journal article·2026-04Open access

Hydrogen production by hydrolysis of ball milled and cold rolled activated magnesium wastes: case of MSR alloy wastes in NaCl solution

Victor Raud, Maria Moussa, Serge Al Bacha, Jean-Louis Bobet

Abstract

This study investigates the hydrolysis of MSR waste alloys, activated by ball milling and cold rolling, to produce hydrogen. MSR, a magnesium alloy with 2.4% Ag, 2.5% Nd, and 0.4% Zr, is used in applications requiring corrosion or mechanical resistance. The effects of feedstock type (powder vs. chips) and mechanical pre-treatments (ball milling, cold rolling) on hydrogen yield and hydrolysis mechanisms were analyzed through SEM and XRD. Mechanical treatments reduced crystallite size from 183 nm (powder) and 180 nm (chips) to 112 nm and 153 nm, respectively. Powder feedstock, cold rolled 10 times and ball milled for 3 hours, achieved an 89% hydrogen yield after 10 minutes (min) in NaCl solution, with fast kinetics due to defects introduced by the treatments. In contrast, chips with the same pre-treatment yielded 79% after 30 min. Cold rolling alone led to a 20% yield after 30 min. These findings suggest that various industrial waste feedstocks can be used for low-cost, scalable hydrogen production via hydrolysis with simple mechanical treatments.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Hydrogen Storage and Materials · Bauxite Residue and Utilization · Magnesium Alloys: Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. A comprehensive review of the promising clean energy carrier: hydrogen production, transportation, storage, and utilization (HPTSU) technologies10.1016/j.fuel.2023.129455 ↗
2. Hydrogen - a sustainable energy carrier10.1016/j.pnsc.2016.12.014 ↗
3. Hydrogen production by PEM water electrolysis – a review
4. A review of hydrogen usage in internal combustion engines (Gasoline-Lpg-Diesel) from combustion performance aspect10.1016/j.ijhydene.2020.02.001 ↗
5. A mini review for hydrogen production routes toward carbon neutrality10.1007/s44270-024-00004-4 ↗
6. Local high concentration Alkali field accelerated silicon hydrolysis for hydrogen production
7. Recent progress of mechanically activated Mg-Based materials to promote hydrogen generation via hydrolysis10.1016/j.fuel.2025.134783 ↗
8. Hydrogen production by reaction of aluminum with water10.1016/j.ijhydene.2016.05.159 ↗
9. Enhanced hydrogen generation from hydrolysis of MgLi doped with expanded graphite10.1016/j.jma.2021.02.008 ↗
10. Enhancement of the H2 desorption properties of LiAlH4 doping with NiCo2O4 nanorods10.1016/j.ijhydene.2013.12.210 ↗
11. Hydrolysis of Mg-Based alloys and their hydrides for efficient hydrogen generation10.1016/j.ijhydene.2021.03.063 ↗
12. A review on hydrogen generation from the hydrolysis of sodium borohydride10.1016/j.ijhydene.2020.09.186 ↗
13. Advancements and challenges in sodium borohydride hydrogen storage: a comprehensive review of hydrolysis, regeneration, and recycling technologies10.1063/5.0242699 ↗
14. Hydrogen generation and stoichiometric hydrolysis of core–shell Al-Li-NaBH4 composite10.1016/j.jallcom.2022.168638 ↗
15. Achieving a novel solvent-free regeneration of LiBH4 combining hydrogen storage and production in a closed material cycle10.1016/j.jma.2021.08.005 ↗
16. Closing the loop for hydrogen storage: facile regeneration of NaBH4 from its hydrolytic product10.1002/anie.201915988 ↗
