Maximising lithium battery performance by capacity balancing: Determining the Pareto fronts for electrode thickness and porosity
Source abstract
Abstract
Effective battery design is complex, requiring the resolution of multiple conflicting demands. Even where optimal electrode thickness, porosity, and architecture have been determined for isolated electrodes, designing optimal electrode parameters in full-cell configurations remains challenging. The performances of the positive and negative electrodes are linked due to the need to balance their capacities and complicated by differing rate-limiting mechanisms and ion transport asymmetries, under charge and discharge. This work develops a rational strategy for full-cell electrode design. First, validated, physics-based continuum models are used to determine Pareto fronts identifying best target negative and positive electrode thickness and porosity, under charge and discharge. The calculated ion concentrations provide a mechanistic understanding of the charge/discharge asymmetry. These Pareto fronts are then plotted in the areal capacity-volumetric energy density plane to identify the most effective electrode combinations. The approach is illustrated for a lithium-ion cell configuration using a graphite negative electrode and a LiNi 0.6 Mn 0.2 Co 0.2 O 2 positive electrode (Gr/NMC622) but can be generalised to other electrode pairs and battery chemistries.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Battery Technologies Research · Advancements in Battery Materials · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Modeling diffusion–induced stress on two-phase lithiation in lithium-ion batteries10.1016/j.euromechsol.2018.04.005 ↗
2. Impacts of negative to positive capacities ratios on the performance of next-generation lithium-ion batteries10.1016/j.electacta.2022.139878 ↗
3. A continuum of physics-based lithium-ion battery models reviewed10.1088/2516-1083/ac7d31 ↗
4. Electrode degradation in lithium-ion batteries10.1021/acsnano.9b04365 ↗
5. Edge-surface-inter carbon nanoarchitecture on silicon10.1021/acsnano.5c00371 ↗
6. Low-tortuosity and graded lithium ion battery cathodes by ice templating10.1039/C9TA07269A ↗
7. 3D correlative imaging of lithium ion concentration in a vertically oriented electrode microstructure with a density gradient10.1002/advs.202105723 ↗
8. Effects of capacity ratios between anode and cathode on electrochemical properties for lithium polymer batteries10.1016/j.electacta.2014.12.005 ↗
9. Effect of negative/positive capacity ratio on the rate and cycling performances of LiFePO4/graphite lithium-ion batteries10.1016/j.est.2018.07.012 ↗
10. Effect of N/P ratios on the performance of LiNi0.8Co0.15Al0.05O2||SiO/Graphite lithium-ion batteries10.1016/j.jpowsour.2019.227056 ↗
11. Extending the energy-power balance of Li-ion batteries using graded electrodes with precise spatial control of local composition10.1016/j.jpowsour.2022.231758 ↗
12. Micro-scale graded electrodes for improved dynamic and cycling performance of Li-ion batteries10.1016/j.jpowsour.2018.12.021 ↗
13. Extending the energy-power balance of Li-ion batteries using graded electrodes with precise spatial control of local composition10.1016/j.jpowsour.2022.231758 ↗
14. Advances in multi-scale design and fabrication processes for thick electrodes in lithium-ion batteries10.1016/j.enrev.2023.100066 ↗
15. Suitable thickness of carbon coating layers for silicon anode10.1016/j.carbon.2021.10.062 ↗
16. Development of advanced anodes for solid-state lithium batteries10.1016/j.mattod.2025.06.041 ↗
17. Roadmap on Li-ion battery manufacturing research
18. Narrowing the gap between theoretical and practical capacities in li‐ion layered oxide cathode materials10.1002/aenm.201602888 ↗
19. An approaching-theoretical-capacity anode material for aqueous battery: hollow hexagonal prism Bi2O3 assembled by nanoparticles10.1016/j.ensm.2020.02.027 ↗
