journal article·2026-04Open access

Unveiling the high lithiophilicity of lithiated hard carbon for lithium metal battery anodes

Ju-yeong Lee, Yong-seok Choi, Jae-won Lee

Abstract

Lithium metal batteries offer high theoretical capacity but suffer from dendrite growth and surface instability. In this study, composite electrodes are prepared by integrating lithium metal powder (LMP) with carbon hosts of varying graphitization degrees, including hard carbon (HC), soft carbon (SC), natural graphite (NG), and artificial graphite (AG). Among them, the LMP/HC electrode exhibits the best electrochemical performance, originating from the defect-rich nature of hard carbon, where abundant dangling-bond-associated sites serve as energetically favorable lithium adsorption and nucleation centers, enabling uniform lithium deposition. The LMP/HC_7DS electrode shows a remarkably low nucleation overpotential of 14.5 mV, compared to 239.0 mV for bare LMP, resulting in a prolonged cycle life of 1000 h versus 350 h for bare LMP in symmetric cells (1 mA/cm 2 , 1 mAh/cm 2 ). In full-cell tests at a 3C rate, LMP/HC_7DS retains 123.4 mAh/g with 98.6% capacity retention at the 1700th cycle, far outperforming bare LMP. While SC outperforms graphite-based hosts overall, it still lags behind HC. These findings demonstrate that lithium associated with defect sites or adsorbed on the surface of amorphous carbon enhances lithiophilicity, suppresses dendrite formation, and significantly improves the long-term stability of lithium metal batteries.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Coordination Chemistry and Organometallics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (66)

