Rare-earth- and cobalt-free Ruddlesden-Popper phases Sr3Fe2-xNixO7-δ (x = 0, 1) as air electrodes for reversible solid oxide cells
Source abstract
Abstract
The development of cobalt- and rare-earth-free air electrodes is essential to improve the sustainability, cost, and scalability of reversible solid oxide cells (rSOCs). Here, the n = 2 Ruddlesden–Popper oxides Sr 3 Fe 2 O 7–δ (SF) and Sr 3 FeNiO 7–δ (SFN) are investigated in the first systematic study linking structure, defect chemistry, transport properties, and cell performance of this ferrite-based RP family for reversible operation. Nickel substitution significantly modifies oxygen non-stoichiometry and redox behaviour, producing a fourfold increase in total electrical conductivity for SFN compared to SF, reaching ∼200 S cm −1 in O 2 at 350 °C. Impedance spectroscopy demonstrates that performance is governed by a composition-dependent balance between electronic and ionic transport in RP–CGO composites. Optimal polarisation resistance is obtained at 50:50 wt% SF:CGO (0.24 and 0.06 Ω cm 2 at 700 and 800 °C, respectively) and at higher CGO fractions for SFN (30:70 wt%, 0.30 and 0.10 Ω cm 2 at 700 and 800 °C). These trends are reflected in single-cell tests, yielding peak power densities of ∼455 and 360 mW cm −2 at 800 °C for SF- and SFN-based electrodes, respectively. Confocal Raman microscopy is employed as a diagnostic tool to resolve interfacial and compositional evolution before and after operation, revealing distinct phase and vacancy redistribution mechanisms. • Cobalt- and rare-earth-free Ruddlesden–Popper ferrites as air electrodes for rSOCs. • Ni substitution enhances conductivity but limits electrochemical performance. • Confocal Raman reveals electrode–electrolyte interfacial evolution after operation.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Iron oxide chemistry and applications · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (91)
Show source-provided references
1. United Nations General Assembly, Resolution Adopted by the General As- Sembly on 25 September 2015, 70/1. Transforming Our World: the 2030 Agenda for Sustainable Development., (n.d.).
2. Perspective on the hydrogen economy as a pathway to reach net-zero CO2 emissions in Europe10.1039/D1EE02118D ↗
3. Integration of renewable energy sources in tandem with electrolysis: a technology review for green hydrogen production10.1016/j.ijhydene.2024.06.342 ↗
4. Water electrolysis toward elevated temperature: advances, challenges and frontiers10.1021/acs.chemrev.2c00573 ↗
5. Recent advances in high temperature electrolysis using solid oxide fuel cells: a review10.1016/j.jpowsour.2011.12.019 ↗
6. Recent advances in solid oxide cell technology for electrolysis10.1126/science.aba6118 ↗
7. Highly efficient high temperature electrolysis10.1039/b718822f ↗
8. Optimization strategies for Solid Oxide Fuel Cell (SOFC) application: a literature survey10.1016/j.rser.2017.03.052 ↗
9. Achievements and trends of solid oxide fuel cells in clean energy field: a perspective review10.1007/s11708-018-0546-2 ↗
10. Solid oxide fuel cell: decade of progress, future perspectives and challenges10.1016/j.ijhydene.2021.06.020 ↗
11. Reversible solid oxide systems for energy and chemical applications – review & perspectives10.1016/j.est.2019.100782 ↗
12. Materials for reversible solid oxide cells10.1016/j.coelec.2020.03.014 ↗
13. Intermediate temperature solid oxide fuel cells10.1039/b612060c ↗
14. Factors governing oxygen reduction in solid oxide fuel cell cathodes10.1021/cr020724o ↗
15. Oxygen diffusion in solid oxide fuel cell cathode and electrolyte materials: mechanistic insights from atomistic simulations10.1039/c0ee00717j ↗