17. Advanced Mg-Based materials for energy storage: fundamental, progresses, challenges and perspectives10.1016/j.pmatsci.2024.101381 ↗
18. Challenges and breakthroughs of Mg-Based materials for hydrogen generation by hydrolysis10.1016/j.ijhydene.2025.01.392 ↗
19. Hydrogen generation from waste Mg based material in various saline solutions (NiCl2, CoCl2, CuCl2, FeCl3, MnCl2)10.1016/j.ijhydene.2015.01.022 ↗
20. Synthesis of highly dispersed magnesium hydroxide and its application in flame-retardant EVA composites10.1039/D5RA01067E ↗
21. Recent development in the environmental application of nano-sized MgO10.1007/s12034-022-02767-5 ↗
22. MgO-C refractories: a detailed review of these irreplaceable refractories in steelmaking10.1007/s42411-021-0457-9 ↗
23. Evaluation of hydrogen yield by hydrolysis from waste magnesium based materials catalysed by stainless steel net in iron chloride solution
24. Hydrogen production from hydrolysis of magnesium wastes reprocessed by mechanical milling under air10.1016/j.ijhydene.2021.11.181 ↗
25. Hydrolysis H2 generation behavior of AM50 alloy waste coactivated by Mg-Based master alloys10.1016/j.ijhydene.2022.07.068 ↗
26. Effect of ball milling strategy (milling device for scaling-up) on the hydrolysis performance of Mg alloy waste10.1016/j.ijhydene.2020.05.214 ↗
27. Effect of carbons (G and CFs), TM (Ni, Fe and Al) and oxides (Nb2O5 and V2O5) on hydrogen generation from ball milled Mg-Based hydrolysis reaction for fuel cell10.1016/j.energy.2015.12.004 ↗
28. Hydrogen generation from Mg wastes by cold rolling and ball milling by hydrolysis reaction: Elektron 21 (UNS-M12310) in simulated seawater10.3390/met12111821 ↗
29. Study of corrosion behavior of Mg–Gd-Based Soluble Magnesium alloys
30. Weldability of the MSRB magnesium alloy10.4028/www.scientific.net/SSP.176.107 ↗
31. Progress and prospects in magnesium alloy scrap recycling10.1016/j.jma.2024.11.031 ↗
32. Cleaner production techniques in magnesium alloy recycling: optimizing processes for environmental sustainability10.1016/j.jallcom.2025.180083 ↗
33. Role of carbon-based materials to promote the hydrolysis performance of magnesium-based materials10.1016/j.rser.2025.115864 ↗
34. Effect of cold rolling on aging precipitation and mechanical properties of magnesium-aluminum alloy10.1016/j.jma.2023.06.015 ↗
35. Effect of cold rolling on magnesium-based metal hydrides10.2320/matertrans.MT-MF2022058 ↗
36. Effect of ball milling on the corrosion resistance of magnesium in aqueous media10.1016/j.electacta.2004.02.001 ↗
37. Effect of ball size on steady State of aluminum powder and efficiency of impacts during milling10.1016/j.powtec.2015.06.035 ↗
38. Hydrogen evolution during the corrosion of galvanically coupled magnesium10.1149/2.0711603jes ↗
39. Galvanic corrosion behavior of AZ31 Mg alloy coupled with mild steel: effect of coatings10.1016/j.jmrt.2023.05.077 ↗
40. Grain boundary energy anisotropy: a review10.1007/s10853-011-5677-3 ↗
41. Mubasher. The catalytic role of cubic iron oxide coated graphene oxide for hydrogen generation via hydrolysis of magnesium10.1016/j.renene.2025.124515 ↗
42. Method of comparing solid‐state kinetic data and its application to the decomposition of Kaolinite, brucite, and BaCO310.1111/j.1151-2916.1972.tb11213.x ↗
43. Modeling hydrolysis kinetics of dual phase α-Mg/LPSO alloys10.1016/j.ijhydene.2022.05.001 ↗
44. Effect of ball milling and cold rolling on hydrogen storage properties of Nanocrystalline TiV1.6Mn0.4 alloy10.1016/j.jallcom.2009.05.037 ↗