Show source-provided references
1. Reviving the lithium metal anode for high-energy batteries10.1038/nnano.2017.16 ↗
2. Toward safe lithium metal anode in rechargeable batteries: a review10.1021/acs.chemrev.7b00115 ↗
3. Dendrite‐suppressed lithium plating from a liquid electrolyte via wetting of Li3N10.1002/aenm.201700732 ↗
4. One-pot solution coating of high quality LiF layer to stabilize Li metal anode10.1016/j.ensm.2018.04.024 ↗
5. Electrolyte additive enabled fast charging and stable cycling lithium metal batteries10.1038/nenergy.2017.12 ↗
6. Lithiophilicity: the key to efficient lithium metal anodes for lithium batteries10.1016/j.jechem.2022.10.026 ↗
7. LiFSI and LiDFBOP dual-salt electrolyte reinforces the solid electrolyte interphase on a lithium metal anode10.1021/acsami.0c08094 ↗
8. Selective deposition and stable encapsulation of lithium through heterogeneous seeded growth10.1038/nenergy.2016.10 ↗
9. A robust all-organic protective layer towards ultrahigh-rate and large-capacity Li metal anodes10.1038/s41565-022-01107-2 ↗
10. Multiscale interfacial stabilization via prelithiation separator engineering for Ah-level anode-free lithium batteries10.1038/s41467-025-59521-8 ↗
11. Developing a one‐pot strategy to synthesize metal–covalent organic frameworks as catalysts for polysulfide conversion and ion calibrators for lithium deposition
12. Lithiophilic‐Gradient, Li+ supplementary interphase design for lean lithium metal batteries10.1002/adma.202420255 ↗
13. Solvating lithium and tethering aluminium using di-coordination-strength anions for low-temperature lithium metal batteries10.1039/D3EE03809B ↗
14. Designing organic–inorganic hybrid materials to construct a complementary interface with versatility for Li–S batteries10.1002/adfm.202410236 ↗
15. A magnetic/force coupling assisted lithium-oxygen battery based on magnetostriction and piezoelectric catalysis of CoFe2O4/BiFeO3 cathode10.1016/j.nanoen.2024.109677 ↗
16. Ultra-long and rapid operating zinc metal batteries enabled by multifunctional polarizable interface stabilizer10.1016/j.cej.2025.167659 ↗
17. Lithiophilic Ag nanoparticle layer on Cu current collector toward stable Li metal anode10.1021/acsami.9b01521 ↗
18. Coralloid carbon fiber-based composite lithium anode for robust lithium metal batteries10.1016/j.joule.2018.02.001 ↗
19. AgNO3-preplanted Li metal powder electrode: preliminary formation of lithiophilic Ag and a Li3N-rich solid electrolyte interphase10.1016/j.cej.2022.139409 ↗
20. Stable lithium metal anode enabled by a lithiophilic and electron/ion conductive framework10.1021/acsnano.9b10083 ↗
21. Lithium silicide surface enrichment: a solution to lithium metal battery10.1002/adma.201801745 ↗
22. Guiding uniform Li plating/stripping through lithium–aluminum alloying medium for long‐life Li metal batteries10.1002/anie.201811955 ↗
23. Porous lithiophilic Li–Si alloy‐type interfacial framework via self‐discharge mechanism for stable lithium metal anode with superior rate
24. Fast‐charging and ultrahigh‐capacity lithium metal anode enabled by surface alloying10.1002/aenm.201902343 ↗
25. 3D lithium metal embedded within lithiophilic porous matrix for stable lithium metal batteries10.1016/j.nanoen.2017.05.015 ↗
26. Robust nanoscale anode protective layers toward fast‐charge high‐energy‐density lithium metal batteries10.1002/adma.202416377 ↗
27. MXene-based polymer brushes decorated with small-sized Ag nanoparticles enabled high-performance lithium host for stable lithium metal battery10.1016/j.carbon.2023.118616 ↗
28. Bimetallic metal-organic frameworks-derived lithiophilic and conductive MnO/Co/C enabled intermittent deposition model for high-performance lithium metal anode10.1016/j.jpowsour.2024.234597 ↗
29. Petaloid bimetallic metal-organic frameworks derived ZnCo2O4/ZnO nanosheets enabled intermittent lithiophilic model for dendrite-free lithium metal anode10.1016/j.jcis.2024.03.081 ↗
30. Is graphite lithiophobic or lithiophilic?10.1093/nsr/nwz222 ↗
31. Lithiophilic LiC6 layers on carbon hosts enabling stable Li metal anode in working batteries10.1002/adma.201807131 ↗
32. Modulating lithium nucleation behavior through ultrathin interfacial layer for superior lithium metal batteries10.1021/acsaem.0c00842 ↗
33. Ultrathin Li-rich Li-Cu alloy anode capped with lithiophilic LiC6 headspace enabling stable cyclic performance10.1016/j.jcis.2023.03.191 ↗
34. Strategy to enhance the cycling stability of the metallic lithium anode in Li-metal batteries10.1021/acs.nanolett.1c00140 ↗
35. Lithium-embedded carbon nanotube/graphite composite anode for lithium metal battery10.1016/j.est.2024.111618 ↗
36. Carbon cloth with lithiophilic carbon-coated ZnO nanotubes as anode current collector for hybrid lithium ion/lithium metal battery10.1016/j.carbon.2024.119452 ↗
37. Lithium–graphite paste: an interface compatible anode for solid‐state batteries
38. Fluorinated graphene as a dual-functional anode to achieve dendrite-free and high-performance lithium metal batteries10.1016/j.carbon.2022.06.023 ↗
39. Lithiophilic 3D nanoporous nitrogen‐doped graphene for dendrite‐free and ultrahigh‐rate lithium‐metal anodes10.1002/adma.201805334 ↗
40. Interconnected hollow carbon nanospheres for stable lithium metal anodes10.1038/nnano.2014.152 ↗
41. Free-standing hollow carbon fibers as high-capacity containers for stable lithium metal anodes10.1016/j.joule.2017.06.004 ↗
42. Vertically grown edge‐rich graphene nanosheets for spatial control of Li nucleation10.1002/aenm.201800564 ↗
43. Correlation between Li plating behavior and surface characteristics of carbon matrix toward stable Li metal anodes10.1002/aenm.201802777 ↗
44. Hard carbon anodes for next‐generation li‐ion batteries: review and perspective10.1002/aenm.202101650 ↗
45. Quasi-metallic lithium encapsulated in the subnanopores of hard carbon for hybrid lithium–ion/lithium metal batteries10.1016/j.cej.2022.138049 ↗
46. A successive intercalation-deposition mechanism induced by hard carbon for hybrid lithium-ion/lithium metal batteries10.1016/j.jechem.2025.01.009 ↗
47. Assessment of the perdew–burke–ernzerhof exchange-correlation functional10.1063/1.478401 ↗
48. Efficient pseudopotentials for plane-wave calculations10.1103/PhysRevB.43.1993 ↗
49. Projector augmented-wave method10.1103/PhysRevB.50.17953 ↗
50. Semiempirical GGA‐type density functional constructed with a long‐range dispersion correction10.1002/jcc.20495 ↗
51. Amorphous (glassy) carbon, a promising material for sodium ion battery anodes: a combined first-principles and experimental study10.1021/acs.jpcc.5b03407 ↗
52. Commentary: the Materials Project: a materials genome approach to accelerating materials innovation10.1063/1.4812323 ↗
53. Bsym: a basic symmetry module10.21105/joss.00370 ↗
54. A universal graph deep learning interatomic potential for the periodic table10.1038/s43588-022-00349-3 ↗
55. First-principle study of C 1s core-level shifts in amorphous carbon10.1016/S0927-0256(01)00167-7 ↗
56. First principles investigation on energetics, structure, and mechanical properties of amorphous carbon films doped with B, N, and Cl10.1038/s41598-019-55488-x ↗
57. On the Berendsen thermostat10.1080/08927029408021981 ↗
58. The success story of graphite as a lithium-ion anode material–fundamentals, remaining challenges, and recent developments including silicon (oxide) composites10.1039/D0SE00175A ↗
59. Revealing the intercalation mechanisms of lithium, sodium, and potassium in hard carbon
60. Investigation of pre-lithiation in graphite and hard-carbon anodes using different lithium source structures10.1149/2.1511714jes ↗
61. Density functional theory calculations of lithium adsorption and insertion to defect-free and defective graphene10.1021/acs.jpcc.6b05458 ↗
62. Kinetically corrected Monte Carlo–molecular dynamics simulations of solid electrolyte interphase growth10.1021/acs.jctc.1c00921 ↗
63. Atomistic modeling of the electrode–electrolyte interface in Li-ion energy storage systems: electrolyte structuring10.1021/jp3102282 ↗
64. The kinetic origin of the Daumas-Hérold model for the Li-ion/graphite intercalation system10.1016/j.elecom.2018.07.004 ↗
65. Li intercalation into graphite: direct optical imaging and cahn–Hilliard reaction dynamics10.1021/acs.jpclett.6b00625 ↗
66. An electron-deficient carbon current collector for anode-free Li-metal batteries10.1038/s41467-021-25848-1 ↗