journal article·2026-03

Tailor made lithium nickel manganese oxide with appropriate composition, structure and morphology: Optimizing synthesis condition and electrolyte composition for enhanced performance

Arghyadeep Sau, Rohit Anand, Karabi Das, Siddhartha Das

Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (89)

Show source-provided references
1. Lithium ion, lithium metal, and alternative rechargeable battery technologies: the odyssey for high energy density10.1007/s10008-017-3610-7 ↗
2. Brief history of early lithium-battery development10.3390/ma13081884 ↗
3. Unraveling the stable cathode electrolyte interface in all solid-state thin-film battery operating at 5 V10.1002/aenm.202201119 ↗
4. Key strategies for enhancing the cycling stability and rate capacity of LiNi0.5Mn1.5O4 as high-voltage cathode materials for high power lithium-ion batteries10.1016/j.jpowsour.2016.03.070 ↗
5. Synthesis of spinel LiNi0.5Mn1.5O4 with secondary plate morphology as cathode material for lithium ion batteries10.1016/j.jpowsour.2015.05.056 ↗
6. Truncated octahedral LiNi0.5Mn1.5O4 cathode material for ultralong-life lithium-ion battery: positive (100) surfaces in high-voltage spinel system10.1016/j.jpowsour.2015.09.066 ↗
7. On the composition of LiNi0.5Mn1.5O4 cathode active materials10.1002/aenm.202203778 ↗
8. Performance and life analysis of lithium‐ion batteries aided by data‐driven analysis
9. Design and analysis of Lithium-ion pouch cell with LMO-NMC blended cathode using coupled thermo-electro-chemical model10.1016/j.est.2023.109958 ↗
10. Deep machine learning approaches for battery health monitoring10.1016/j.energy.2024.131540 ↗
11. Spinel LiNi0.5Mn1.5O4 and its derivatives as cathodes for high-voltage Li-ion batteries10.1007/s10008-010-1061-5 ↗
12. Review recent progress in high-voltage lithium ion batteries10.1016/j.jpowsour.2013.03.024 ↗
13. Crystal chemistry and electrochemistry of LixMn1.5Ni0.5O4 solid solution cathode materials10.1021/acs.chemmater.7b01898 ↗
14. Nanoscale Ni/Mn ordering in the high voltage spinel cathode LiNi0.5Mn1.5O410.1021/acs.chemmater.6b02946 ↗
15. Facile synthesis of spinel LiNi0.5Mn1.5O4 cathode materials using M2(OH)2(C8H4O4)-class metal-organic frameworks10.1007/s11581-017-2102-1 ↗
16. Cation ordering and oxygen release in LiNi0.5-xMn1.5+xO4-y (LNMO): in situ neutron diffraction and performance in Li ion full cells10.1021/acsaem.8b02217 ↗
17. Composition-structure relationships in the Li-ion battery electrode material LiNi0.5Mn1.5O410.1021/cm301148d ↗
18. Synthesis and electrochemical properties of LiNi0.5Mn1.5O4 for Li-Ion batteries by the metal-organic framework method10.1021/acsami.8b02553 ↗
19. High-rate performances of the ru-doped spinel LiNi0.5Mn1.5O4: effects of doping and particle size10.1021/jp110746w ↗
20. Regulating dynamic electrochemical interface of LiNi0.5Mn1.5O4 spinel cathode for realizing simultaneous Mn and Ni redox in rechargeable lithium batteries
21. Role of oxygen vacancies on the performance of Li[Ni 0.5-xMn1.5+ x]O4 (x = 0, 0.05, and 0.08) spinel cathodes for lithium-ion batteries10.1021/cm301825h ↗
22. Understanding the impact of calcination time of high-voltage spinel Li1+xNi0.5Mn1.5O4 on structure and electrochemical behavior
23. Influence of electrolyte additives on the cathode electrolyte interphase (CEI) formation on LiNi1/3Mn1/3Co1/3O2 in half cells with Li metal counter electrode10.1016/j.jpowsour.2016.08.023 ↗
24. Surface and interface issues in spinel LiNi0.5Mn1.5O4: insights into a potential cathode material for high energy density lithium ion batteries10.1021/acs.chemmater.6b00948 ↗
25. Untersuchungen an elektronenleitenden Oxidsystemen. XXIII. Struktur und Eigenschaften stabiler Spinelle in den Reihen MzNiMn2−ZO4 (M=Li, Fe)
26. Influence of oxygen percentage in calcination atmosphere on structure and electrochemical properties of LiNi0.8Co0.1Mn0.1O2 cathode material for lithium-ion batteries10.1016/j.ceramint.2019.06.134 ↗
27. Decomposition of the fluoroethylene carbonate additive and the glue effect of lithium fluoride products for the solid electrolyte interphase: an ab initio study10.1039/C5CP07583A ↗
28. Understanding the capacity fading mechanism in LiNi0.5Mn 1.5O4/graphite Li-ion batteries10.1016/j.electacta.2012.12.069 ↗
29. Submicron single-crystalline LiNi0.5Mn1.5O 4 cathode with modulated Mn3+ content enabling high capacity and fast lithium-ion kinetics
