journal article·2026-04Open access

Decoupling activation from passivation in high-rate Li-rich Mn-based layered oxides through the construction of a conductive LiFePO4 island architecture

Eunki Kim, Joo-Hyung Kim, Joon Ha Chang, Juhyoung Kim, Jun Ho Shin, Junhee Lee, Garam Lee, Ho Jin Lee, Kwangjin Park, Dong Wook Kim, San Moon

Abstract

Although Li-rich Mn-based layered oxides (LMRs) exhibit high specific capacities (>250 mAh g −1 ) through anionic redox activity and are therefore promising next-generation cathode materials for high-energy Li-ion batteries, their commercialization is severely hindered by voltage fading, structural degradation, and safety concerns arising from surface instability. To address these problems, we deposited an insular protective layer of carbon-coated LiFePO 4 (C-LFP) nanoparticles on LMR secondary particles using a scalable solvent-free mechanofusion strategy. The optimal coating (C-LFP loading = 0.75 wt%) notably enhanced electrochemical performance, resulting in a capacity retention of 60.7% at 3C (cf. 38% for pristine LMR) and 93.43% after 200 cycles at 0.5C while suppressing voltage fading. According to the proposed synergistic mechanism, C-LFP provided electronic conductivity exceeding that of bare LMR, the insular morphology preserved direct electron transport pathways, and the nanoscale C-LFP particle size enabled rapid Li-ion transport and shortened diffusion lengths. The C-LFP coating prevented the formation of highly resistive rock-salt degradation layers, maintained a low interfacial impedance, and suppressed Mn dissolution (>95% reduction) and O 2 evolution. Thus, this work demonstrates that rationally designed surface modification can unlock the full potential of LMR cathodes for next-generation energy storage applications.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Lithium-ion battery recycling in the circular economy: a review10.3390/recycling7030033 ↗
2. Transportation of electric vehicle lithium-ion batteries at end-of-life: a literature review10.1016/j.resconrec.2021.105755 ↗
3. Battery materials for low-cost electric transportation10.1016/j.mattod.2020.09.027 ↗
4. Challenges and the way to improve lithium‐ion battery technology for next‐generation energy storage10.1002/eem2.70088 ↗
5. The energy-storage frontier: lithium-ion batteries and beyond10.1557/mrs.2015.259 ↗
6. Electron and ion transport in lithium and lithium-ion battery negative and positive composite electrodes10.1021/acs.chemrev.2c00214 ↗
7. Electrical energy storage for transportation—approaching the limits of, and going beyond, lithium-ion batteries10.1039/c2ee21892e ↗
8. The lithium-ion battery: state of the art and future perspectives10.1016/j.rser.2018.03.002 ↗
9. An outlook on lithium ion battery technology10.1021/acscentsci.7b00288 ↗
10. Lithium-ion battery for electronic applications10.1016/0378-7753(94)02059-C ↗
11. A review of lithium-ion battery for electric vehicle applications and beyond10.1016/j.egypro.2019.01.783 ↗
12. A review on the key issues for lithium-ion battery management in electric vehicles10.1016/j.jpowsour.2012.10.060 ↗
13. Impact of high-power charging on the durability and safety of lithium batteries used in long-range battery electric vehicles10.1016/j.apenergy.2019.113793 ↗
14. Lithium-ion batteries—The crux of electric vehicles with opportunities and challenges10.3390/cleantechnol4040056 ↗
15. Lithium-ion battery fundamentals and exploration of cathode materials: a review10.1016/j.sajce.2024.09.008 ↗
16. Electrochemical and physical properties of layered-spinel composite cathode powders prepared by spray pyrolysis10.1016/S1452-3981(23)16530-8 ↗
17. An overview on the advances of LiCoO2 cathodes for lithium‐ion batteries10.1002/aenm.202000982 ↗
18. Valuation of surface coatings in high-energy density lithium-ion battery cathode materials10.1016/j.ensm.2021.03.015 ↗
