Impact of crosslinked poly(arylene piperidinium) particles in electrode structures on the performance of anion exchange membrane fuel cells
Source abstract
Abstract
The electrode's composition and structure, affecting ion-conduction and water uptake and transport, is crucial for polymer electrolyte fuel cells. This study investigates the role of particles versus dispersed ionomer based on poly(arylene piperidinium) (PAP) for AEMFC. Mixed ionomer electrodes, consisting of linear PAP ionomers and crosslinked particles, are synthesized and evaluated in AEMFC single cells through electrochemical characterizations. The addition of insoluble particles corresponding to 5 % of total electrode weight leads to an increase in peak power density of ∼60 % in comparison to when employing electrodes based purely on the linear ionomers such as poly(terphenyl piperidinium) and poly(terphenyl piperidinium- co -trifluoroacetophenone), respectively. A deconvolution of cell resistance contributions based on electrochemical impedance spectroscopy (EIS) data, combined with a distribution of relaxation times analysis (DRT), shows a significant decrease in effective cathode charge transfer resistance. This is attributed to particles serving as bridges between the membrane and the reaction sites, leading to increased ionic conductivity and active site utilization via shortening the distance of water and ion transport through the ionomer phase. In an expansion of the study, PAP particles were added to an electrode sample based on commercial Aemion + ™. A smaller peak power density increase of 27 % was observed, emphasizing the importance of matching the chemical structures of the particles, membrane, and linear ionomer. • The concept of mixed ionomer electrodes was successfully implemented in an AEMFC. • Crosslinked poly(arylene piperidinium) was used as basis for particles and ionomers. • EIS/DRT was applied to deconvolute and quantify resistance contributions. • Performance increase of ca. 60 % could be observed when particles were added. • Particles and ionomers from different polymer types incurred interfacial resistance.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Fuel Cells and Related Materials · Advanced battery technologies research · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. Review of cell performance in anion exchange membrane fuel cells10.1016/j.jpowsour.2017.07.117 ↗
2. Anion exchange membranes for fuel cells: state-of-the-art and perspectives10.1002/aenm.202200934 ↗
3. Commercial anion exchange membranes (AEMs) for fuel cell and water electrolyzer applications: performance, durability, and materials advancement10.3390/separations10080424 ↗
4. Challenges and strategies of anion exchange membranes in hydrogen-electricity energy conversion devices
5. State-of-the-art and developmental trends in platinum group metal-free cathode catalyst for anion exchange membrane fuel cell (AEMFC)10.1016/j.apcatb.2022.121733 ↗
6. Y.I. Yang, Platinum-Free Electrocatalysts Design, Synthesis, and Energy Applications, (n.d.)..
7. Poly(aryl piperidinium) membranes and ionomers for hydroxide exchange membrane fuel cells10.1038/s41560-019-0372-8 ↗
8. Branched Poly(Aryl piperidinium) membranes for anion-exchange membrane fuel cells
9. Anion exchange membranes for alkaline fuel cells: a review10.1016/j.memsci.2011.04.043 ↗
10. Anion exchange membranes for fuel cell application: a review10.3390/polym14061197 ↗
11. Anion exchange membranes for alkaline polymer electrolyte fuel cells—A concise review10.3390/ma15165601 ↗
12. High performance anion exchange membrane fuel cells enabled by fluoropoly(olefin) membranes10.1002/adfm.201902059 ↗
13. High-performance poly(fluorenyl aryl piperidinium)-based anion exchange membrane fuel cells with realistic hydrogen supply10.1016/j.jpowsour.2021.230474 ↗
14. Soluble poly(aryl piperidinium) with extended aromatic segments as anion exchange membranes for alkaline fuel cells and water electrolysis10.1016/j.memsci.2021.119966 ↗
15. Achieving high-performance and 2000 h stability in anion exchange membrane fuel cells by manipulating ionomer properties and electrode optimization10.1002/aenm.202001986 ↗
16. Poly(Alkyl-Terphenyl piperidinium) ionomers and membranes with an outstanding alkaline-membrane fuel-cell performance of 2.58 W cm−210.1002/anie.202013395 ↗
17. Asymmetric electrode ionomer for low relative humidity operation of anion exchange membrane fuel cells10.1039/D0TA05807F ↗
18. Poly(fluorenyl aryl piperidinium) membranes and ionomers for anion exchange membrane fuel cells
19. Fluorinated Poly(aryl piperidinium) membranes for anion exchange membrane fuel cells
20. Toward improved alkaline membrane fuel cell performance using quaternized aryl-ether free polyaromatics10.1021/acs.chemmater.8b00358 ↗
21. On the stability of anion exchange membrane fuel cells incorporating polyimidazolium ionene (Aemion+®) membranes and ionomers10.1039/D2SE00690A ↗
22. Tuning poly(arylene piperidinium) anion-exchange membranes by copolymerization, partial quaternization and crosslinking10.1016/j.memsci.2019.01.036 ↗
23. Ionomer dispersion solvent influence on the microstructure of co–n–c catalyst layers for anion exchange membrane fuel cell10.1016/j.jpowsour.2020.229259 ↗
24. Recent insights on catalyst layers for anion exchange membrane fuel cells
25. Adsorption of polyaromatic backbone impacts the performance of anion exchange membrane fuel cells10.1021/acs.chemmater.9b01092 ↗
26. The impact of the catalyst layer structure on the performance of anion exchange membrane fuel cell10.1016/j.electacta.2021.139439 ↗
27. Radiation-grafted anion-exchange membranes: the switch from low- to high-density polyethylene leads to remarkably enhanced fuel cell performance10.1039/C9EE00331B ↗
28. Nonconformal particles of hyperbranched sulfonated phenylated Poly(phenylene) ionomers as proton-conducting pathways in proton exchange membrane fuel cell catalyst layers10.1021/acsenergylett.2c01038 ↗
29. Improved electrode performance using fine-tuned Poly(arylene piperidinium) ionomers in anion exchange membrane fuel cells10.1002/aenm.202403355 ↗
30. Tuning poly(arylene piperidinium) anion-exchange membranes by copolymerization, partial quaternization and crosslinking10.1016/j.memsci.2019.01.036 ↗
31. Improving poly(arylene piperidinium) anion exchange membranes by monomer design10.1039/D2TA03862E ↗
32. Aemion+TM - Anion-Exchange materials - ionomr innovations inc., (n.d.). https://ionomr.com/solutions/aemion/(accessed December 11, 2023).
