Highly-cyclable Na-ion battery exploiting a nanostructured tin-carbon anode, layered-oxide P3/P2 cathode and a glyme-based electrolyte
Source abstract
Abstract
Alternative materials to (purely) carbon-based anodes could enhance the energy density of sodium-ion batteries, and thus favor their complementarity to lithium-ion batteries. This work provides a viable setup of Na-ion cells combining a P3/P2 sodium-deficient layered cathode and a tin-carbon Na-alloying anode with a glyme-based electrolyte. Galvanostatic cycling in sodium half-cells of the water-processed alloying anode with sodium carboxymethyl cellulose (CMC) binder shows a maximum capacity of ∼260 mAh g −1 , a capacity retention exceeding 70 % after 150 cycles, and an average Coulombic efficiency over 99 %. The multi-metal cathode evidences a great cycling stability over 100 cycles, with average Coulombic efficiency between 99.5 and 99.6 % as favored by the presence of Al 3+ ions in its structure. Full Na-ion batteries exploiting ad hoc chemically-sodiated tin-based anode and sodium-deficient layered cathode operate with average working voltage of 3 V, and maximum capacity of 120 mAh g −1 retained for 95 % over 100 cycles in the best experimental setup. The rationally designed full-cell reaches theoretical energy density between 310 and 250 Wh kg −1 as referred to the cathode weight.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Fiber-reinforced polymer composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (88)
Show source-provided references
1. Lithium rocking chair batteries: an old concept?10.1149/1.2068978 ↗
2. Challenges of today for Na-based batteries of the future: from materials to cell metrics10.1016/j.jpowsour.2020.228872 ↗
3. Na-ion versus Li-ion batteries: complementarity rather than competitiveness10.1016/j.joule.2020.06.003 ↗
4. Post-lithium-ion battery cell production and its compatibility with lithium-ion cell production infrastructure10.1038/s41560-020-00748-8 ↗
5. A cost and resource analysis of sodium-ion batteries10.1038/natrevmats.2018.13 ↗
6. Cell design and chemistry of commercial sodium-ion battery cells10.1016/j.jpowsour.2025.236496 ↗
7. Critically assessing sodium-ion technology roadmaps and scenarios for techno-economic competitiveness against lithium-ion batteries10.1038/s41560-024-01701-9 ↗
8. Promise and reality of post-lithium-ion batteries with high energy densities10.1038/natrevmats.2016.13 ↗
9. Evaluation of commercial 18650 and 26700 sodium-ion cells and comparison with well-established lithium-ion cells10.1016/j.powera.2024.100148 ↗
10. Practical cathodes for sodium‐ion batteries: who will take The Crown?10.1002/aenm.202301975 ↗
11. The cathode choice for commercialization of sodium‐ion batteries: layered transition metal oxides versus prussian blue analogs
12. Reviving ether-based electrolytes for sodium-ion batteries10.1039/D5EE00725A ↗
13. Electrolyte chemistry development for sodium‐based batteries: a blueprint from lithium or a step toward originality?
14. Ether-based electrolytes for sodium ion batteries10.1039/D1CS00948F ↗
15. Electrolyte solvation structure design for sodium ion batteries10.1002/advs.202201207 ↗
16. Electrolytes for sodium ion batteries: the Current transition from liquid to solid and hybrid systems10.1002/adma.202313572 ↗
17. Why is sodium-intercalated graphite unstable?10.1039/C7RA06777A ↗
18. Negative electrodes for Na-ion batteries10.1039/c4cp00826j ↗
19. Sodium intercalation chemistry in graphite10.1039/C5EE02051D ↗
20. Hard carbons for sodium-ion batteries: structure, analysis, sustainability, and electrochemistry10.1016/j.mattod.2018.12.040 ↗
21. Assessing the role of morphological changes as the origin of improved cycling stability of Sn-based anodes for sodium-ion batteries10.1039/D5TA03000E ↗
22. Restructuring of sodium-lead alloys during charge-discharge cycling in sodium-ion batteries10.1149/1945-7111/ad9bf0 ↗
23. A high rate and long-cycle-life anode based on micrometer-sized Pb powder for sodium-ion batteries10.1016/j.jallcom.2021.161240 ↗
