Stability-performance trade-off in multi-metal layered oxide cathode material derived from Al-Zr modified Ni-Co-Zn-(OH)2 precursor
Source abstract
Abstract
The pursuit of high-electrochemical-performance cathodes demands precise control over synthesis to manage stability-performance trade-offs. Here, we present a systematically optimized sol-gel-assisted solid-state method for synthesizing aluminum and zirconium co-doped high-nickel layered oxide containing cobalt and zinc (LiNi0.8Co0.05Zn0.05Al0.08Zr0.02O2), achieving a structure with minimized cation disorder. Electrochemical investigation reveals that the co-doped cathodes exhibit a remarkable initial discharge capacity of 214.7 mAh/g with good long-term cycling performance in the 2.7-4.4 V electrochemical window. However, Cyclic Voltammetry (CV) and rate performance tests reveal a critical performance trade-off. While co-doping enhances structural stability through a dual bulk and surface mechanism, it promotes the formation of tightly fused primary particles and a dense, low-porosity architecture. This morphology significantly constricts available electrolyte diffusion pathways, although intrinsic ionic diffusivity is improved, Li+ ions must navigate extended distances through the secondary particle bulk. This increased diffusion length results in a substantial reduction in CV peak currents, ultimately limiting rate capability. These findings underscore that optimizing powder morphology through fine-tuned dopant concentrations is essential to balancing the stability-rate trade-off in future high-energy cathode designs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Molten salt chemistry and electrochemical processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (64)
Show source-provided references
1. Layered lithium insertion material of LiCo1/3Ni1/3Mn1/3O2 for lithium-ion batteries10.1246/cl.2001.642 ↗
2. Layered lithium transition metal oxide cathodes towards high energy lithium-ion batteries10.1039/c2jm14305d ↗
3. Al–Zr dual-doping enhancing the electrochemical performance of spinel LiMn2O4 cathodes10.1088/1674-1056/adc085 ↗
4. Ab initio calculation of the intercalation voltage of lithium-transition-metal oxide electrodes for rechargeable batteries10.1016/S0378-7753(96)02638-9 ↗
5. Understanding electrochemical potentials of cathode materials in rechargeable batteries10.1016/j.mattod.2015.10.009 ↗
6. LiNi0.8Fe0.1Al0.1O2 as a cobalt-free cathode material with high capacity and high capability for lithium-ion
7. Electrochemical performance of cobalt free, Li 1.2(Mn 0.32Ni 0.32Fe 0.16)O 2 cathodes for lithium batteries10.1016/j.electacta.2012.02.076 ↗
8. Recent advances in layered LiNi x CoyMn1−x−y O2 cathode materials for lithium ion batteries10.1007/s10008-008-0671-7 ↗
9. Zinc-Doped High-Nickel, low-cobalt layered oxide cathodes for high-energy-density lithium-ion batteries10.1021/acsami.1c01824 ↗
10. Li-Nb-O Coating/Substitution enhances the electrochemical performance of the LiNi0.8Mn0.1Co0.1O2 (NMC 811) cathode10.1021/acsami.9b09696 ↗
11. A universal multifunctional dual cation doping strategy towards stabilized ultra-high nickel cobalt-free lithium layered oxide cathode10.1016/j.jechem.2024.03.030 ↗
12. An in situ structural study on the synthesis and decomposition of LiNiO210.1039/C9TA12073D ↗
13. The effect of synthesis and zirconium doping on the performance of nickel-rich NCM622 cathode materials for Li-ion batteries10.1007/s10008-021-04933-x ↗
