Revisiting irreversible capacity in lignin-derived hard carbons for sodium-ion batteries: The dominant role of surface functional groups over surface area
Source abstract
Abstract
Hard carbons are promising materials as anode for sodium-ion batteries due to their good reversible capacities and the huge diversity of bio-based precursors available for their synthesis. Nevertheless, their low initial coulombic efficiency (ICE), often below 80% for bio-based hard carbons, is one of the main challenges for their commercial applications. In this work, the surface of lignin-based hard carbons is modified with a thin layer of soft carbon obtained from petroleum pitch. Soft carbon is known to have rich sp 2 -hybridized domains, with very few heteroatoms, leading to a surface with less defects. After pyrolysis at different temperatures (900 °C to 1400 °C), hard carbon materials were coated using an impregnation coating method. Structural, textural and surface analyses were carried out to understand the impact of soft carbon coating on the electrochemical performance. The composite carbon initially pyrolyzed at 1200 °C exhibited the best performance, achieving a reversible capacity of 310 mAh.g −1 , and an excellent initial coulombic efficiency of 89%. Notably, this ICE is among the highest reported for lignin-based hard carbons, which highlights the effectiveness of surface engineering in enhancing their electrochemical properties for sodium-ion batteries. • Hard carbons derived from lignin promote sustainable Na-ion battery design. • Pitch-derived soft carbon coating reduces surface defects of hard carbon. • Surface engineering boosts initial coulombic efficiency of bio-based hard carbons. • The optimized soft carbon-hard carbon composite achieves 310 mAh g −1 with 89% ICE.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Fiber-reinforced polymer composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. The development and future of lithium ion batteries10.1149/2.0251701jes ↗
2. Critical materials for electrical energy storage: Li-ion batteries10.1016/j.est.2022.105471 ↗
3. Electrochemical intercalation of sodium in graphite10.1016/0167-2738(88)90351-7 ↗
4. High capacity anode materials for rechargeable sodium-ion batteries10.1149/1.1393348 ↗
5. Revealing sodium ion storage mechanism in hard carbon10.1016/j.carbon.2018.12.112 ↗
6. Design advanced carbon materials from lignin-based interpenetrating polymer networks for high performance sodium-ion batteries10.1016/j.cej.2018.02.016 ↗
7. Advanced lignin-derived hard carbon for Na-ion batteries and a comparison with Li and K ion storage10.1016/j.carbon.2019.10.045 ↗
8. Carbon with expanded and well-developed graphene planes derived directly from condensed lignin as a high-performance anode for sodium-ion batteries10.1021/acsami.7b14776 ↗
9. Pyrolysis temperature dependence of sodium storage mechanism in non-graphitizing carbons10.1016/j.carbon.2023.03.055 ↗
10. Rationally regulating closed pore structures by pitch coating to boost sodium storage performance of hard carbon in low-voltage platforms
11. Engineering hard carbon with high initial coulomb efficiency for practical sodium-ion batteries10.1016/j.jpowsour.2021.229656 ↗
12. Influence of phosphorus activation and carbonization temperature on the electrochemical performance of hard carbon made from olive pomace as an anode for sodium-ion batteries10.1039/D5RA02547H ↗
13. Low‐defect and low‐porosity hard carbon with high coulombic efficiency and high capacity for practical sodium ion battery anode10.1002/aenm.201703238 ↗
14. Engineering Al2O3 atomic layer deposition: enhanced hard carbon-electrolyte interface towards practical sodium ion batteries10.1016/j.nanoen.2019.103903 ↗
15. Ultrathin artificial solid electrolyte interface layer-coated biomass-derived hard carbon as an anode for sodium-ion batteries10.1021/acsaem.1c03425 ↗
16. Effect of vapor carbon coating on the surface structure and sodium storage performance of hard carbon spheres10.1002/ente.201900779 ↗
17. One stone two birds: pitch assisted microcrystalline regulation and defect engineering in coal-based carbon anodes for sodium-ion batteries10.1016/j.ensm.2023.01.042 ↗
18. Pore structure modification of pitch-derived hard carbon for enhanced pore filling sodium storage10.1002/ente.202200612 ↗
19. CVD-coated carbon xerogels for negative electrodes of Na-ion batteries10.1016/j.carbon.2024.119077 ↗
20. New template synthesis of anomalously large capacity hard carbon for Na‐ and k‐ion batteries10.1002/aenm.202302647 ↗
21. Tracking sodium cluster dynamics in hard carbon with a low specific surface area for sodium‐ion batteries10.1002/aenm.202304300 ↗
22. Soft-carbon-coated, free-standing, low-defect, hard-carbon anode to achieve a 94% initial coulombic efficiency for sodium-ion batteries10.1021/acsami.1c12171 ↗
23. Hard–soft carbon composite anodes with synergistic sodium storage performance
24. Enhancing the sodium storage performance of hard carbon by constructing thin carbon coatings via esterification reactions10.1016/j.jcis.2024.08.051 ↗
25. Optimizing hard carbon materials for sodium-ion batteries: insights from particle size and soft carbon-coating strategy10.1016/j.jpowsour.2024.235792 ↗
26. Quantifying inactive lithium in lithium metal batteries10.1038/s41586-019-1481-z ↗
27. Correlation of structure and performance of hard carbons as anodes for sodium ion batteries10.1021/acs.chemmater.9b01768 ↗
28. Reporting physisorption data for gas/solid systems with special reference to the determination of surface area and porosity10.1351/pac198254112201 ↗
29. Hard carbon from a sugar derivative for next-generation sodium-ion batteries10.1039/D4MH01118J ↗
30. Comments on the XPS analysis of carbon materials10.3390/c7030051 ↗
31. Accessing the robustness of adventitious carbon for charge referencing (correction) purposes in XPS analysis: insights from a multi-user facility data review10.1016/j.apsusc.2022.153681 ↗
32. High power NVPF/HC-based sodium-ion batteries10.1016/j.jpowsour.2023.233741 ↗
33. MgO-Template synthesis of extremely high capacity hard carbon for Na-Ion battery10.1002/anie.202013951 ↗
34. Solid electrolyte interface stabilization via surface oxygen species functionalization in hard carbon for superior performance sodium-ion batteries10.1039/C9TA12429B ↗
35. Conformational engineering of solvent molecules for high‐voltage and fast‐charging lithium metal batteries
36. Single‐molecule dual‐anchor design enables extreme‐condition lithium metal batteries through solvation reconstruction and cathode polymerization10.1002/anie.202513321 ↗
37. Conjugated topologically confined composite electrolytes for robust high-voltage and high-temperature semi-solid-state lithium metal batteries10.1039/D5EE04892C ↗
38. A Raman study to obtain crystallite size of carbon materials: a better alternative to the Tuinstra-Koenig law10.1016/j.carbon.2014.09.006 ↗