journal article·2026-04Open access

Trace vanadium doping triggers the additional oxygen vacancies in the oxygen electrode of solid oxide cells

Weifeng Chen, Zhaohui Cai, Xiaoyu Wang, Dongfei Li, Wenhuai Li, Dongliang Liu, Wanqing Chen, Chuan Zhou, Wei Zhou

Abstract

Under the intermediate-to-low temperature conditions, the operational efficiency of solid oxide cells (SOCs) is considerably constrained by sluggish kinetics of the oxygen electrode reaction, particularly with respect to the bulk oxygen transport. To address this challenge, a trace introduction of high-valent vanadium ions at the B-site is carried out, which generates the additional bulk oxygen vacancies, thereby enhancing the oxygen ion transport pathways in the electrode. As a result, SrCo 0.7 Fe 0.275 V 0.025 O 3-δ (SCFV 0.025 ) demonstrates accelerated oxygen ion transport kinetics, which can be attributed to the reduced formation energy of bulk oxygen vacancies. It achieves an area-specific resistance of just 0.021 Ω cm 2 at 650 °C, as well as a peak power density of 1.3 W cm −2 and an electrolysis current density of −1.1 A cm −2 at 1.3 V for button cell. In addition, the large-area single cell exhibits the high power of 32.7 W and the electrolysis current of 58.5 A at 750 °C. The effective strategy reports in this work provides a novel perspective for improving oxygen electrodes for SOCs.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Chemical Looping and Thermochemical Processes · Electrocatalysts for Energy Conversion