14. Synthesis and electrochemical study of Zr-doped Li[Li0.2Mn0.54Ni0.13Co0.13]O2 as cathode material for Li-ion battery10.1016/j.ceramint.2015.08.104 ↗
15. Al, Zr dual-doped cobalt-free nickel-rich cathode materials for lithium-ion batteries10.1016/j.pnsc.2022.12.004 ↗
16. Dual elements coupling effect induced modification from the surface into the bulk lattice for Ni-Rich cathodes with suppressed capacity and voltage decay10.1021/acsami.9b18946 ↗
17. Confining oxygen anion to stabilize layered oxide Li1.2Ni0.2Mn0.6O2 via Zr-Al dual doping10.1016/j.progsolidstchem.2024.100441 ↗
18. Synergistic modulation of lattice stability and high-voltage 4.5 V interface dynamics in quasi-single-crystal LiNi0.9Co0.05Mn0.05O2 cathode via Al/Zr Co-doping and coating10.1016/j.jelechem.2025.119441 ↗
19. Synthesis and characterization of Al and zr-dual-doped lithium cobalt oxide cathode for Li-ion batteries using a facile hydrothermal approach10.1016/j.colsurfa.2022.128493 ↗
20. New insights in Al-doping effects on the LiNiO2 positive electrode material by a sol-gel method10.1002/er.6536 ↗
21. Enabling high energy lithium metal batteries via single-crystal Ni-rich cathode material co-doping strategy10.1038/s41467-022-30020-4 ↗
22. Effect of Zn, Cu and Mg doping on the structural characteristic of LiNi0.6Mn0.2Co0.2O2 (NMC622)
23. Synthesis and electrochemical properties of Zn-doping LiNi1/3Co1/3Mn1/3O2 cathode material for lithium-ion battery application10.1007/s10854-020-03787-9 ↗
24. Improved electrochemical stability of Zn-Doped LiNi1/3Co1/3Mn1/3O2 cathode materials10.3866/PKU.WHXB201205152 ↗
25. Cobalt-free nickel-rich cathode materials based on Al/Mg co-doping of LiNiO2 for lithium ion battery10.1016/j.jcis.2023.01.134 ↗
26. Air storage impact on surface evolution of stoichiometric and Li-Rich NMC81110.1021/acsomega.4c06636 ↗
27. Co/Ti co-substituted layered LiNiO2 prepared using a concentration gradient method as an effective cathode material for Li-ion batteries10.1016/j.jpowsour.2017.10.021 ↗
28. Quantification of heterogeneous degradation in li‐ion batteries10.1002/aenm.201900674 ↗
29. A facile method to synthesize spherical LiNi0.8Co0.15Al0.05O2 cathode material10.1007/s10854-017-7819-0 ↗
30. Structural evolution and formation mechanism of LiNiO2 during high-temperature solid-state synthesis
31. Synthesis of LiNiO2 by two-step solid-state method10.1515/msp-2018-0015 ↗
32. Low-temperature synthesis of LiCoO2 with eutectic of lithium precursors via the solid-state reaction method10.1080/21870764.2018.1523105 ↗
33. Deeper understanding of the lithiation reaction during the synthesis of LiNiO 2 towards an increased production throughput10.1149/1945-7111/ac6c0b ↗
34. Effect of calcination temperatures on ratio of atomic weight of Al/O in sol-gel method for synthesis γ Al2O3 as a buffer catalyst10.1088/1757-899X/214/1/012028 ↗
35. Microwave assisted sol-gel synthesis of tetragonal zirconia nanoparticles10.1016/j.jallcom.2011.03.138 ↗
36. From surface ZrO2 coating to Bulk Zr doping by high temperature annealing of nickel-rich lithiated oxides and their enhanced electrochemical performance in lithium ion batteries10.1002/aenm.201701682 ↗
37. Cobalt-free nickel-rich layered LiNi0.9Al0.1-xZrxO2 cathode for high energy density and stable lithium-ion batteries10.1016/j.jtice.2022.104421 ↗
38. Boron doping and LiBO2 coating synergistically enhance the high-rate performance of LiNi0.6Co0.1Mn0.3O2 cathode materials10.1021/acssuschemeng.0c09265 ↗
