Quantifying the ionic conductivity of redox active zinc slurry electrodes using electrochemical impedance spectroscopy
Source abstract
Abstract
The electrochemical performance of the Zinc slurry anode in Zn-MnO 2 batteries is limited by its ionic conductivity, which leads to incomplete discharge and reduced utilization of Zinc. Such limitations can be addressed by increasing the slurry ionic conductivity, but the coupled ion and electron charge transfer in these slurries at high zinc mass fractions makes existing methods insufficient to measure the ionic conductivity in isolation. In this work, a new methodology is presented to better understand and quantify the ionic conductivity in Zn slurries. Three types of solids are used to make slurries: Zn (conductive, redox active), carbon (conductive, non-redox active) and SiO 2 (non-conductive, non-redox active). The method uses electrochemical impedance spectroscopy (EIS) over a wide range of mass fractions, followed by data deconvolution, fitting to Archie's law, and using the resulting correlation to extrapolate to the true value at the Zn slurry composition of interest. It is shown that the effective ionic conductivity of Zinc slurries in Zn-MnO 2 batteries is significantly lower than the ionic conductivity of the KOH gelled electrolyte.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced battery technologies research · Advancements in Battery Materials · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Design of a slurry electrode reactor system10.1023/A:1018443705541 ↗
2. Effects of flow cell design on charge percolation and storage in the carbon slurry electrodes of electrochemical flow capacitors10.1016/j.jpowsour.2013.08.101 ↗
3. Current density scaling in electrochemical flow capacitors10.1149/2.0031507jes ↗
4. The electrochemical flow capacitor: a new concept for rapid energy storage and recovery10.1002/aenm.201100768 ↗
5. Improved slurry zinc/air systems as batteries for urban vehicle propulsion10.1007/BF01006848 ↗
6. Li
7. Circulating zinc/air battery: a practical vehicle power source10.1016/0378-7753(76)80003-1 ↗
8. Maximizing energetic efficiency in flow batteries utilizing non-newtonian fluids10.1149/2.011404jes ↗
9. Surfactant for enhanced rheological, electrical, and electrochemical performance of suspensions for semisolid redox flow batteries and supercapacitors10.1002/cplu.201402042 ↗
10. Electronic vs ionic limitations to electrochemical performance in Li 4 Ti 5 O 12 -Based organic suspensions for lithium-redox flow batteries10.1149/2.035405jes ↗
11. Semi-solid lithium rechargeable flow battery10.1002/aenm.201100152 ↗
12. Characterizing slurry electrodes using electrochemical impedance spectroscopy10.1149/2.0011601jes ↗
13. Statistical approach to design Zn particle size, shape, and crystallinity for alkaline batteries10.1007/s11708-024-0904-1 ↗
14. Engineering zinc slurry anodes for high-performance primary alkaline batteries10.1016/j.jpowsour.2024.234818 ↗
15. Electronical conductivity improvement of carbon-based slurry electrodes using carbon foams for enhanced performance in advanced electrochemical energy storage systems10.1021/acsomega.3c00278 ↗
16. The conductance of suspensions with conducting particles10.1007/BF01024142 ↗
17. Preliminary study of high energy density Zn/Ni flow batteries10.1016/j.jpowsour.2015.06.110 ↗
18. Understanding the dynamics of primary Zn-MnO 2 alkaline battery gassing with operando visualization and pressure cells10.1149/2.0321811jes ↗
19. Studies with porous zinc electrodes with additives for secondary alkaline batteries10.1016/S0378-7753(98)00096-2 ↗
20. Improvement of high-rate capability of alkaline Zn-MnO 2 battery10.1016/S0378-7753(02)00354-3 ↗
21. Structural modifications and ionic transport of PVA-KOH hydrogels applied in Zn/Air batteries10.1016/j.jelechem.2019.113380 ↗
22. All-solid-state Al-air batteries with polymer alkaline gel electrolyte10.1016/j.jpowsour.2013.11.020 ↗
23. Electrical conductivity measurements of aqueous and immobilized potassium hydroxide
24. Ionic conduction in porous media10.1149/1.2086345 ↗
25. Tortuosity of composite porous electrodes with various conductive additives in an alkaline System10.1149/2.0911713jes ↗
26. Direct measurements of effective ionic transport in porous Li-Ion electrodes10.1149/2.062302jes ↗
27. On the origin and application of the Bruggeman correlation for analysing transport phenomena in electrochemical systems10.1016/j.coche.2016.02.006 ↗
28. Müller
29. Separating electronic and ionic conductivity in mix-conducting layered lithium transition-metal oxides10.1016/j.jpowsour.2018.05.005 ↗
30. Preparation and electrochemical characterization of the alkaline polymer gel electrolyte polymerized from acrylic acid and KOH solution10.1016/j.electacta.2004.02.008 ↗
31. Experimental Study of electronic and ionic conductivity of a carbon-based slurry electrode used in advanced electrochemical energy systems10.1021/acsaem.2c01875 ↗