33. Electrochemical performance of poly(arylene piperidinium) membranes and ionomers in anion exchange membrane fuel cells10.1016/j.jpowsour.2021.230287 ↗
34. Advanced impedance study of polymer electrolyte membrane single cells by means of distribution of relaxation times10.1016/j.jpowsour.2018.09.004 ↗
35. ciuccislab/pyDRTtools: An intuitive python GUI to compute the DRT, (n.d.). https://github.com/ciuccislab/pyDRTtools (accessed November 29, 2023)..
36. Impedance modelling of porous electrode structures in polymer electrolyte membrane fuel cells10.1016/j.jpowsour.2019.227279 ↗
37. How the distribution of relaxation times enhances complex equivalent circuit models for fuel cells10.1016/j.electacta.2020.136764 ↗
38. Distribution of relaxation times as an accessible method to optimize the electrode structure of anion exchange membrane fuel cells10.1016/j.jpowsour.2022.232608 ↗
39. Electrochemical impedance spectroscopy─a tutorial10.1021/acsmeasuresciau.2c00070 ↗
40. Towards robust autonomous impedance spectroscopy analysis: a calibrated hierarchical Bayesian approach for electrochemical impedance spectroscopy (EIS) inversion10.1016/j.electacta.2020.137493 ↗
41. Electrochemical impedance imaging via the distribution of diffusion times10.1103/PhysRevLett.120.116001 ↗
42. A general model for the impedance of batteries and supercapacitors: the non-linear distribution of diffusion times10.1016/j.electacta.2019.134853 ↗
43. Unravelling electrolyte dynamics in reversible molten carbonate fuel cells through distribution of relaxation times10.1016/j.ijhydene.2024.10.124 ↗
44. Synergistic electrocatalysts for alkaline hydrogen oxidation and evolution reactions
45. Electrocatalytic hydrogen oxidation in alkaline media: from mechanistic insights to catalyst design10.1021/acsnano.2c00641 ↗
46. F. Jaouen, Electrochemical CHARACTERISATION OF porous CATHODES IN THE POLYMER ELECTROLYTE FUEL CELL, (n.d.)..
47. Platinum dissolution and redeposition from Pt/C fuel cell electrocatalyst at potential cycling, (n.d.). https://doi.org/10.1149/2.0191806jes.10.1149/2.0191806jes ↗
48. Correlation between tafel analysis and electrochemical impedance spectroscopy by prediction of amperometric response from EIS10.1021/acsomega.9b02672 ↗
49. Revealing and accelerating slow electron transport in amorphous molybdenum sulphide particles for hydrogen evolution reaction10.1039/c3cc45416a ↗
50. Oxygen reduction reaction kinetics on Silver- and platinum thin-layer electrodes in AEMFC10.1149/1945-7111/adce3c ↗
51. Inductive phenomena at low frequencies in impedance spectra of proton exchange membrane fuel cells – a review10.1016/j.jpowsour.2016.06.119 ↗
52. On the intrinsic electrochemical nature of the inductance in EIS: a Monte Carlo simulation of the two-consecutive-step mechanism: the flat surface 2 D case10.1016/j.electacta.2008.07.023 ↗
53. Three-dimensional impedance spectroscopy diagrams for processes involving electrosorbed intermediates, introducing the third electrode-potential variable—Examination of conditions leading to pseudo-inductive behavior10.1016/0013-4686(93)80302-G ↗
54. G. Yang, C. Lee, X. Qiao, · Siddharth, K. Babu, U. Martinez, J.S. Spendelow, Advanced electrode structures for proton exchange membrane fuel cells: current status and path forward, (123AD). https://doi.org/10.1007/s41918-023-00208-3..
55. Grooved electrodes for high-power-density fuel cells10.1038/s41560-023-01263-2 ↗
56. Fuel cell catalyst layers: a polymer science perspective10.1021/cm401445h ↗
57. Interpreting ionic conductivity for polymer electrolyte fuel cell catalyst layers with electrochemical impedance spectroscopy and transmission line modeling