journal article·2026-04Open access

Uncertainty in solid phase diffusivity determination: Comparing electrode parameterization workflows for P2D modeling of commercial battery cells

F. Röder, H. Harimi, F. Schomburg, M. Han, J.C. Wurzenberger, C. Lechner, S. Kutschi

Abstract

The pseudo-two-dimensional (P2D) battery model is a cornerstone of battery research, striking a critical balance between accuracy and computational efficiency for mathematical modeling of battery cells. It captures essential mechanistic parameters while remaining applicable for optimizing battery design and operation. It also often serves as the basis for aging modeling, a key challenge in the advancement of lithium-ion battery technology. However, wider adoption of P2D models is hindered by parameterization challenges, in particular the demanding time and experimental requirements of direct measurement strategies that preserve the full value of physically meaningful parameters. Among these, the solid phase diffusion coefficient, which is highly dependent on the lithium concentration in the active material particles, is particularly challenging. While Galvanostatic Intermittent Titration Technique (GITT) is widely used to measure it, its assumptions break down in phase-change materials and thick porous electrodes as used in commercial battery cells. This work evaluates different methods for determining diffusion coefficients, focusing on their impact on parameter plausibility and model accuracy under dynamic driving conditions. A novel approach is introduced to identify invalid GITT measurements and probability distribution of diffusion coefficient, allowing the construction of accurate models with plausible parameters.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Battery Technologies Research · Advancements in Battery Materials · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Modeling of galvanostatic charge and discharge of the lithium/polymer/insertion cell10.1149/1.2221597 ↗
2. Simulating the impact of particle size distribution on the performance of graphite electrodes in lithium-ion batteries10.1002/ente.201600232 ↗
3. Conductive networks and their impact on uncertainty, degradation, and failure of lithium-ion battery electrodes10.1021/acsaem.1c00416 ↗
4. The Newman model for phase-change electrodes: Physics-based hysteresis10.1149/1945-7111/adb219 ↗
5. Lithium-ion battery degradation: How to model it10.1039/D2CP00417H ↗
6. A pseudo 3D electrochemical-thermal modeling and analysis of a lithium-ion battery for electric vehicle thermal management applications10.1016/j.applthermaleng.2017.07.060 ↗
7. Parametrization of physics-based battery models from input–output data: A review of methodology and current research10.1016/j.jpowsour.2021.230859 ↗
8. Electrochemical modeling and parameterization towards control-oriented management of lithium-ion batteries10.1016/j.conengprac.2022.105176 ↗
9. Development of experimental techniques for parameterization of multi-scale lithium-ion battery models10.1149/1945-7111/ab9050 ↗
10. Parameterization of a physico-chemical model of a lithium-ion battery: I. determination of parameters10.1149/2.0551509jes ↗
11. Physico-chemical parameter measurement and model response evaluation for a pseudo-two-dimensional model of a commercial lithium-ion battery10.1016/j.electacta.2021.138287 ↗
12. Full cell parameterization of a high-power lithium-ion battery for a physico-chemical model: Part I. physical and electrochemical parameters10.1149/2.0321816jes ↗
13. Resolving the discrepancy in tortuosity factor estimation for Li-Ion battery electrodes through micro-macro modeling and experiment10.1149/2.0731814jes ↗
14. Review of computational parameter estimation methods for electrochemical models10.1016/j.est.2021.103388 ↗
15. Enabling high-fidelity electrochemical P2D modeling of lithium-ion batteries via fast and non-destructive parameter identification10.1016/j.ensm.2021.12.044 ↗
16. Parameter estimation of the Doyle–Fuller–Newman model for lithium-ion batteries by parameter normalization, grouping, and sensitivity analysis10.1016/j.jpowsour.2021.229901 ↗
17. Practical identifiability of electrochemical P2D models for lithium-ion batteries10.1007/s10800-021-01579-5 ↗
18. A new design of experiment method for model parametrisation of lithium ion battery
19. Determination of the solid state diffusion coefficient of Li-Ion battery single-phase materials using thin model electrodes10.1149/1945-7111/adbfc5 ↗
20. Direct determination of diffusion coefficients in commercial Li-Ion batteries10.1149/2.0301805jes ↗
21. Electrochemical techniques for intercalation electrode materials in rechargeable batteries10.1021/acs.accounts.7b00031 ↗
22. Method—AMIDR: A complete pulse method for measuring cathode solid-state diffusivity10.1149/1945-7111/ad2953 ↗
23. Electrochemical modeling of GITT measurements for improved solid-state diffusion coefficient evaluation10.1021/acsaem.1c02218 ↗
24. Galvanostatic intermittent titration technique reinvented: Part I. a critical review
25. GITT analysis of lithium insertion cathodes for determining the lithium diffusion coefficient at low temperature: Challenges and pitfalls10.1149/1945-7111/ab9404 ↗
26. Galvanostatic intermittent titration technique for phase-transformation electrodes10.1021/jp9113333 ↗
27. Electrochemical techniques in battery research: A tutorial for nonelectrochemists10.1002/aenm.201900747 ↗
28. Full parameterization study of a high-energy and high-power Li-Ion cell for physicochemical models10.1149/1945-7111/ace1a7 ↗
29. Tortuosity determination of battery electrodes and separators by impedance spectroscopy10.1149/2.1141607jes ↗
30. Thermodynamically consistent modeling of elementary electrochemistry in lithium-ion batteries10.1016/j.electacta.2010.08.018 ↗
31. Temperature and concentration dependence of the ionic transport properties of lithium-ion battery electrolytes10.1149/2.0571912jes ↗
32. Including double-layer capacitance in lithium-ion battery mathematical models10.1016/j.jpowsour.2013.11.044 ↗
33. A review and perspective on path dependency in batteries10.1002/ente.202200627 ↗
34. Understanding kinetic and thermodynamic properties of blended cathode materials for lithium-ion batteries
35. Analysis of lithium-ion battery state and degradation via physicochemical cell and SEI modeling10.1002/batt.202200067 ↗
36. Degradation of lithium-ion batteries under automotive-like conditions: P2D model-based understanding and ex-situ validation10.1016/j.etran.2025.100410 ↗
37. Cell-to-cell variation beyond parameter analysis — Identification and correlation of processes in lithium-ion batteries using a combined distribution of relaxation times analysis10.1016/j.jpowsour.2023.233677 ↗
38. Detection of inhomogeneities in serially connected lithium-ion batteries10.1016/j.apenergy.2022.120514 ↗
39. The importance of degradation mode analysis in parameterising lifetime prediction models of lithium-ion battery degradation10.1038/s41467-025-57968-3 ↗
40. Degradation path indicators for lithium-ion batteries10.1016/j.est.2025.119113 ↗
41. Generative learning assisted state-of-health estimation for sustainable battery recycling with random retirement conditions10.1038/s41467-024-54454-0 ↗
42. Collaborative and privacy-preserving retired battery sorting for profitable direct recycling via federated machine learning10.1038/s41467-023-43883-y ↗