Sustainable electrospun MXene–biopolymer composite membranes for efficient bioelectricity generation in microbial fuel cells
Source abstract
Abstract
In this study, electrospun poly(3-hydroxybutyrate-co-4-hydroxybutyrate) (P34HB) composite membranes containing MXene (Ti3C2Tx) at different concentrations (0.5-5 wt%) are produced, and their performance is evaluated as proton exchange membranes in microbial fuel cells (MFCs). The addition of MXene significantly improves the physicochemical and electrochemical performance of the membranes due to its high electrical conductivity, surface hydrophilicity, and layered structure. The composite membrane containing 3 wt% MXene demonstrates superior proton conductivity (19.5 mS/cm at 80 degrees C), ion exchange capacity (0.87 meq/g), and water retention capacity (101.9 %), exceeding the performance of the pure P34HB membrane by more than three times. The MFC tests reveal an exceptional open-circuit voltage of 795 mV, a maximum power density of 301 mW/m2, a Coulombic efficiency of 18.7 %, and a chemical oxygen demand (COD) removal efficiency of 85 %. The results confirm that the incorporation of MXene effectively enhances proton conduction and electron recovery by reducing internal resistance. To the authors' knowledge, this study is the first to report electrospun MXene-P34HB nanofiber membranes used in MFCs and presents a sustainable and biodegradable alternative for next-generation bioelectrochemical systems.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microbial Fuel Cells and Bioremediation · MXene and MAX Phase Materials · Ammonia Synthesis and Nitrogen Reduction
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (69)
Show source-provided references
1. The role of renewable energy investment in tackling climate change concerns: environmental policies for achieving SDG-1310.1002/sd.2491 ↗
2. Bioenergy and bio-products from bio-waste and its associated modern circular economy: current research trends, challenges, and future outlooks10.1016/j.fuel.2021.121859 ↗
3. World energy outlook 2022
4. Microbial fuel cells - applications for generation of electrical power and beyond10.3109/1040841X.2014.905513 ↗
5. Enhanced fumion nanocomposite membranes embedded with graphene oxide as a promising anion exchange membrane for fuel cell application10.1016/j.ijhydene.2022.10.184 ↗
6. Functional and environmental performances of novel electrolytic membranes for PEM fuel cells: a lab-scale case study10.3390/cleantechnol5010005 ↗
7. Characterization of the thermolysis products of Nafion membrane: a potential source of perfluorinated compounds in the environment
8. Next‐Generation Proton‐Exchange membranes in microbial fuel cells: overcoming nafion's limitations10.1002/ente.202301346 ↗
9. Development and comprehensive characterization of low-cost hybrid clay based ceramic membrane for power enhancement in plant based microbial fuel cells (PMFCs)10.1016/j.matchemphys.2023.127337 ↗
10. A review of the application of polyvinyl alcohol membranes for fuel cells10.1007/s11581-021-04338-w ↗
11. Sulfonated poly ether ether ketone with different degree of sulphonation in microbial fuel cell: application study and economical analysis10.1016/j.ijhydene.2015.10.029 ↗
12. Phosphomolybdic acid functionalized nano silica for enhanced anti-biofouling effect in polymer electrolyte membranes for microbial fuel cell application10.1016/j.psep.2024.09.021 ↗
13. Phytic acid-functionalized Zr-MOF mixed matrix membranes with UF-level water permeance, NF-level separation efficiency, and antifouling properties for the removal of dyes and heavy metals10.1016/j.desal.2025.119509 ↗
14. Enhanced solid-electrolyte interface efficiency for practically viable hydrogen-air fuel cell systems10.1016/j.jechem.2024.08.046 ↗