24. Phosphorus Electrodes in sodium cells: small volume expansion by sodiation and the surface‐stabilization mechanism in aprotic solvent10.1002/celc.201300149 ↗
25. Red-phosphorus-impregnated carbon nanofibers for sodium-ion batteries and liquefaction of red phosphorus10.1038/s41467-020-16077-z ↗
26. A high-performance sodium-ion full cell with a layered oxide cathode and a phosphorous-based composite anode10.1149/2.0931702jes ↗
27. Unique Na5−xSbSe phase enables high‐rate performance of Sb2Se3 anodes in Na‐Ion batteries10.1002/aenm.202501433 ↗
28. The reaction mechanism of FeSb2 as anode for sodium-ion batteries10.1039/c4cp00738g ↗
29. Role of silicon as structural stabilizer and redox-active element in multicomponent (Sn, Sb, Fe, Si) alloy electrodes for Na-ion batteries10.1002/batt.202400690 ↗
30. Microsized Sn as advanced anodes in glyme‐based electrolyte for Na‐Ion batteries10.1002/adma.201603212 ↗
31. Prospects in anode materials for sodium ion batteries - a review10.1016/j.rser.2019.109549 ↗
32. Peering into alloy anodes for sodium‐ion batteries: current trends, challenges, and opportunities10.1002/adfm.201808745 ↗
33. Reversible insertion of sodium in tin10.1149/2.037211jes ↗
34. Colossal reversible volume changes in lithium alloys10.1149/1.1388178 ↗
35. Practical alloy-based negative electrodes for Na-ion batteries10.1149/1945-7111/ad5e64 ↗
36. Redox reaction of Sn-polyacrylate electrodes in aprotic Na cell10.1016/j.elecom.2012.05.017 ↗
37. Tin‐Based anode materials for stable sodium storage: progress and perspective
38. Alternative binders for sustainable electrochemical energy storage – the transition to aqueous electrode processing and bio-derived polymers10.1039/C8EE00640G ↗
39. Hard carbon key properties allow for the achievement of high Coulombic efficiency and high volumetric capacity in Na-ion batteries10.1039/D0TA07687B ↗
40. Recent advances of high‐rate hard carbon anodes for sodium‐ion batteries: correlations between performance and microstructure
41. Degradation of layered oxide cathode in a sodium battery: a detailed investigation by X‐Ray Tomography at the nanoscale
42. Insight on the enhanced reversibility of a multimetal layered oxide for sodium-ion battery10.1021/acs.jpcc.8b07596 ↗
43. Toward high energy density cathode materials for sodium-ion batteries: investigating the beneficial effect of aluminum doping on the P2-type structure10.1039/C6TA08667E ↗
44. High-energy and long-life O3-type layered cathode material for sodium-ion batteries10.1038/s41467-025-58637-1 ↗
45. High-voltage stability of O3-type sodium layered cathode enabled by preferred occupation of Na in the OP2 phase
46. Boron-doped sodium layered oxide for reversible oxygen redox reaction in Na-ion battery cathodes10.1038/s41467-021-25610-7 ↗
47. A universal strategy toward air‐stable and high‐rate O3 layered oxide cathodes for Na‐Ion batteries10.1002/adfm.202111466 ↗
48. High capacity O3-Type Na[Li0.05(Ni0.25Fe0.25Mn0.5)0.95]O 2 cathode for sodium ion batteries10.1021/cm502481b ↗
49. Exploration of phase compositions, crystal structures, and electrochemical properties of Nax Fey Mn1– y O2 sodium ion battery materials10.1021/acs.chemmater.8b01566 ↗
50. O3‐Type cathodes for sodium‐ion batteries: recent advancements and future perspectives10.1002/batt.202300618 ↗
51. P3 Na0.9Ni0.5Mn0.5O2 cathode material for sodium ion batteries10.1021/acs.chemmater.8b03270 ↗
52. High performance Na0.5[Ni0.23Fe0.13Mn0.63]O2 cathode for sodium-ion batteries10.1002/aenm.201400083 ↗
53. Stable layered P3/P2 Na0.66Co0.5Mn0.5O2 cathode materials for sodium-ion batteries10.1039/C5TA05205J ↗
54. P2/P3 Biphasic layered oxide cathode enabled by additional electron-holes on oxygen for high-capacity sodium-ion batteries10.1016/j.jmst.2025.02.072 ↗
55. An ordered P2/P3 composite layered oxide cathode with long cycle life in sodium-ion batteries10.1021/acsmaterialslett.9b00347 ↗
56. A P2/P3 composite-layered cathode material with low-voltage decay for sodium-ion batteries10.1007/s10800-020-01522-0 ↗
57. Nanostructured Sn–C composite as an advanced anode material in high-performance lithium-ion batteries10.1002/adma.200700748 ↗
