Localized CeO2-assisted radical suppression in hydrocarbon-reinforced membranes for durable water electrolysis
Source abstract
Abstract
The chemical degradation of proton exchange membranes (PEMs) in proton exchange membrane water electrolysis (PEMWE) is primarily caused by the reactive oxygen species generated at the cathode, which attack the ionomer structure and compromise long-term durability. In this study, an asymmetrical hydrocarbon-based (HC) reinforced composite membrane is fabricated by selectively localizing cerium oxide (CeO 2 ) nanoparticles—a radical scavenger—on the cathode-facing side to maximize radical quenching efficiency while minimizing inorganic additive content. The membrane is constructed as a five-layer structure using sulfonated poly(arylene ether sulfone) copolymers with a 50 % sulfonation degree (SPAES50) and porous polytetrafluoroethylene (PTFE) supports to enhance mechanical strength and dimensional stability. The asymmetrical configuration effectively suppresses hydrogen crossover, exhibits lower water uptake, and improves the dimensional stability compared to pristine SPAES50. Among the prepared membranes, the composite membrane with 5 wt% CeO 2 layer on the cathode-facing side demonstrates the optimal properties of proton conductivity (0.154 S/cm at 80 °C), hydrogen permeability (37.3 barrer), and durability, retaining 99 % of its initial cell performance after operating 200 h at 2 A/cm 2 . These results confirm that the targeted localization of radical scavengers on the cathode-facing side, combined with PTFE reinforcement, is an effective strategy for developing durable HC-based PEMs for PEMWE applications. • Asymmetric hydrocarbon composite membrane with CeO 2 localized on cathode side. • Porous PTFE supports enhanced membrane mechanical strength and dimensional stability. • Composite membrane showed lower H 2 permeability and higher stability vs SPAES50. • CeO 2 on cathode side enhanced radical scavenging and PEMWE durability. • Optimized F/SP-C5 showed highest PEMWE performance with 99 % retention at 200 h.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Fuel Cells and Related Materials · Hybrid Renewable Energy Systems · Electrocatalysts for Energy Conversion
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Water transport according to temperature and current in PEM water electrolyzer10.1016/j.ijhydene.2019.10.209 ↗
2. A review on global warming potential, challenges and opportunities of renewable hydrogen production technologies
3. Seawater electrolysis: a critical review on fundamentals, recent progress, and future perspectives on sustainable hydrogen generation10.1016/j.nxener.2025.100407 ↗
4. Perspective on the hydrogen economy as a pathway to reach net-zero CO2 emissions in Europe10.1039/D1EE02118D ↗
5. Alkaline water electrolysis for green hydrogen production10.1021/acs.accounts.3c00709 ↗
6. Green hydrogen production pathways for sustainable future with net zero emissions10.1016/j.fuel.2023.130131 ↗
7. Green methods for hydrogen production10.1016/j.ijhydene.2011.03.173 ↗
8. There are hydrogen production pathways with better than green hydrogen economic and environmental costs10.1016/j.ijhydene.2021.04.182 ↗
9. Green hydrogen production by water electrolysis: current status and challenges
10. An overview of water electrolysis technologies for green hydrogen production10.1016/j.egyr.2022.10.127 ↗
11. Green hydrogen as feedstock: financial analysis of a photovoltaic-powered electrolysis plant10.1016/j.ijhydene.2020.02.062 ↗
12. Recent advances in proton exchange membrane water electrolysis10.1039/D2CS00681B ↗
13. A comprehensive review of the material innovations and corrosion mitigation strategies for PEMWE bipolar plates10.1016/j.ijhydene.2024.09.208 ↗
14. A high-performance, durable and low-cost proton exchange membrane electrolyser with stainless steel components10.1039/D1EE02112E ↗
15. Key components and design strategy for a proton exchange membrane water electrolyzer10.1002/sstr.202200130 ↗
16. Novel components in proton exchange membrane (PEM) water electrolyzers (PEMWE): Status, challenges and future needs. A mini review10.1016/j.elecom.2020.106704 ↗
17. State of understanding of nafion10.1021/cr0207123 ↗
18. A comprehensive review of the state-of-the-art of proton exchange membrane water electrolysis
19. A facile, effective thermal crosslinking to balance stability and proton conduction for proton exchange membranes based on blend sulfonated poly(ether ether ketone)/sulfonated poly(arylene ether sulfone)10.1016/j.ijhydene.2021.02.022 ↗
20. Comb-shaped sulfonated poly(aryl ether sulfone) proton exchange membrane for fuel cell applications10.1016/j.ijhydene.2022.03.134 ↗
21. Fully hydrocarbon membrane electrode assemblies for proton exchange membrane fuel cells and electrolyzers: an engineering perspective10.1002/aenm.202103559 ↗
22. Stability and degradation mechanisms of radiation-grafted polymer electrolyte membranes for water electrolysis10.1021/acsami.6b03050 ↗
23. Physical modeling of chemical membrane degradation in polymer electrolyte membrane fuel cells: influence of pressure, relative humidity and cell voltage10.1016/j.jpowsour.2018.10.085 ↗