39. Elucidation of synergistic effect of mg-co-doping on electrochemical performance of Mn-doped LiNiO210.1016/j.jelechem.2022.116675 ↗
40. Effect of Zr doping and Al-Zr co-doping on LiNi0.5Co0.25Mn0.25O2 for lithium-ion batteries10.1016/j.ssi.2019.115220 ↗
41. Facile synthesis of the Li-rich layered oxide Li1.23Ni 0.09Co0.12Mn0.56O2 with superior lithium storage performance and new insights into structural transformation of the layered oxide material during charge-discharge cycle: in situ XRD characterization10.1021/am405844b ↗
42. Al-doping induced superior lithium ion storage capability of LiNiO2 spheres10.1016/j.ceramint.2020.05.078 ↗
43. Synthesis and electrochemical performance of macroporous LiNi 0.5Co0.2Mn0.3O2 by a modified sol-gel method10.1016/j.jallcom.2013.07.007 ↗
44. On the ageing of high energy lithium-ion batteries-comprehensive electrochemical diffusivity studies of Harvested Nickel Manganese Cobalt Electrodes10.3390/ma11020176 ↗
45. Effect of calcination temperature of size controlled microstructure of lini0.8co0.15al0.05o2 cathode for rechargeable lithium battery10.5012/bkcs.2014.35.2.357 ↗
46. Effect of calcination temperature on the electrochemical properties of nickel-rich LiNi0.76Mn0.14Co0.10O2 cathodes for lithium-ion batteries10.1016/j.nanoen.2018.04.077 ↗
47. Synthesis and charecterization of Li[Ni1/3Co1/3Mn1/3]O2 as A cathode material by A HMTA-Nitrate combustion method
48. Quantitative analysis of Ni2+/Ni3+ in Li[NixMnyCoz]O2 cathode materials: Non-linear least-squares fitting of XPS spectra10.1016/j.apsusc.2018.02.114 ↗
49. Doping‐Induced surface and grain boundary effects in Ni‐Rich layered cathode materials10.1002/smll.202307678 ↗
50. Selective dopant segregation modulates mesoscale reaction kinetics in layered transition metal oxide10.1016/j.nanoen.2021.105926 ↗
51. Aluminum-doping induced micro-porous structure and improved anion redox reversibility in cobalt-free lithium-rich cathode materials for its enhanced electrochemical performance10.1016/j.cej.2023.145552 ↗
52. Optimization of layered cathode materials for lithium-ion batteries10.3390/ma9070595 ↗
53. Polycrystalline VO2(M) with well-dispersed crystalline zones for enhanced electroactivity of lithium-ion batteries10.1016/j.jallcom.2019.152122 ↗
54. Suppressing the H2–H3 phase transition of LiNi0.90Co0.04Mn0.03Al0.03O2 cathodes via Ta doping towards improved electrochemical performance upon 4.5V10.1016/j.ceramint.2023.04.059 ↗
55. Recent advances of cathode materials for zinc-ion hybrid capacitors10.1016/j.nanoen.2023.108290 ↗
56. Understanding and applying coulombic efficiency in lithium metal batteries10.1038/s41560-020-0648-z ↗
57. Recent progress on electrolyte boosting initial coulombic efficiency in lithium‐ion batteries
58. Initial coulombic efficiency as a descriptor of structural evolution in layered cathode materials10.1002/smll.202509868 ↗
59. The effect of tetravalent titanium substitution in LiNi1-xTixO2 (0.025≤x≤0.2) system10.1016/S1388-2481(00)00151-X ↗
60. Yilmaz · 2023
61. Problems and their origins of Ni-rich layered oxide cathode materials10.1016/j.ensm.2019.08.013 ↗
62. Collaboratively enhancing electrochemical properties of LiNi0.83Co0.11Mn0.06O2 through doping and coating of quadrivalent elements10.1007/s12598-023-02356-3 ↗
63. Synergy-electrode based on micron-sized LiNi0.5Mn0.3Co0.2O2/LiFePO4 particles with bimodal size distribution10.1016/j.ssi.2025.117000 ↗
64. The Production and characterization of tin (II) oxide composite anode electrodes for lithium ion batteries