistive poly[arylene(1,3-imidazolidine-2,4,5-trione-1,3-diyl)] as matrix polymers10.1021/cm00037a011 ↗
70. Ionic conduction in polymer-based solid electrolytes
71. Mechanistic study of cathodic electrodeposition of zinc oxide and zinc hydroxychloride films from oxygenated aqueous zinc chloride solutions10.1149/1.1838359 ↗
72. Effect of incorporation of different plasticizers on structural and ion transport properties of PVA-LiClO4 based electrolytes10.1016/j.heliyon.2018.e00992 ↗