16. A perspective on low-temperature solid oxide fuel cells10.1039/C5EE03858H ↗
17. Chemical design of oxygen electrodes for solid oxide electrochemical cells: a guide
18. Review on recent advancement in cathode material for lower and intermediate temperature solid oxide fuel cells application10.1016/j.ijhydene.2021.10.094 ↗
19. Perspectives on cathodes for protonic ceramic fuel cells10.3390/app11125363 ↗
20. Cobalt-free perovskite cathode materials SrFe1-xTixO3-δ and performance optimization for intermediate-temperature solid oxide fuel cells10.1016/j.electacta.2014.01.020 ↗
21. Cobalt-free SrNbxFe1-xO3-δ (x = 0.05, 0.1 and 0.2) perovskite cathodes for intermediate temperature solid oxide fuel cells10.1016/j.jpowsour.2015.08.063 ↗
22. Symmetric electrodes for solid oxide fuel cells based on Zr-doped SrFeO3-δ10.1016/j.jpowsour.2015.01.043 ↗
23. Ti-doped SrFeO3 nanostructured electrodes for symmetric solid oxide fuel cells10.1039/C5RA23771H ↗
24. A-site cation deficient SrTa0.1Fe0.9O3-δ as a bi-functional cathode for both oxygen ion-and proton-conducting solid oxide fuel cells10.1016/j.ceramint.2024.06.160 ↗
25. Electrical and electrochemical properties of the Sr(Fe,Co,Mo)O3−δ system as air electrode for reversible solid oxide cells10.1016/j.jpowsour.2019.226895 ↗
26. Optimisation of electrochemical performance of Sr (Fe,Sb)O3-δ air electrodes for intermediate-temperature solid oxide cells through spray-pyrolysis processing10.1016/j.jpowsour.2024.234243 ↗
27. Optimisation of high-performance, cobalt-free SrFe1-xMoxO3-δ cathodes for solid oxide fuel cells prepared by spray pyrolysis10.1016/j.renene.2021.12.121 ↗
28. Enhancement of electrochemical performance of SrFe0.5Co0.5O3-δ as air electrode for intermediate temperature solid oxide cells via Sb and Mo doping10.1016/j.ceramint.2023.08.330 ↗
29. The crystal struture of a-Sr3Fe2O7-x10.1107/S0567740873006692 ↗
30. Structure and oxygen stoichiometry in Sr3Fe2O7-y, 0 ≤ y ≤ 1.010.1016/0022-4596(92)90023-O ↗
31. Phase equilibria in the pseudo-binary system SrO-Fe2O310.1016/j.jssc.2004.05.007 ↗
32. Ruddlesden-Popper phase materials for solid oxide fuel cell cathodes: a short review10.1016/j.matpr.2021.12.537 ↗
33. Controlling oxygen mobility in ruddlesden-popper oxides10.3390/ma10040368 ↗
34. Electrical transport properties and defect structure of SrFeCo0.5Ox10.1149/1.1836709 ↗
35. LaSr3Fe3-yCoyO10-δ (0 ≤ y ≤ 1.5) Intergrowth oxide cathodes for intermediate temperature solid oxide fuel cells10.1021/cm052645+ ↗
36. Order-disorder enhanced oxygen conductivity and electron transport in Ruddlesden-Popper ferrite-titanate Sr3Fe2-xTixO6+δ10.1006/jssc.2002.9722 ↗
37. High temperature properties of the n = 2 Ruddlesden-Popper phases (La,Sr)3(Fe,Ni)2O7-δ10.1016/j.ssi.2006.03.050 ↗
38. Defect structure and electrical conductivity of the ruddlesden-popper phases Sr3FeMO6+δ (M = Co, Ni)10.1021/cm0604007 ↗
39. High-Performanced cathode with a two-layered R-P structure for intermediate temperature solid oxide fuel cells10.1021/acsami.5b10844 ↗
40. Effect of Zn doping on Sr3Fe2O7-δ Ruddlesden-Popper oxides as active and robust cathodes for protonic ceramic fuel cells10.1016/j.ijhydene.2023.07.313 ↗
41. An effective strategy to enhance the electrocatalytic activity of ruddlesden−popper oxides Sr3Fe2O7−δ electrodes for solid oxide fuel cells10.3390/catal11111400 ↗
42. New two-layer Ruddlesden—Popper cathode materials for protonic ceramics fuel cells10.1007/s40145-021-0488-8 ↗
43. Rational design of ruddlesden–popper perovskite ferrites as air electrode for highly active and durable reversible protonic ceramic cells10.1007/s40820-024-01397-2 ↗