30. The formation mechanism of fluorescent metal complexes at the LixNi0.5Mn1.5O4-δ/Carbonate ester electrolyte interface10.1021/ja5116698 ↗
31. Insight into the atomic structure of high-voltage spinel LiNi0.5Mn1.5O4 cathode material in the first cycle10.1021/cm503972a ↗
32. FEC as the additive of 5 V electrolyte and its electrochemical performance for LiNi0.5Mn1.5O410.1016/j.jelechem.2017.03.017 ↗
33. Recent advances in the electrolytes for interfacial stability of high-voltage cathodes in lithium-ion batteries10.1039/C4RA11575A ↗
34. Impact of lithium bis(oxalate)borate electrolyte additive on the performance of high-voltage spinel/graphite Li-ion batteries10.1021/jp408717x ↗
35. Beneficial influence of succinic anhydride as electrolyte additive on the self-discharge of 5 V LiNi0.4Mn1.6O4 cathodes10.1016/j.jpowsour.2013.02.030 ↗
36. Tris(trimethylsilyl)phosphite as electrolyte additive for high voltage layered lithium nickel cobalt manganese oxide cathode of lithium ion battery10.1016/j.electacta.2014.09.157 ↗
37. Effect of hexafluorophosphate and fluoroethylene carbonate on electrochemical performance and the surface layer of hard carbon for sodium-ion batteries10.1002/celc.201600365 ↗
38. A computational chemical insight into microscopic additive effect on solid electrolyte interphase film formation in sodium-ion batteries: suppression of unstable film growth by intact fluoroethylene carbonate10.1021/acs.jpcc.5b04206 ↗
39. Fluoroethylene carbonate as electrolyte additive for improving the electrochemical performances of high-capacity Li1.16[Mn0.75N0.25]0.84O2 material10.1016/j.electacta.2015.04.030 ↗
40. Evaluating the high-voltage stability of conductive carbon and ethylene carbonate with various lithium salts10.1149/1945-7111/abcabd ↗
41. Effects of solvent, lithium salt, and temperature on stability of carbonate-based electrolytes for 5.0 V LiNi0.5Mn1.5O4 electrodes10.1149/2.0201602jes ↗
42. Challenges and approaches for high-voltage spinel lithium-ion batteries10.1002/cphc.201400052 ↗
43. Formation of a cathode electrolyte interphase on high-voltage Li-ion cathodes10.1021/acs.chemmater.4c01872 ↗
44. Factors influencing the electrochemical properties of high-voltage spinel cathodes: relative impact of morphology and cation ordering10.1021/cm401496k ↗
45. Surface-oriented and nanoflake-stacked LiNi0.5Mn1.5O4 spinel for high-rate and long-cycle-life lithium ion batteries10.1039/c2jm33338d ↗
46. A truncated manganese spinel cathode for excellent power and lifetime in lithium-ion batteries10.1021/nl303619s ↗
47. Surface structural conversion and electrochemical enhancement by heat treatment of chemical pre-delithiation processed lithium-rich layered cathode material10.1016/j.jpowsour.2014.06.106 ↗
48. Surface reconstruction and chemical evolution of stoichiometric layered cathode materials for lithium-ion batteries10.1038/ncomms4529 ↗
49. Dynamic structural changes at LiMn2O4/electrolyte interface during lithium battery reaction10.1021/ja105389t ↗
50. Characterization of electrode/electrolyte interface with X-Ray reflectometry and epitaxial-film LiMn2O4 electrode10.1149/1.2778853 ↗
51. Morphological evolution of high-voltage spinel LiNi0.5Mn1.5O4 cathode materials for lithium-ion batteries: the critical effects of surface orientations and particle size10.1021/acsami.5b11389 ↗
52. Low-density TEOS-based silica aerogels prepared at ambient pressure using isopropanol as the preparative solvent10.1016/j.jallcom.2009.08.055 ↗
53. Layered intercalated architecture of Ni2V2O7 nanoparticle and N-Doped reduced graphene oxide composite sheet as an electrode material for solid-state asymmetric supercapacitor10.1016/j.jpowsour.2025.236931 ↗
54. Hollow spherical LiNi0.5Mn1.5O4 synthesized by a glucose-assisted hydrothermal method
55. Influence of different raw materials on the preparation of single-crystal LiNi0.5Mn1.5O4 by sol-gel method
56. LiNi0.5Mn1.5O4 porous micro-cubes synthesized by a facile oxalic acid co-precipitation method as cathode materials for lithium-ion batteries10.20964/2019.03.56 ↗
57. Synthesis of high-voltage spinel LiNi0.5Mn1.5O4 by Mn2O3 nanosheets for lithium-ion batteries with superior cycle life span
58. Tailoring disordered/ordered phases to revisit the degradation mechanism of high-voltage LiNi0.5Mn1.5O4 spinel cathode materials10.1002/adfm.202112279 ↗
59. Temperature-controlled synthesis of spinel lithium nickel manganese oxide cathode materials for lithium-ion batteries10.1016/j.ceramint.2020.05.124 ↗
