TiO2 structural support effects on the durability and recovery characteristics of proton exchange membrane fuel cell electrodes
Source abstract
Abstract
Proton-exchange membrane fuel cells (PEMFCs) have already entered commercial use in the transportation sector; however, enhancing their durability remains a key requirement for enhancing their competitiveness against internal combustion engines. Among the various degradation mechanisms, cathode deterioration plays a decisive role, with carbon support corrosion being particularly detrimental because of irreversible structural collapse within the electrode. Although introduction of structural additives has been proposed as a strategy of mitigating such degradation, previous studies have been limited by the concurrent contribution of electronic or ionic conductivity to these additives, making it challenging to isolate the pure structural reinforcement effect. In this study, the authors employ a star-shaped TiO 2 (ST) structure—an electrically and ionically low-conductive, corrosion-resistant material—to exclusively evaluate the structural stabilization effect on electrode degradation and durability. Gas chromatography analysis confirmed that the addition does not alter the extent of carbon corrosion. However, the ST-containing electrodes exhibited superior preservation of electrode thickness, pore structure, and capacitance compared to the cases in the reference electrode. As a result, the optimized ST electrode demonstrated more than twice the durability of the baseline electrode, while maintaining equal or higher initial performance. The findings demonstrate that not loss of conductivity but the structural collapse is the dominant factor limiting the durability of PEMFC under carbon corrosion conditions. Furthermore, this study is the first to experimentally isolate and quantify the pure structural stabilization effect using a low-conductive structural support, providing a design direction for next-generation durable PEMFC electrodes. • A low-conductive star-shaped TiO 2 support was used to isolate structural effects. • Structural support maintained thickness and pores during carbon corrosion. • Preserved structure reduced mass-transport loss and enabled durable performance. • Carbon corrosion levels remained similar with ST, proving durability was structural. • ST050 electrode showed 2.1 × higher durability with similar initial performance.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advancements in Solid Oxide Fuel Cells
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. Mancino · Energies · 2023 · 16 · 612910.3390/en16176129 ↗
2. Alternative energy technologies10.1038/35104599 ↗
3. Khushal, recent advancements of PEMFC in transport applications10.1063/5.0113278 ↗
4. Recent advancements in designing high-performance proton exchange membrane fuel cells: a comprehensive review10.1016/j.apenergy.2025.125753 ↗
5. The challenges in reliable determination of degradation rates and lifetime in polymer electrolyte membrane fuel cells
6. Recent advances in catalyst accelerated stress tests for polymer electrolyte membrane fuel cells10.1149/2.0881807jes ↗
7. New factors driving in-plane uneven degradation of Pt in proton exchange membrane fuel cells at high current density10.1016/j.cej.2025.161876 ↗
8. Failure behavior of gas diffusion layer in proton exchange membrane fuel cells10.1016/j.jpowsour.2021.230655 ↗
9. Gas diffusion layer degradation in proton exchange membrane fuel cells: mechanisms, characterization techniques and modelling approaches10.1016/j.jpowsour.2021.230560 ↗
10. Design optimization of proton exchange membrane fuel cell bipolar plate10.1016/j.enconman.2022.116586 ↗
11. Challenges in applying highly active Pt-based nanostructured catalysts for oxygen reduction reactions to fuel cell vehicles10.1038/s41565-020-00824-w ↗
12. New roads and challenges for fuel cells in heavy-duty transportation10.1038/s41560-021-00775-z ↗
13. Review: durability and degradation issues of PEM fuel cell components10.1002/fuce.200700053 ↗
14. Developing long-durability proton-exchange membrane fuel cells10.1016/j.joule.2025.101853 ↗
15. Mechanical failure and mitigation strategies for the membrane in a proton exchange membrane fuel cell10.1016/j.rser.2019.109289 ↗
16. Catalyst degradation in proton exchange membrane fuel cells: mechanisms, investigation techniques, and predictive modelling10.1016/j.ijhydene.2025.06.052 ↗
17. A review of PEM fuel cell durability: degradation mechanisms and mitigation strategies10.1016/j.jpowsour.2008.06.006 ↗
18. Membrane accelerated stress test development for polymer electrolyte fuel cell durability validated using field and drive cycle testing10.1149/2.0101806jes ↗
19. Understanding the process of carbon corrosion and its impact on performance degradation during simulated start-stop operations for the proton exchange membrane fuel cell10.1016/j.electacta.2023.143193 ↗
20. Chemical degradation of ionomer in the electrodes of proton exchange membrane fuel cells10.1016/j.jpowsour.2025.238160 ↗
21. Gradient degradation of ionomer along proton transport path in proton exchange membrane fuel cell catalyst layers: mechanistic insights from 5000 h NEDC testing10.1016/j.cej.2025.168826 ↗
22. Carbon corrosion in PEMFCs: mechanistic insight into the cause of mass transport degradation and its nonlinear behavior
23. Characterizing the structural degradation in a PEMFC cathode catalyst layer: carbon corrosion10.1149/1.3139963 ↗