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Recent advances in solid oxide cell technology for electrolysis10.1126/science.aba6118 ↗
2. Switching on electrocatalytic activity in solid oxide cells10.1038/nature19090 ↗
3. Advances in advanced in situ assembled composite electrode materials for enhanced solid oxide cell performance10.1002/adfm.202405851 ↗
4. Solid-state electrochemistry and solid oxide fuel cells: status and future prospects10.1007/s41918-022-00160-8 ↗
5. A review on recent progress and selection of cobalt-based cathode materials for low temperature-solid oxide fuel cells
6. Electrocatalysis in solid oxide fuel cells and electrolyzers10.1021/acs.chemrev.4c00008 ↗
7. Oxide perovskites, double perovskites and derivatives for electrocatalysis, photocatalysis, and photovoltaics10.1039/C8EE01574K ↗
8. The regulation mechanism of oxygen vacancies in Ruddlesden–Popper perovskite Ln2NiO4 (Ln= La, Pr, Nd) air electrode for reversible protonic solid oxide cells
9. Designing the next generation of proton-exchange membrane fuel cells10.1038/s41586-021-03482-7 ↗
10. Using a vapor-fed anode and saline catholyte to manage ion transport in a proton exchange membrane electrolyzer10.1039/D1EE02265B ↗
11. Hydrogen generation with acid/alkaline amphoteric water electrolysis10.1016/j.jechem.2018.12.022 ↗
12. Cobalt-substituted SrTi0.3Fe0.7O3−δ: a stable high-performance oxygen electrode material for intermediate-temperature solid oxide electrochemical cells10.1039/C8EE00449H ↗
13. High cationic dispersity boosted oxygen reduction reactivity in multi‐element doped perovskites10.1002/adfm.202210496 ↗
14. Temperature-induced relaxation for determining oxygen transport kinetics of nonstoichiometric oxides: fundamentals and experiments10.1039/D5TA00598A ↗
15. Co-expression of multi-genes for polynary perovskite electrocatalysts for reversible solid oxide cells10.1038/s41467-025-58178-7 ↗
16. A high-performance cathode for the next generation of solid-oxide fuel cells10.1038/nature02863 ↗
17. Prediction of perovskite oxygen vacancies for oxygen electrocatalysis at different temperatures10.1038/s41467-024-53578-7 ↗
18. Computational design and experimental validation of the optimal bimetal-doped SrCoO3−δ perovskite as solid oxide fuel cell cathode10.1021/jacs.1c03441 ↗
19. A niobium and tantalum co-doped perovskite cathode for solid oxide fuel cells operating below 500° C
20. P-substituted Ba0.95La0.05FeO3−δ as a cathode material for SOFCs10.1021/acsaem.9b00624 ↗
21. Topological ion optimized composite cathode for proton‐conducting solid oxide fuel cells10.1002/adfm.202501995 ↗
22. Decoupling analysis for advanced electrochemical ceramic oxygen pumps
23. Er-doping enhances the oxygen evolution performance of cobalt oxide in acidic medium10.1021/acscatal.4c03088 ↗
24. A durable and highly active oxygen electrode for solid oxide cells: new insight into segregation suppression of layered perovskite10.1002/adma.202502068 ↗
25. Hydration-induced stiffness enabling robust thermal cycling of high temperature fuel cells cathode10.1038/s41467-025-57611-1 ↗
26. Conductivity and stability of SrVO3 and mixed perovskites at low oxygen partial pressures10.1016/S0167-2738(01)00870-0 ↗
27. Optimizing surface electronic structure by Ba dispersion for enhanced high-temperature oxygen evolution reaction activity10.1021/jacs.5c03987 ↗
28. An efficient electrocatalyst as cathode material for solid oxide fuel cells: BaFe0.95Sn0.05O3−δ10.1016/j.jpowsour.2016.07.023 ↗
29. Electrochemical performance of cobalt‐free Nb and Ta co‐doped perovskite cathodes for intermediate‐temperature solid oxide fuel cells10.1002/celc.201700236 ↗
30. Cobalt-free fluorine doped Bi0.7Sr0.3FeO3-δ oxides for energetic cathodes of low-temperature solid oxide fuel cells10.1016/j.cej.2022.139584 ↗
31. An efficient and robust lanthanum strontium cobalt ferrite catalyst as a bifunctional oxygen electrode for reversible solid oxide cells10.1039/D0TA11233J ↗
32. B-site nickel tuned high active Sr and Co-free Ba0.8Ca0.2Fe0.8Ni0.2O3-δ air electrode for reversible solid oxide cells
33. La1-xCaxFeO3-δ air electrode fabricated by glycine-nitrate combustion method for solid oxide electrolysis cell10.1016/j.ceramint.2021.08.127 ↗
34. Cobalt-free perovskite Ba1-xNdxFeO3-δ air electrode materials for reversible solid oxide cells10.1016/j.ceramint.2020.11.149 ↗
35. High‐performing Perovskite/Ruddlesden‐Popper fuel electrode for high‐temperature steam electrolysis10.1002/aenm.202404843 ↗
36. Self‐assembled perovskite nanocomposite with beneficial lattice tensile strain as high active and durable cathode for low temperature solid oxide fuel cell10.1002/adfm.202310790 ↗
37. Realizing B-site high-entropy air electrode for superior reversible solid oxide cells
38. Highly active and stable oxygen electrode PrBaCo2O5+δ-Ba2CoWO6 enabled by in situ formed misfit dislocation interface for reversible solid oxide cell
39. Heterostructured simple perovskite nanorod-decorated double perovskite cathode for solid oxide fuel cells: highly catalytic activity, stability and CO2-durability for oxygen reduction reaction10.1016/j.apcatb.2019.02.056 ↗
40. A highly active and durable iron-based high-entropy perovskite cathode for solid oxide fuel cells10.1016/j.jechem.2025.07.019 ↗
41. B-site La, Ce, and Pr-doped Ba0.5Sr0.5Co0.7Fe0.3O3-δ perovskite cathodes for intermediate-temperature solid oxide fuel cells: effectively promoted oxygen reduction activity and operating stability10.1016/j.jpowsour.2021.229778 ↗
42. Highly active and stable Er0.4Bi1.6O3 decorated La0.76Sr0.19MnO3+δ nanostructured oxygen electrodes for reversible solid oxide cells10.1039/C7TA02950K ↗
43. Regulating the dp orbital hybridization in BaCo0.4Fe0.4Zr0.1Y0.1O3-δ via Cu doping for high-performance solid oxide fuel cells cathode