58. A nanostructured Sn-C composite lithium battery electrode with unique stability and high electrochemical performance10.1002/adma.200702928 ↗
59. A package for impedance/admittance data analysis10.1016/0167-2738(86)90100-1 ↗
60. A nonlinear least squares Fit procedure for analysis of immittance data of electrochemical systems10.1016/0167-2738(86)90031-7 ↗
61. Ultrasmall tin nanodots embedded in nitrogen-doped mesoporous carbon: Metal-Organic-Framework derivation and electrochemical application as highly stable anode for lithium ion batteries10.1016/j.electacta.2016.08.051 ↗
62. In situ transmission electron microscopy study of electrochemical sodiation and potassiation of carbon nanofibers10.1021/nl500970a ↗
63. Alternative materials for sodium ion–sulphur batteries10.1039/c3ta10241f ↗
64. Nanostructured Na-ion and Li-ion anodes for battery application: a comparative overview10.1007/s12274-017-1513-7 ↗
65. Investigating sodium storage mechanisms in tin anodes: a combined pair distribution function analysis, density functional theory, and solid-state NMR approach10.1021/jacs.7b01398 ↗
66. Rooting binder-free tin nanoarrays into copper substrate via tin-copper alloying for robust energy storage10.1038/s41467-020-15045-x ↗
67. A high-energy-density sodium-ion full battery based on tin anode10.1007/s11426-018-9422-y ↗
68. Designing tin and hard carbon Architecture for stable Sodium‐Ion battery anode10.1002/sstr.202400367 ↗
69. Electrochemical performance of porous Carbon/Tin composite anodes for sodium‐ion and lithium‐ion batteries10.1002/aenm.201200346 ↗
70. Chemical approach to achieve sodiated alloying anode for direct application in Na-ion battery10.1016/j.materresbull.2025.113546 ↗
71. Highly efficient, cost effective, and safe sodiation agent for high‐performance Sodium‐Ion batteries10.1002/cssc.201801099 ↗
72. High‐Efficiency cathode sodium compensation for sodium‐ion batteries10.1002/adma.202001419 ↗
73. NaN 3 addition, a strategy to overcome the problem of sodium deficiency in P2-Na0.67[Fe0.5Mn0.5]O2 cathode for sodium-ion battery10.1016/j.jpowsour.2016.10.084 ↗
74. An approach to overcome first cycle irreversible capacity in P2-Na2/3[Fe1/2Mn1/2]O210.1016/j.elecom.2013.10.008 ↗
75. Improved sodiation additive and its nuances in the performance enhancement of sodium-ion batteries10.1021/acsami.0c20542 ↗
76. Scalable li‐ion battery with Metal/Metal oxide sulfur cathode and lithiated silicon Oxide/Carbon anode10.1002/cssc.202400615 ↗
77. Unlocking the potential of phosphorus anodes for sodium‐ion batteries via tailored reversible Na/Polyphosphide chemistry
78. Plating onset detection and optimized charging profiles for lithium- and sodium-ion batteries10.1016/j.electacta.2025.146703 ↗
79. Impact of sodium metal plating on cycling performance of layered Oxide/Hard carbon sodium-ion pouch cells with different voltage cut-offs10.1149/1945-7111/ace4fa ↗
80. Electrolytes and Electrolyte/Electrode interfaces in sodium‐ion batteries: from scientific research to practical application10.1002/adma.201808393 ↗
81. Improved low‐temperature performance of Rocking‐Chair Sodium‐Ion hybrid capacitor by mitigating the de‐solvation energy and interphase resistance
82. Solvation of NaPF 6 in diglyme solution for battery electrolytes10.1002/batt.202000144 ↗
83. Diglyme based electrolytes for sodium-ion batteries10.1021/acsaem.8b00360 ↗
84. A comparative Study of layered transition metal oxide cathodes for application in sodium-ion battery10.1021/am5080437 ↗
85. Solvent co-intercalation in layered cathode active materials for sodium-ion batteries10.1038/s41563-025-02287-7 ↗
86. Layered oxide cathodes for sodium-ion batteries: storage mechanism, electrochemistry, and techno-economics10.1021/acs.accounts.2c00690 ↗
87. Information dense and industry scalable accelerated Formation10.1002/aidi.202500025 ↗
88. An electrochemical Study on the impact of charging parameters on the electrochemical performance of alloy‐based C/Sn composite anodes for sodium‐ion batteries10.1002/batt.202500340 ↗