60. The choice of organic acids as complexing agent affecting on the electrochemical properties of spinel LiNi0.5Mn1.5O410.1007/s10854-022-09001-2 ↗
61. Tuning the morphology and electronic properties of single-crystal LiNi0.5Mn1.5O4–δ: exploring the influence of LiCl-KCl molten salt flux composition and synthesis temperature10.1021/acs.inorgchem.0c01042 ↗
62. Chemical valence electron-engineered LiNi0.4Mn1.5MtO4 (Mt = Co and Fe) cathode materials with high-performance electrochemical properties
63. Preparing LiNi0.5Mn1.5O4 nanoplates with superior properties in lithium-ion batteries using bimetal-organic coordination-polymers as precursors10.1039/C4TA01147C ↗
64. A comparative study of Fd-3m and P4332 ‘LiNi0.5Mn1.5O410.1016/j.ssi.2011.04.007 ↗
65. Porous LiNi0.5Mn1.5O4 microspheres with different pore conditions: preparation and application as cathode materials for lithium-ion batteries10.1016/j.jpowsour.2014.03.047 ↗
66. Structural study of the li-mn-ni oxide pseudoternary system of interest for positive electrodes of Li-Ion batteries10.1021/cm4001619 ↗
67. High-power nanostructured LiMn2-xNixO4 high-voltage lithium-ion battery electrode materials: electrochemical impact of electronic conductivity and morphology10.1021/cm060729s ↗
68. Structure and insertion properties of disordered and ordered LiNi0.5Mn1.5O4 spinels prepared by wet chemistry10.1007/s11581-006-0021-7 ↗
69. Enabling a Co-free, high-voltage LiNi0.5Mn1.5O4 cathode in all-solid-state batteries with a halide electrolyte10.1021/acsenergylett.2c01397 ↗
70. Boosting cycling stability by regulating surface oxygen vacancies of LNMO by rapid calcination10.1007/s12274-023-6076-1 ↗
71. Enhancing reversibility of LiNi0.5Mn1.5O4 by regulating surface oxygen deficiency10.1002/cey2.338 ↗
72. Correlation between manganese dissolution and dynamic phase stability in spinel-based lithium-ion battery
73. One-step integrated surface modification to build a stable interface on high-voltage cathode for lithium-ion batteries10.1021/acsami.9b02996 ↗
74. Two-step hydrothermal synthesis of submicron Li1+xNi0.5Mn1.5O4−δ for lithium-ion battery cathodes (x = 0.02, δ = 0.12)10.1039/c2dt30351e ↗
75. Constructing tri-functional modification for spinel LiNi0.5Mn1.5O4 via fast ion conductor10.1016/j.jpowsour.2019.227677 ↗
76. Spinel LiNi0.5Mn1.5O4 cathode for rechargeable lithiumion batteries: Nano vs micro, ordered phase (P4332) vs disordered phase (Fd3m)10.1007/s12274-013-0343-5 ↗
77. Subtractive transformation of cathode materials in spent Li-ion batteries to a low-cobalt 5 V-class cathode material
78. Study of thermodynamic and kinetic behaviours of tin anode and its variation with state of charge, state of health and operating current rates of the battery10.1016/j.jelechem.2025.119001 ↗
79. Single crystal cathodes enabling high-performance all-solid-state lithium-ion batteries10.1016/j.ensm.2020.05.007 ↗
80. Phase transformation mechanism in lithium manganese nickel oxide revealed by single-crystal hard X-ray microscopy10.1038/ncomms14309 ↗
81. Octahedral and truncated high-voltage spinel cathodes: the role of morphology and surface planes in electrochemical properties10.1039/c3ta00682d ↗
82. Visualization of electrochemically driven solid-state phase transformations using operando hard X-ray spectro-imaging
83. Application of electrochemical impedance spectroscopy in Sn anode and lithium nickel manganese oxide cathode: understanding the state of charge and health of lithium ion battery as a function of temperature10.1002/ente.202500174 ↗
84. Different mechanical and electrochemical behavior between the two major Ni-rich cathode materials in Li-Ion batteries
85. LiNi0.4Mn1.6O4/Electrolyte and carbon black/electrolyte high voltage interfaces: to evidence the chemical and electronic contributions of the solvent on the cathode-electrolyte interface formation10.1149/2.052211jes ↗
86. Synergistic effect of fluorinated solvents for improving high voltage performance of LiNi0.5Mn1.5O4 cathode10.1149/1945-7111/abb34a ↗
87. Understanding transition-metal dissolution behavior in LiNi0.5Mn1.5O4 high-voltage spinel for lithium ion batteries10.1021/jp405158m ↗
88. Probing the electrode-electrolyte interface in cycled LiNi0.5Mn1.5O4 by XPS using Mg and synchrotron X-rays10.1149/2.0331614jes ↗
89. Facile molten salt synthesis of Li2NiTiO4 cathode material for Li-ion batteries