44. Engineering synergistic oxygen-proton properties for high-performance reversible protonic ceramic cell air electrodes10.1002/smsc.202500256 ↗
45. Boosting electrocatalytic performance of Ruddlesden-Popper type Fe-based cathode catalysts by La and Ni co-doping for solid oxide fuel cells10.1016/j.ijhydene.2022.05.103 ↗
46. Recent advances in magnetic structure determination by neutron powder diffraction10.1016/0921-4526(93)90108-I ↗
47. Beyond conventional characterization: defect engineering role for sensitivity and selectivity of room-temperature UV-assisted graphene-based NO2 sensors10.1016/j.talanta.2024.127507 ↗
48. Enhanced intermediate-temperature electrochemical performance of air electrodes for solid oxide cells with spray-pyrolyzed active layers10.1021/acsami.9b22966 ↗
49. Structure, electrical conductivity and oxygen transport properties of Ruddlesden-Popper phases Lnn+1NinO3n+1(Ln = La, Pr and Nd; n = 1, 2 and 3)10.1039/D0TA06731H ↗
50. In situ determination of the nickel oxidation state in La2NiO4+δ and La4Ni3O10-δ using X-ray absorption near-edge structure10.1039/c1jm14320d ↗
51. Magnetic excitations in Ndn+1NinO3n+1 Ruddlesden-Popper nickelates observed via resonant inelastic x-ray scattering10.1103/PhysRevB.111.165145 ↗
52. A structural study of Ruddlesden-popper phases Sr3-xYx(Fe1.25Ni0.75)O7-δ with x ≤ 0.75 by neutron powder diffraction and EXAFS/XANES spectroscopy10.1039/C7TA07113B ↗
53. Crystal structure and high-temperature properties of the Ruddlesden-Popper phases Sr3-xYx(Fe1.25Ni0.75)O7-δ (0≤x≤0.75)10.1016/j.jssc.2015.03.018 ↗
54. Synthesis, crystal chemistry and physical properties of the Ruddlesden-Popper phases Sr3Fe2-xNixO7-δ (0≤x≤1.0)10.1016/j.jssc.2005.02.018 ↗
55. Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenides10.1107/S0567739476001551 ↗
56. A-site-cation deficiency in the SrCe0.9Yb0.1O3−δ perovskite: effects of charge-compensation mechanism on structure and proton conductivity10.1039/c0jm04464d ↗
57. Study of structural, electrical, and electrochemical properties of Sr3-xPrxFe1.8Co0.2O7-δ cathode for IT-SOFCs10.1016/j.ssi.2023.116421 ↗
58. Oxygen nonstoichiometry, chemical expansion, mixed conductivity, and anodic behavior of Mo-substituted Sr3Fe2O7-δ10.1016/j.ssi.2010.06.004 ↗
59. Neutron powder diffraction study at high temperature of the Ruddlesden-Popper phase Sr3Fe2O6+δ10.1016/j.ssi.2006.11.014 ↗
60. Study of the crystal chemistry of the n = 2 ruddlesden-popper phases Sr3FeMO6+δ (M = Fe, Co, and Ni) using in situ high temperature neutron powder diffraction10.1021/cm900643e ↗
61. Relationship between cation substitution and stability of perovskite structure in SrCoO3-δ-based mixed conductors10.1016/j.ssi.2006.10.022 ↗
62. Thermal and chemical induced expansion of La0.3Sr0.7(Fe,Ga)O3-δ ceramics10.1016/S0955-2219(02)00308-4 ↗
63. Characterization of NdSrCo1-xFexO4+δ (0 ≤ x ≤ 1.0) intergrowth oxide cathode materials for intermediate temperature solid oxide fuel cells10.1016/j.ceramint.2010.10.004 ↗
64. Controllable synthesis of SrCO3 with different morphologies and their co-catalytic activities for photocatalytic oxidation of hydrocarbon gases over TiO210.1007/s10853-017-0748-8 ↗
65. A linear free energy relationship for gas-solid interactions: correlation between surface rate constant and diffusion coefficient of oxygen tracer exchange for electron-rich perovskites10.1002/anie.200460081 ↗
66. How is oxygen incorporated into oxides? A comprehensive kinetic study of a simple solid-state reaction with SrTiO3 as a model material10.1002/anie.200700987 ↗