15. Metal organic framework–derived, N–C–SO3H/COOH–incorporated, phenolphthalein-based propyl sulfonated poly(arylene ether) composite membranes for proton exchange membranes in fuel cells10.1016/j.memsci.2025.124555 ↗
16. Degradation rates of plastics in the environment10.1021/acssuschemeng.9b06635 ↗
17. Synthesis and characterization of polyhydroxyalkanoates from soil bacterium Bacillus sp10.1002/jctb.7093 ↗
18. Degradation of conventional plastic wastes in the environment: a review on current status of knowledge and future perspectives of disposal10.1016/j.scitotenv.2020.144719 ↗
19. Alternatives to conventional plastics: polyhydroxyalkanoates (PHA) from microbial sources and recent approaches – a review10.1016/j.psep.2025.106809 ↗
20. Production and characterization of polyhydroxyalkanoates synthesized by E. Coli Isolated from sludge soil10.1016/j.matpr.2020.05.725 ↗
21. Polyhydroxyalkanoate production by actinobacterial isolates in Lignocellulosic hydrolysate10.3390/pr12061112 ↗
22. Bio-based plastics, biodegradable plastics, and compostable plastics: biodegradation mechanism, biodegradability standards and environmental stratagem10.1016/j.ibiod.2024.105887 ↗
23. Recent advances in two-dimensional MXene membranes for emerging nanofiltration applications: a review10.1016/j.nwnano.2025.100154 ↗
24. Two-dimensional MXene incorporated graphene oxide composite membrane with enhanced water purification performance10.1016/j.memsci.2019.117431 ↗
25. Salt-modified MXene membrane for ultrafast and efficient cationic and anionic dyes removal10.1016/j.jwpe.2022.103133 ↗
26. Construction of MoS2@MXene composite membranes with stable laminar structure for superior nanofiltration performance10.1016/j.desal.2024.117419 ↗
27. Simultaneously tuning interlayer spacing and termination of MXenes by Lewis-basic halides
28. Enhanced electrochemical performance of dendritic Fe 2 O 3 nanowires on hollow carbon nanofibers with manganese and phosphorus co-doping for solid-state symmetric supercapacitors
29. Block poly(ester-urethane)s based on poly(3-hydroxybutyrate-co-4-hydroxybutyrate) and poly(3-hydroxyhexanoate-co-3-hydroxyoctanoate)10.1016/j.biomaterials.2008.12.078 ↗
30. Degradation behaviors of bioabsorbable P3/4HB monofilament suture in vitro and in vivo10.1002/jbm.b.31534 ↗
31. Effect of hydrophobically modified graphene oxide on the properties of poly(3-hydroxybutyrate-co-4-hydroxybutyrate)10.1016/j.polymer.2016.11.042 ↗
32. Biodegradable block poly(ester-urethane)s based on poly(3-hydroxybutyrate-co-4-hydroxybutyrate) copolymers10.1016/j.biomaterials.2011.01.031 ↗
33. Crystallization behaviors and morphology of biodegradable poly(3-hydroxybutyrate-co-4-hydroxybutyrate)10.1007/s10973-011-1768-2 ↗
34. Polymeric ionic liquids and MXene synergistically improve proton conductivity and mechanical properties of polybenzimidazole-based high-temperature proton exchange membranes10.1016/j.ijhydene.2022.11.213 ↗
35. Experimental and model refinement of water content and membrane conductivity in reinforced composite proton exchange membranes10.1016/j.ijhydene.2024.11.056 ↗
36. Synthesis and characterization of sulfonated chitosan (SCS)/sulfonated polyvinyl alcohol (SPVA) blend membrane for microbial fuel cell application10.1016/j.mseb.2023.116942 ↗
37. Biodegradable rGO-reinforced poly(3-hydroxybutyrate- co -4-hydroxybutyrate) (P3HB4HB) composite membranes for enhanced power generation in microbial fuel cells: a sustainable alternative to commercial PEMs10.1039/D5SE00980D ↗
38. Impact of anode surface modifications on microbial fuel cell performance and algal biomass production
39. Microbial fuel cells: methodology and technology10.1021/es0605016 ↗
40. Preparation and characterization of polymer‐Ti 3 C 2 T x (MXene) composite nanofibers produced via electrospinning10.1002/app.45295 ↗