20. Understanding limiting factors in thick electrode performance as applied to high energy density Li-ion batteries10.1007/s10800-017-1047-4 ↗
21. Understanding thickness and porosity effects on the electrochemical performance of LiNi0.6Co0.2Mn0.2O2-based cathodes for high energy Li-ion batteries10.1016/j.jpowsour.2019.02.060 ↗
22. Impact of particle size distribution on performance of lithium‐ion batteries10.1002/celc.202001249 ↗
23. Perspectives on strategies and techniques for building robust thick electrodes for lithium-ion batteries10.1016/j.jpowsour.2022.232176 ↗
24. Multiscale modelling methodologies of lithium-ion battery aging: a review of Most recent developments10.3390/batteries9090434 ↗
25. An electrochemical-irradiated plasticity model for metallic electrodes in lithium-ion batteries10.1016/j.ijplas.2016.10.009 ↗
26. Design strategies for high power vs. high energy lithium ion cells10.3390/batteries5040064 ↗
27. Review of parameterisation and a novel database (LiionDB) for continuum Li-ion battery models10.1088/2516-1083/ac692c ↗
28. Challenges and strategies of fast-charging Li-Ion batteries with a focus on Li plating10.34133/energymatadv.0113 ↗
29. Recent insights into rate performance limitations of li‐ion batteries10.1002/batt.202000227 ↗
30. A systematic study of thick electrodes for high energy lithium ion batteries10.1016/j.jelechem.2016.10.040 ↗
31. Clarifying the limiting factor of material utilization in thick electrodes of lithium-ion batteries10.1016/j.jpowsour.2023.233880 ↗
32. Analysis of rate-limiting factors in thick electrodes for electric vehicle applications10.1149/2.0571803jes ↗
33. Understanding the limitations of lithium ion batteries at high rates10.1016/j.jpowsour.2021.229690 ↗
34. Modelling optimum thickness and architecture for lithium-ion battery cathodes10.1016/j.jpowsour.2024.235005 ↗
35. Areal capacity balance to maximize the lifetime of layered oxide/hard carbon sodium-ion batteries10.1016/j.jpowsour.2024.235599 ↗
36. Safety, high-performing and effects of the N/P ratio of a solid lithium ion battery using PEGDME based polymer electrolytes10.1016/j.heliyon.2023.e13292 ↗
37. Pareto multi objective optimization
38. Comprehensive insights into the porosity of lithium-ion battery electrodes: a comparative study on positive electrodes based on LiNi0.6Mn0.2Co0.2O2 (NMC622)10.3390/batteries7040070 ↗
39. Optimization of pore characteristics of graphite-based anode for Li-Ion batteries by control of the particle size distribution10.3390/ma16216896 ↗
40. 3D detection of lithiation and lithium plating in graphite anodes during fast charging10.1021/acsnano.1c02942 ↗
41. Onset of lithium plating in fast-charging Li-Ion batteries10.1021/acsenergylett.5c00322 ↗
42. Modelling optimum thickness and architecture for lithium-ion battery cathodes10.1016/j.jpowsour.2024.235005 ↗
43. Revealing the rate-limiting electrode of lithium batteries at high rates and mass loadings10.1016/j.cej.2022.138275 ↗
44. Diffusion‐limited C‐rate: a fundamental principle quantifying the intrinsic limits of li‐ion batteries10.1002/aenm.201902523 ↗
45. Fast charging of lithium‐ion batteries: a review of materials aspects10.1002/aenm.202101126 ↗
46. Zinc-regulated hard carbon as a sodium-ion battery anode material10.1016/j.jpowsour.2025.236798 ↗
47. Advanced nanoparticle coatings for stabilizing layered Ni‐rich oxide cathodes in solid‐state batteries
48. Characterization of slurries for lithium-ion battery cathodes by measuring their flow and change in hydrostatic pressure over time and clarification of the relationship between slurry and cathode properties10.1016/j.jcis.2022.08.192 ↗
49. A comprehensive experimental and modeling study on dissolution in Li-Ion batteries10.1149/2.0111908jes ↗
50. S. W. Hair, ‘Beyond slurry cast: patterning of a monolithic active material sheet to form free-standing, solvent-free, and low-tortuosity battery electrodes’, OPEN ACCESS.