24. Composite proton exchange membrane with balanced proton conductivity and swelling ratio improved by gradient-distributed POSS nanospheres10.1016/j.coco.2021.100676 ↗
25. Critical review—identifying critical gaps for polymer electrolyte water electrolysis development10.1149/2.1441704jes ↗
26. Durability and degradation analysis of hydrocarbon ionomer membranes in polymer electrolyte fuel cells accelerated stress evaluation10.1016/j.jpowsour.2017.09.025 ↗
27. Factors influencing the performance and durability of polymer electrolyte membrane water electrolyzer: a review10.1016/j.ijhydene.2022.08.180 ↗
28. Constrained hydrocarbon-based ionomers in porous Poly(tetrafluoroethylene) supports for enhanced durability of polymer electrolyte membrane fuel cells and water electrolyzers10.1016/j.jpowsour.2022.232221 ↗
29. PTFE-reinforced pore-filling proton exchange membranes with sulfonated poly(ether ether ketone)s and poly(aryl ether sulfone)s10.1016/j.memsci.2024.122431 ↗
30. Multilayered hydrocarbon ionomer/PTFE composite electrolytes with enhanced performance for energy conversion devices10.1016/j.ijhydene.2022.11.038 ↗
31. Well-dispersed radical scavengers for highly durable hydrocarbon-based proton exchange membranes in water electrolysis
32. Chemically sustainable fuel cells via layer-by-layer fabrication of sulfonated poly(arylene ether sulfone) membranes containing cerium oxide nanoparticles10.1016/j.memsci.2021.119430 ↗
33. A manganese doping deficient cerium base metal organic framework as radical scavenger for highly-durable proton exchange membrane water electrolysis10.1016/j.memsci.2024.123207 ↗
34. Hydrocarbon ionomer/polytetrafluoroethylene composite membranes containing radical scavengers for robust proton exchange membrane water electrolysis10.1016/j.eurpolymj.2025.114024 ↗
35. High performance and robust durability proton conductive composite membranes containing CeO2-TiC incorporated sulfonated poly(arylene ether) for hydrogen fuel cells10.1016/j.jallcom.2024.175681 ↗
36. Potential bifunctional filler (CeO2–ACNTs) for nafion matrix toward extended electrochemical power density and durability in proton-exchange membrane fuel cells operating at reduced relative humidity10.1021/acssuschemeng.9b01757 ↗
37. Simultaneous improvement of power density and durability of sulfonated poly(ether ether ketone) membrane by embedding CeO2-ATiO2: a comprehensive study in low humidity proton exchange membrane fuel cells10.1002/er.7781 ↗
38. A review on understanding and identifying degradation mechanisms in PEM water electrolysis cells: insights for stack application, development, and research10.1016/j.ijhydene.2024.04.017 ↗
39. Main degradation mechanisms of polymer electrolyte membrane fuel cell stacks – mechanisms, influencing factors, consequences, and mitigation strategies10.1016/j.ijhydene.2023.06.215 ↗
40. Numerical modeling for the degradation rate of hydrocarbon-based proton exchange membrane at different current densities in water electrolysis10.1016/j.ijhydene.2025.04.087 ↗
41. Radical (HO•, H• and HOO•) formation and ionomer degradation in polymer electrolyte fuel cells10.1149/1.3581040 ↗
42. A new insight into the chemical degradation of proton exchange membranes in water electrolyzers10.1039/D3TA05224A ↗
43. Membrane degradation in PEM water electrolyzer: numerical modeling and experimental evidence of the influence of temperature and current density10.1016/j.ijhydene.2014.11.111 ↗
44. Online measurements of fluoride ions in proton exchange membrane water electrolysis through ion chromatography10.1016/j.jpowsour.2020.229179 ↗
45. Influence of the bisphenol structure on the direct synthesis of sulfonated poly(arylene ether) copolymers. I10.1002/pola.10755 ↗
46. Direct polymerization of sulfonated poly(arylene ether sulfone) random (statistical) copolymers: candidates for new proton exchange membranes10.1016/S0376-7388(01)00620-2 ↗
47. Novel proton conducting sulfonated poly(arylene ether) copolymers containing aromatic nitriles10.1016/j.memsci.2004.03.031 ↗
48. Alcohol-treated porous PTFE substrate for the penetration of PTFE-incompatible hydrocarbon-based ionomer solutions10.1021/acs.langmuir.1c00120 ↗
49. Stresses and their impacts on proton exchange membrane fuel cells: a review10.1016/j.ijhydene.2017.12.033 ↗
50. Titanium oxide/graphitic carbon nitride nanocomposites as fillers for enhancing the performance of SPAES membranes for fuel cells10.1016/j.jiec.2020.08.002 ↗
51. High-pressure PEM water electrolysis and corresponding safety issues10.1016/j.ijhydene.2010.03.058 ↗
52. Highly sulfonated aromatic graft polymer with very high proton conductivity and low hydrogen permeability for water electrolysis10.1021/acsenergylett.2c02143 ↗
53. Comparative investigation into the performance and durability of long and short side chain ionomers in polymer electrolyte membrane fuel cells10.1016/j.jpowsour.2019.227078 ↗
54. A review of proton exchange membrane water electrolysis on degradation mechanisms and mitigation strategies10.1016/j.jpowsour.2017.09.006 ↗