19. Recent advances and remaining challenges for lithium ion battery cathodes10.1149/2.0461701jes ↗
20. Advances in manganese-oxide ‘composite’electrodes for lithium-ion batteries10.1039/b417616m ↗
21. Lithium‐and manganese‐rich oxide cathode materials for high‐energy lithium ion batteries10.1002/aenm.201600906 ↗
22. The positive role of (NH4)3AlF6 coating on Li[Li0.2Ni0.2Mn0.6]O2 oxide as the cathode material for lithium-ion batteries10.1039/C6RA24947G ↗
23. Cathode materials review
24. Surface modification of Li‐rich Mn‐based layered oxide cathodes: challenges, materials, methods, and characterization10.1002/aenm.202002506 ↗
25. Comprehensive review of li‐rich mn‐based layered oxide cathode materials for lithium‐ion batteries: theories, challenges, strategies and perspectives10.1002/cssc.202401120 ↗
26. Review on challenges and recent advances in the electrochemical performance of high capacity li‐and mn‐rich cathode materials for li‐ion batteries10.1002/aenm.201702397 ↗
27. Li‐and mn‐rich cathode materials: challenges to commercialization10.1002/aenm.201601284 ↗
28. Li-and Mn-rich layered oxide cathode materials for lithium-ion batteries: a review from fundamentals to research progress and applications10.1039/C8ME00025E ↗
29. Surface modification of over-lithiated layered oxides with PEDOT: PSS conducting polymer in lithium-ion batteries10.1149/2.0801504jes ↗
30. Direct in situ observation of Li2O evolution on Li-Rich high-capacity cathode material, Li[NixLi(1–2x)/3Mn(2–x)/3]O2 (0 ≤ x ≤0.5)10.1021/ja410137s ↗
31. Li-rich layered oxide cathodes for next-generation Li-ion batteries: chances and challenges10.1149/2.0111514jes ↗
32. Electrochemical activation of Li2MnO3 electrodes at 0° C and its impact on the subsequent performance at higher temperatures10.3390/ma13194388 ↗
33. Synthesis–structure relationships in Li-and Mn-rich layered oxides: phase evolution, superstructure ordering and stacking faults10.1039/D2DT00104G ↗
34. Enhancing phase stability and kinetics of lithium-rich layered oxide for an ultra-high performing cathode in Li-ion batteries10.1016/j.jpowsour.2015.01.158 ↗
35. Surface modification of cathode materials from nano-to microscale for rechargeable lithium-ion batteries10.1039/c0jm00508h ↗
36. Ni‐rich/Co‐poor layered cathode for automotive li‐ion batteries: promises and challenges10.1002/aenm.201903864 ↗
37. Thermal stability of Lithium-ion batteries: case study of NMC811 and LFP cathode materials10.1016/j.matpr.2022.02.324 ↗
38. Structural stability and Li-ion transport property of LiFePO4 under high-pressure10.1016/j.ssi.2017.01.026 ↗
39. Recent progress in cathode materials research for advanced lithium ion batteries10.1016/j.mser.2012.05.003 ↗
40. A review on application of LiFePO4 based composites as electrode materials for lithium ion batteries10.20964/2021.06.33 ↗
41. Lithium batteries and cathode materials10.1021/cr020731c ↗
42. A black zirconia cathode coating layer enabling facile charge diffusion and surface lattice stabilization for lithium-ion batteries10.1039/D4TA05179C ↗
43. A high-quality mechanofusion coating for enhancing lithium-ion battery cathode material performance10.1557/mrc.2018.209 ↗
44. Numerical simulation of mechanofusion system10.1016/j.powtec.2004.07.014 ↗
45. Mechanism of the combined coating-mechanofusion processing of powders10.1016/0032-5910(89)80094-4 ↗
46. Optimizing carbon coating process for lithium-rich LiFePO4 cathode materials10.1002/cssc.202402558 ↗
47. Effect of conductive material morphology on spherical Lithium iron phosphate10.3390/nano8110904 ↗
48. Valuation of surface coatings in high-energy density lithium-ion battery cathode materials10.1016/j.ensm.2021.03.015 ↗
49. Comparative analysis of chemical redox between redox shuttles and a lithium-ion cathode material via electrochemical analysis of redox shuttle conversion10.1149/1945-7111/ac0068 ↗
50. Recent progress in carbon coating and surface modification of LiFePO4 cathodes10.1039/D5RA05833C ↗