24. Optimized gradient polytetrafluoroethylene layout to enhance liquid water transport of catalyst layers for anion exchange membrane fuel cells10.1016/j.ijheatmasstransfer.2024.125932 ↗
25. Optimizing catalyst layer structure design for improved water management of anion exchange membrane fuel cells10.1016/j.jpowsour.2024.234509 ↗
26. Carbon corrosion mechanism and mitigation strategies in a proton exchange membrane fuel cell (PEMFC): a review10.1016/j.jpowsour.2020.229434 ↗
27. Perspectives on carbon-alternative materials as Pt catalyst supports for a durable oxygen reduction reaction in proton exchange membrane fuel cells10.1016/j.jpowsour.2022.231422 ↗
28. Highly stable nanocarbon supported Pt catalyst for fuel cell via a molten salt graphitization strategy10.1016/j.ijhydene.2022.04.162 ↗
29. Chemical activation and catalytic graphitization enable a durable and active Pt/C for low platinum fuel cell10.1016/j.ijhydene.2024.01.307 ↗
30. Enhanced PEMFC durability with graphitized carbon black cathode catalyst supports under accelerated stress testing10.1039/D1RA01468D ↗
31. N-doped carbon nanotubes supported Pt nanowire catalysts for proton exchange membrane fuel cells10.1016/j.jpowsour.2022.231229 ↗
32. Correlation between the electrochemical durability of Pt/C catalysts and the surface functional groups of the support carbon10.1021/acsaem.2c03030 ↗
33. Strong interaction between titanium carbonitride embedded in mesoporous carbon nanofibers and Pt enables durable oxygen reduction
34. Enhanced durability of Pt-Based electrocatalysts in high-temperature polymer electrolyte membrane fuel cells using a graphitic carbon nitride nanosheet support10.1021/acssuschemeng.0c03238 ↗
35. Anti‐corrosive SnS2/SnO2 heterostructured support for Pt nanoparticles enables remarkable oxygen reduction catalysis via interfacial enhancement
36. One-pot hydrothermal synthesis of Pt–TiO2–Carbon as a highly active and stable electrocatalyst for oxygen reduction reaction
37. Inorganic non-carbon supported Pt catalysts and synergetic effects for oxygen reduction reaction10.1039/D2EE03642H ↗
38. Tunable synthesis of N,C-Codoped Ti3+-Enriched titanium oxide support for highly durable PEMFC cathode10.1021/acscatal.0c02570 ↗
39. Effect of stratification of cathode catalyst layers on durability of proton exchange membrane fuel cells10.3390/en14102975 ↗
40. Transfer-enhanced cathode with noncorrosive inorganic-based composite additive for durable proton exchange membrane fuel cells10.1016/j.jpowsour.2025.237063 ↗
41. Electrode structuring via carbon nanotubes and nafion ionomer–coated TiO2 enhances the durability of proton exchange membrane fuel cells under carbon corrosion conditions
42. Recent progress in carbon nanotubes support materials for Pt-based cathode catalysts in PEM fuel cells10.1016/j.ijhydene.2022.03.218 ↗
43. The priority and challenge of high-power performance of low-platinum proton-exchange membrane fuel cells10.1021/acs.jpclett.6b00216 ↗
44. Review on mechanisms and recovery procedures for reversible performance losses in polymer electrolyte membrane fuel cells10.1016/j.jpowsour.2020.229375 ↗
45. Improved operating strategies for the optimization of PEMFC system performance10.1016/j.jpowsour.2024.234089 ↗
46. Investigation of an electrode reversal method and degradation recovery mechanisms of PEM fuel cell10.1016/j.electacta.2023.142181 ↗
47. Investigation of the reversible performance degradation mechanism of the PEMFC stack during long-term durability test10.1016/j.energy.2022.124747 ↗
48. Investigation on performance recovery and consistency of proton exchange membrane fuel cell stack under automotive accelerated stress test10.1016/j.apenergy.2025.125388 ↗
49. Recovery mechanisms in proton exchange membrane fuel cells after accelerated stress tests10.1016/j.jpowsour.2015.07.063 ↗
50. Cation-vacancy-rich NiFe2O4 nanoparticles embedded in Ni3Se2 nanosheets as an advanced catalyst for oxygen evolution reaction10.1016/j.cej.2024.153270 ↗
51. Molecular level heterojunction with sulfur vacancy of stable polyhedral star configuration for boosting hydroxide ion storage
52. Impact of fuel starvation–induced anode carbon corrosion in proton exchange membrane fuel cells on the structure of the membrane electrode assembly and exhaust gas emissions: a quantitative case study10.1016/j.jpowsour.2024.235032 ↗
53. Diagnostic tools in PEM fuel cell research: part I electrochemical techniques10.1016/j.ijhydene.2008.01.013 ↗
54. Hydrogen oxidation artifact during platinum oxide reduction in cyclic voltammetry analysis of low-loaded PEMFC electrodes10.1007/s12678-020-00627-6 ↗
55. New insights into perfluorinated sulfonic-acid ionomers10.1021/acs.chemrev.6b00159 ↗
56. Electrospun nanofiber electrodes for low platinum-loaded fuel cells
57. Anti-corrosion carbon support for mass transfer enhancement in low-platinum loaded fuel cells10.1007/s11708-025-1042-0 ↗
58. Experimental characterization methodology for the identification of voltage losses of PEMFC: applied to an open cathode stack10.1016/j.ijhydene.2011.11.130 ↗
59. Polarization losses under accelerated stress test using multiwalled carbon nanotube supported Pt catalyst in PEM fuel cells10.1149/1.3530843 ↗
60. Complex capacitance analysis on leakage current appearing in electric double-layer capacitor carbon electrode10.1149/1.1931469 ↗
61. How microstructures, oxide layers, and charge transfer reactions influence double layer capacitances. Part 1: impedance spectroscopy and cyclic voltammetry to estimate electrochemically active surface areas (ECSAs)10.1039/D3CP04743A ↗