67. Electrochemical investigation of mixed ionic/electronic cathodes for SOFCs10.1016/j.ssi.2005.04.027 ↗
68. High-performance lanthanum-ferrite-based cathode for SOFC10.1016/j.ssi.2004.09.007 ↗
69. Ceria interlayer-free Ba0.5Sr0.5Co0.8Fe0.2O3-δ-Sc0.1Zr0.9O1.95 composite cathode on zirconia based electrolyte for intermediate temperature solid oxide fuel cells10.1016/j.ijhydene.2013.05.048 ↗
70. La0.8Sr1.2CoO4+δ-CGO composite as cathode on La0.9Sr0.1Ga0.8Mg0.2O3-δ electrolyte for intermediate temperature solid oxide fuel cells10.1016/j.jpowsour.2012.11.110 ↗
71. Cobalt-free cathode material SrFe0.9Nb0.1O3-δ for intermediate-temperature solid oxide fuel cells10.1016/j.elecom.2009.12.016 ↗
72. High performance cobalt-free Cu1.4Mn1.6O4 spinel oxide as an intermediate temperature solid oxide fuel cell cathode10.1016/j.jpowsour.2016.03.046 ↗
73. Ni-doped BaFeO3−δ perovskite oxide as highly active cathode electrocatalyst for intermediate-temperature solid oxide fuel cells10.1016/j.electacta.2018.09.096 ↗
74. Electrochemical performance of novel cobalt-free oxide Ba0.5Sr0.5Fe0.8Cu0.2O3-δ for solid oxide fuel cell cathode10.1016/j.jpowsour.2009.09.078 ↗
75. Electrode properties of Cu-doped Bi0.5Sr0.5FeO3−δ cobalt-free perovskite as cathode for intermediate-temperature solid oxide fuel cells10.1016/j.jallcom.2017.01.026 ↗
76. Zr doped BaFeO3-δ as a robust electrode for symmetrical solid oxide fuel cells10.1016/j.ijhydene.2019.10.091 ↗
77. Electronic conduction of Yttria-Stabilized Zirconia electrolyte in solid oxide cells operated in high temperature water electrolysis10.1149/1.3138701 ↗
78. Generation of defective few-layered graphene mesostructures by high-energy ball milling and their combination with FeSiCuNbB microwires for reinforcing microwave absorbing properties10.1021/acsami.2c19886 ↗
79. Real-time monitoring of stress development during electrochemical cycling of electrode materials for Li-ion batteries: overview and perspectives10.1039/C9TA06474E ↗
80. Raman spectroscopy as a powerful tool to characterize ceria-based catalysts10.1016/j.cattod.2020.03.044 ↗
81. Thermodynamic assessment of Gd-doped CeO2 for microwave-assisted thermochemical reduction10.1039/D4TA05804F ↗
82. Novel Mn–Cu-Containing CeO2 nanopolyhedra for the oxidation of CO and diesel soot: effect of dopants on the nanostructure and catalytic activity10.1007/s10562-017-2226-y ↗
83. Fast and continuous obtaining of Eu3+ doped CeO2 microspheres by ultrasonic spray pyrolysis: characterization and photocatalytic activity10.1007/s10854-019-01506-7 ↗
84. Effects of Ni loading on the physicochemical properties of NiO: X/CeO2 catalysts and catalytic activity for NO reduction by CO10.1039/C9CY02619C ↗
85. Growth of Sr3Fe2O7-x single crystals by the floating zone method10.1016/j.jcrysgro.2004.07.091 ↗
86. Normal coordinate analysis to study the optical phonons in B-site cation disordered Ruddlesden-Popper Sr3B2O7 (B = V, Cr, Fe, Co) crystals10.1016/j.solidstatesciences.2023.107209 ↗
87. Raman spectra of the barium oxide peroxide and strontium oxide peroxide series10.1002/(SICI)1097-4555(199802)29:2<109::AID-JRS200>3.0.CO;2-Y ↗
88. Strontium ferrite SrFeO3-δ (2.50 ≤ 3-δ ≤ 2.87) studied by Raman and Mössbauer spectroscopy10.1016/j.ssc.2022.114912 ↗
89. In situ method correlating raman vibrational characteristics to chemical expansion via oxygen nonstoichiometry of perovskite thin films10.1002/adma.201902493 ↗
90. Raman spectra and defect chemical characteristics of Sr(Ti,Fe)O3−y solid solution of bulk pellets vs. thin films10.1039/D3TA04818G ↗
91. Effect of strontium (Sr) doping on the conductivity of ceria10.1016/j.jpowsour.2011.10.140 ↗