journal article·2026-04Open access

Laser-induced graphene on axially oriented alginate–tannic acid–clay aerogel for energy harvesting and storage applications

S. Amenta, A. Bisceglie, R. Speranza, S. Martellone, P. Zaccagnini, L. Baudino, J. Gómez-Monterde, L. Marchese, M. Sànchez-Soto, A. Lamberti

Abstract

In this work, a bio-based aerogel with axially oriented morphology was used as a substrate for laser induced graphene (LIG) conversion to fabricate carbon-based electrodes for energy harvesting and storage devices. The substrate materials provide intrinsic flame-retardancy and, together with the anisotropic structure, enable facile and controlled laser writing. The resulting LIG preserves the directional anisotropy of the aerogel, guiding heat propagation. Dye-Sensitized Solar Cells (DSSCs) including the developed material, achieved a fill factor of 0.72 and photoconversion efficiency of 2.2 % under indoor conditions (1000 lux) using γ-valerolactone (GVL) as the electrolyte solvent. Supercapacitors (SCs) were also developed employing LIG electrodes, exhibiting typical electrical double layer capacitor (EDLC) behaviour and remarkable rate capabilities under both cyclic voltammetry and galvanostatic cycling tests, with negligible resistive losses. The areal capacitance reached 1.49 mF/cm 2 , and the Ragone plot showed areal energy and power densities comparable to other sustainable LIG-based SCs. Overall, the aerogel has proven to be a sustainable alternative compatible with laser conversion processes. Remarkably, the aerogel's initial structure is preserved after the laser conversion process, allowing for substrate morphology pre-design to control the final LIG structure. These aerogels' features allow for tailoring carbon-based electrode morphologies toward optimized energy harvesting and storage.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Aerogels and thermal insulation · Solar-Powered Water Purification Methods · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (79)