41. Optimizing electrospun PVA fibers with MXene integration for biomedical applications10.1002/mame.202400433 ↗
42. Conductive and antibacterial scaffold with rapid crimping property for application prospect in repair of peripheral nerve injury
43. Tailoring crystallinity of electrospun plla fibres by control of electrospinning parameters10.3390/polym4031331 ↗
44. Effects of solvent and electrospinning parameters on the morphology and piezoelectric properties of PVDF nanofibrous membrane10.3390/nano12060962 ↗
45. Non-isothermal crystallization and thermal degradation kinetics of MXene/linear low-density polyethylene nanocomposites10.1515/epoly-2017-0017 ↗
46. Tailoring the polyvinylidene fluoride phase structure in high permittivity MXene/polyvinylidene fluoride composite films via supercooling of the polymer melt10.1002/pc.29583 ↗
47. Effects of MXene on nonisothermal crystallization kinetics of isotactic polypropylene10.1021/acsomega.1c02970 ↗
48. Exploring the effects of MXene on nonisothermal crystallization and melting behavior of β-Nucleated isotactic polypropylene10.3390/polym13213815 ↗
49. Effect of MXene as nucleating agent on crystallization behaviour and thermal stability of PET nanocomposites10.1088/1742-6596/3061/1/012026 ↗
50. 3D melt electrowritten MXene-reinforced scaffolds for tissue engineering applications10.1088/1758-5090/adf803 ↗
51. Preparation, mechanical and anti-friction performance of MXene/polymer composites10.1016/j.matdes.2015.12.084 ↗
52. Ti 3 C 2 MXene–polymer nanocomposites and their applications10.1039/D0TA08023C ↗
53. The modification of Poly(3-hydroxybutyrate-co-4-hydroxybutyrate) by Melt blending10.3390/polym14091725 ↗
54. Synergistic integration of MXene nanostructures into electrospun fibers for advanced biomedical engineering applications10.1039/D4NH00209A ↗
55. The interactions between polyhydroxyalkanoates and cells involved in the process of tissue damage repair10.1007/s10924-025-03513-8 ↗
56. Fabrication of hydrophobic biocomposite by combining cellulosic fibers with polyhydroxyalkanoate10.1007/s10570-017-1235-8 ↗
57. Advancements in high-performance MXene composite fibers integrated with various functional materials: fabrication, functionalization, property enhancement, and applications10.1016/j.jmst.2025.06.046 ↗
58. MXenes: Two-dimensional building blocks for future materials and devices10.1021/acsnano.1c03161 ↗
59. Perspectives on solution processing of two-dimensional MXenes10.1016/j.mattod.2021.02.010 ↗
60. Hydroxide conduction enhancement of chitosan membranes by functionalized MXene10.3390/ma11112335 ↗
61. Concrete-structured Nafion@MXene/Cellulose acetate cation exchange membrane for reverse electrodialysis10.1016/j.memsci.2021.120239 ↗
62. Development of MXene incorporated PVDF based membranes for an enhanced performance in higher temperature PEM fuel cells10.1016/j.psep.2024.06.126 ↗
63. Preparation and characterization of Ti3C2TX MXene/PVDF cation exchange membrane for electrodialysis10.1016/j.colsurfa.2022.129556 ↗
64. MXene enhanced the electromechanical performance of a nafion-based actuator10.3390/ma15082833 ↗
65. Improved thermo-mechanical properties and reduced hydrogen permeation of short side-chain perfluorosulfonic acid membranes doped with ti3c2tx10.3390/ma14247875 ↗
66. MXene: a two-dimensional nanomaterial for enhancing start-up performance of high temperature proton exchange membranes
67. Engineered nanochannels in MXene heterogeneous proton exchange membranes mediated by cellulose nanofiber/sodium alginate dual crosslinked networks10.1002/adfm.202570111 ↗
68. MXene/Polymer nanocomposites: preparation, properties, and applications10.1080/15583724.2020.1729179 ↗
69. Gas sweetening