Show source-provided references
1. Novoselov · 2004 · vol.404
2. 3D graphene materials: from understanding to design and synthesis control10.1021/acs.chemrev.0c00083 ↗
3. Aqueous-phase exfoliation of graphite in the presence of polyvinylpyrrolidone for the production of water-soluble graphenes10.1016/j.ssc.2009.09.018 ↗
4. High-yield production of graphene by liquid-phase exfoliation of graphite10.1038/nnano.2008.215 ↗
5. Chemical methods for the production of graphenes10.1038/nnano.2009.58 ↗
6. Laser-induced graphene: from discovery to translation10.1002/adma.201803621 ↗
7. Design of layered-stacking graphene assemblies as advanced electrodes for supercapacitors10.1016/j.partic.2021.03.001 ↗
8. Fabrication of biomass-derived activated carbon with interconnected hierarchical architecture via H3PO4-assisted KOH activation for high-performance symmetrical supercapacitors10.1016/j.jelechem.2021.115828 ↗
9. Preparation and characterization of porous carbons from PAN-based preoxidized cloth by KOH activation10.1016/j.carbon.2003.10.025 ↗
10. Sustainable green route for activated carbon synthesis from biomass waste for high-performance supercapacitors
11. Towards superior volumetric performance: design and preparation of novel carbon materials for energy storage10.1039/C5EE00389J ↗
12. Rapid and low-cost laser synthesis of hierarchically porous graphene materials as high-performance electrodes for supercapacitors10.1007/s10853-018-03247-0 ↗
13. Laser-induced graphene structures: from synthesis and applications to future prospects10.1016/j.mattod.2023.10.009 ↗
14. Laser-induced porous graphene films from commercial polymers10.1038/ncomms6714 ↗
15. Investigation of micro/nano formation mechanism of porous graphene induced by CO2 laser processing on polyimide film10.1016/j.jmapro.2022.10.037 ↗
16. Driving forces for ultrafast laser-induced sp2 to sp3 structural transformation in graphite10.1038/s41524-023-01035-2 ↗
17. Boosting electric double layer capacitance in laser-induced graphene-based supercapacitors10.1002/adsu.202100228 ↗
18. Recent advances in preparation and application of laser-induced graphene in energy storage devices
19. Laser-induced graphene derived from kraft lignin for flexible supercapacitors10.1021/acsomega.0c01293 ↗
20. Cellulose-based laser-induced graphene devices for electrochemical monitoring of bacterial phenazine production and viability10.1016/j.snb.2022.133090 ↗
21. Graphene-borate as an efficient fire retardant for cellulosic materials with multiple and synergetic modes of action10.1021/acsami.7b00572 ↗
22. Water peel-off transfer of electronically enhanced, paper-based laser-induced graphene for wearable electronics10.1021/acsnano.2c07596 ↗
23. Review of laser-induced graphene (LIG) produced on eco-friendly substrates10.1007/s40684-024-00595-y ↗
24. Laser-induced graphene on cross-linked sodium alginate10.1088/1361-6528/ad143a ↗
25. Green flexible Graphene–inorganic-hybrid micro-supercapacitors made of fallen leaves enabled by ultrafast laser pulses
26. Low flammability, foam-like materials based on ammonium alginate and sodium montmorillonite clay10.1016/j.polymer.2012.10.029 ↗
27. Sustainable wood electronics by iron-catalyzed laser-induced graphitization for large-scale applications10.1038/s41467-022-31283-7 ↗
28. Upgrading renewable natural tannic acid to multifunctional graphene-based materials by direct laser writing10.1016/j.jaap.2024.106927 ↗
29. Cactus-like Ni-Co/CoMn2O4 composites on Ni foam: unveiling the potential for advanced electrochemical materials for pseudocapacitors10.1016/j.mseb.2023.116715 ↗
30. Tailoring porosity in carbon materials for supercapacitor applications10.1039/C3MH00112A ↗
31. Nanoporous carbon aerogels for laser-printed wearable sensors10.1021/acsanm.1c00858 ↗
32. Laser-induced graphene as a sustainable counter electrode for DSSC enabling flexible self-powered integrated harvesting and storage device for indoor application10.1016/j.electacta.2023.142614 ↗
33. A perspective on laser-induced graphene for micro-supercapacitor application10.1063/5.0078707 ↗
34. Radially and axially oriented ammonium alginate aerogels modified with clay/tannic acid and crosslinked with glutaraldehyde10.3390/gels10080526 ↗
35. Quantitative analysis of raman spectral parameters for carbon fibers: practical considerations and connection to mechanical properties10.1007/s10853-021-06225-1 ↗
36. Raman spectroscopy of thermally perturbed carbon fibers: discriminating spectral responses of modulus classes and defect types
37. The importance of interbands on the interpretation of the raman spectrum of graphene oxide10.1021/acs.jpcc.5b01590 ↗
38. Evolution of the raman spectrum with the chemical composition of graphene oxide10.1021/acs.jpcc.7b06236 ↗
39. Raman microspectroscopy of soot and related carbonaceous materials: spectral analysis and structural information10.1016/j.carbon.2005.02.018 ↗
40. Systematic and collaborative approach to problem solving using X-ray photoelectron spectroscopy10.1016/j.apsadv.2021.100112 ↗
41. On the use of activated carbon as a quasi-reference electrode in non-aqueous electrolyte solutions10.1016/j.jelechem.2009.09.007 ↗
42. Infrared investigation of organo-montmorillonites prepared from different surfactants10.1016/j.saa.2010.02.038 ↗
43. Fourier transform Mid-Infrared (FTIR) spectroscopy to identify tannin compounds in the panicle of sorghum mutant lines
44. Hydrogen bond-regulated rapid prototyping and performance optimization of polyvinyl alcohol–tannic acid hydrogels10.3390/gels11080602 ↗
45. Bioactive edible sodium alginate films incorporated with tannic acid as antimicrobial and antioxidative food packaging
46. Development of sodium alginate/glycerol/tannic acid coated cotton as antimicrobial system10.1016/j.ijbiomac.2022.06.168 ↗
47. Spectroscopic and thermal studies of bentonites from Ünye, Turkey10.1016/j.molstruc.2010.02.008 ↗
48. High-resolution laser-induced graphene. Flexible electronics beyond the visible limit10.1021/acsami.0c01377 ↗
49. Laser-induced graphenization of PDMS as flexible electrode for microsupercapacitors10.1002/admi.202101046 ↗
50. Physisorption of gases, with special reference to the evaluation of surface area and pore size distribution (IUPAC technical report)10.1515/pac-2014-1117 ↗
51. Raman spectroscopy as a versatile tool for studying the properties of graphene10.1038/nnano.2013.46 ↗
52. Laser-induced graphene microsupercapacitors: structure, quality, and performance10.3390/nano13050788 ↗
53. Raman spectroscopy of graphene-based materials and its applications in related devices10.1039/C6CS00915H ↗
54. Degradable alginate hydrogels crosslinked by the macromolecular crosslinker alginate dialdehyde10.1039/c2jm30564j ↗
55. Tannic acid coated single-wall carbon nanotube membranes for the recovery of Au from trace-level solutions10.1007/s12274-023-5803-y ↗
56. Sustainable metal-phenolic hybrid adsorbent: double-Crosslinked alginate/carboxymethyl cellulose for effective ammonium ion capture10.1016/j.ijbiomac.2025.148347 ↗
57. Accessing the robustness of adventitious carbon for charge referencing (correction) purposes in XPS analysis: insights from a multi-user facility data review10.1016/j.apsusc.2022.153681 ↗
58. Pouch-sealing as an effective way to fabricate flexible dye-sensitized solar cells and their integration with supercapacitors10.1016/j.jpowsour.2023.233581 ↗
59. Experimental and modeling study for the solar-driven CO2 electrochemical reduction to CO10.3390/app15020549 ↗
60. Boosting the performance of monolithic dye-sensitized solar cells under simulated solar and artificial light10.1021/acsaem.5c01192 ↗
61. Harnessing γ-Valerolactone: green and low-toxic solvent for enhanced dye-sensitized solar cells performance under indoor lighting10.1002/aesr.202400370 ↗
62. Counter electrodes in dye-sensitized solar cells10.1039/C6CS00752J ↗
63. Economical Pt-free catalysts for counter electrodes of dye-sensitized solar cells10.1021/ja209657v ↗
64. PEDOT-graphene counter-electrode for solar and improved artificial light conversion in regular, bifacial and FTO-less cobalt mediated DSSCs10.1016/j.electacta.2022.140140 ↗
65. Liquid electrolytes for dye-sensitized solar cells10.1039/c1dt11023c ↗
66. Influence of electrolyte in transport and recombination in dye-sensitized solar cells studied by impedance spectroscopy10.1016/j.solmat.2004.07.017 ↗
67. Enhanced performance of dye-sensitized solar cells with activated carbons10.1166/jnn.2013.8115 ↗
68. Increased power conversion efficiency of dye-sensitized solar cells with counter electrodes based on carbon materials10.1039/C9RA03344K ↗
69. Preparation of a hierarchical porous activated carbon derived from cantaloupe peel/fly ash/PEDOT:PSS composites as Pt-free counter electrodes of dye-sensitized solar cells10.1016/j.heliyon.2024.e29957 ↗
70. Fabrication of a counter electrode for dye-sensitized solar cells (DSSCs) using a carbon material produced with the organic ligand 2-methyl-8-hydroxyquinolinol (Mq)10.1039/C9NA00206E ↗
71. Laser-induced graphitization (LIG) of a mediterranean cultivation softwood: does anisotropy matter?10.1016/j.materresbull.2025.113460 ↗
72. Liu · 2024 · vol. 384
73. Andrea Lamberti · 2024
74. Cycling stability of a hybrid activated carbon//poly(3-methylthiophene) supercapacitor with N-butyl-N-methylpyrrolidinium bis(trifluoromethanesulfonyl) imide ionic liquid as electrolyte10.1016/j.electacta.2004.10.006 ↗
75. Electrochemical impedance spectroscopy─a tutorial10.1021/acsmeasuresciau.2c00070 ↗
76. Strategies to reduce the resistance sources on electrochemical double layer capacitor electrodes10.1016/j.jpowsour.2013.04.031 ↗
77. Laser-induced graphene formation on wood10.1002/adma.201702211 ↗
78. Cork derived laser-induced graphene for sustainable green electronics10.1088/2058-8585/ac8e7b ↗
79. Paper-based laser-induced graphene for sustainable and flexible microsupercapacitor applications10.1007/s00604-022-05610-0 ↗