Biological bipolar electrodes for bioelectrochemical systems: A proof of concept
Source abstract
Abstract
This study presents a proof of concept for a novel monolithic bipolar electrode (BE) that is biologically activated on both faces for application in bioelectrochemical systems. The BE was fabricated using 3D techniques using a PLA/carbon-black composite and subsequently functionalized through electrochemical deposition of graphene oxide to enhance surface conductivity. Two stacked configurations (replicates), each comprising two serially connected chambers via a single BE, were constructed and biologically activated in situ . Polarization tests on the individual sides of the BEs showed sustained current generation on both faces: the anodic side reached up to 0.40 A m −2 , while the cathodic side exhibited stable but slower current development. Whole-stack polarization tests demonstrated current densities up to ∼0.5 A m −2 at 3.0 V, with performance limited by the cathodic side of the BE. Microbiological analysis confirmed the colonization of both electrode faces by electroactive microbial consortia. Overall, this study demonstrates, for the first time, the feasibility of using fully biocatalyzed, monolithic BEs in bioelectrochemical systems, to enable compact, modular stack designs with minimized electrical interconnections, reduced volumetric footprint, and simplified assembly. • Novel bipolar electrode supports biofilm growth on both active surfaces. • 3D-printed stack design improves compactness and scalability in BES. • Combined electrochemical and microbial validation of performance. • Stack operated in batch shows stable and reproducible current output. • Compact architecture Favors practical application and scale-up.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microbial Fuel Cells and Bioremediation · Electrochemical sensors and biosensors · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Value added products from wastewater using bioelectrochemical systems: current trends and perspectives10.1016/j.jwpe.2020.101737 ↗
2. Status update on bioelectrochemical systems: prospects for carbon electrode design and Scale-Up
3. Factors affecting the efficiency of a bioelectrochemical system: a review10.1039/C9RA03605A ↗
4. Scale-up of the bioelectrochemical system: strategic perspectives and normalization of performance indices10.1016/j.biortech.2022.127935 ↗
5. A data-driven approach to evaluate performance trends across different scales of bioelectrochemical systems10.1016/j.cej.2025.164918 ↗
6. Scaling up microbial fuel cells10.1021/es800775d ↗
7. Microbial fuel cells—challenges and applications10.1021/es0627592 ↗
8. Microbial fuel cells based on carbon veil electrodes: stack configuration and scalability10.1002/er.1419 ↗
9. Miniature microbial fuel cells and stacks for urine utilisation10.1016/j.ijhydene.2012.09.062 ↗
10. MFC-cascade stacks maximise COD reduction and avoid voltage reversal under adverse conditions10.1016/j.biortech.2013.01.119 ↗
11. From the lab to the field: Self-stratifying microbial fuel cells stacks directly powering lights10.1016/j.apenergy.2020.115514 ↗
12. Estimating microbial electrolysis cell (MEC) investment costs in wastewater treatment plants: case study10.1016/j.ijhydene.2012.09.157 ↗
13. Effect of terminal design and bipolar plate material on PEM fuel cell performance10.4236/sgre.2013.41006 ↗
14. Effects of different channel geometries of metallic bipolar plates on Proton exchange membrane fuel cell performance10.3390/en16237702 ↗
15. Development of bipolar plate stack type microbial fuel cells10.5012/bkcs.2006.27.2.281 ↗
16. Analysis and improvement of a Scaled-Up and stacked microbial fuel cell10.1021/es901939r ↗
17. New architecture for modulization of membraneless and single-chambered microbial fuel cell using a bipolar plate-electrode assembly (BEA)10.1016/j.bios.2014.02.063 ↗
18. 3D printed components of microbial fuel cells: towards monolithic microbial fuel cell fabrication using additive layer manufacturing10.1016/j.seta.2016.11.006 ↗
19. Leveraging 3D printing in microbial electrochemistry research: current progress and future opportunities10.1007/s11783-025-1921-y ↗
20. 3D-Printed conductive polymers as alternative for bioelectrochemical systems electrodes: Abiotic Study and biotic Start-Up
21. Microbial community analysis of a methane-producing biocathode in a bioelectrochemical system10.1155/2013/481784 ↗
22. QIIME allows analysis of high-throughput community sequencing data10.1038/nmeth.f.303 ↗
23. Naïve Bayesian classifier for rapid assignment of rRNA sequences into the new bacterial taxonomy10.1128/AEM.00062-07 ↗
24. Microbial electrolysis cells: an emerging technology for wastewater treatment and energy recovery. From laboratory to pilot plant and beyond10.1016/j.rser.2015.11.029 ↗
25. Biogas upgrading by hydrogenotrophic methanogens: an overview10.1007/s12649-022-01888-6 ↗
26. Graphene oxide electrodeposited electrode enhances start-up and selective enrichment of exoelectrogens in bioelectrochemical systems10.1038/s41598-017-14200-7 ↗
27. Nickel-based electrodeposits as potential cathode catalysts for hydrogen production by microbial electrolysis10.1016/j.jpowsour.2017.02.066 ↗
28. Mechanistic stratification in electroactive biofilms of Geobacter sulfurreducens mediated by pilus nanowires10.1038/ncomms12217 ↗
29. Understanding the limitations of substrate degradation in bioelectrochemical systems10.3389/fmicb.2024.1511142 ↗
30. Cathodic biofilms – a prerequisite for microbial electrosynthesis10.1016/j.biortech.2022.126788 ↗
31. Fundamentals, applications, and future directions of bioelectrocatalysis10.1021/acs.chemrev.0c00472 ↗
32. Linking bacterial metabolism to graphite cathodes: electrochemical insights into the H2-Producing capability of desulfovibrio sp10.1002/cssc.201100720 ↗
33. Optimization of soil microbial fuel cell for sustainable bio-electricity production: combined effects of electrode material, electrode spacing, and substrate feeding frequency on power generation and microbial community diversity10.1186/s13068-022-02224-9 ↗
34. Influence of carbon-based cathodes on biofilm composition and electrochemical performance in soil microbial fuel cells10.1016/j.ese.2023.100276 ↗
35. Bioelectrochemical systems: an outlook for practical applications10.1002/cssc.201100732 ↗
36. Recent advances in scaling up bioelectrochemical systems: a review10.3390/biotech14010008 ↗
37. Hydrogel-derived materials for microbial fuel cell10.1016/j.jpowsour.2024.235688 ↗
38. Functional nanomaterial-modified anodes in microbial fuel cells: advances and perspectives
39. Purposely designed hierarchical porous electrodes for high rate microbial electrosynthesis of acetate from carbon dioxide10.1021/acs.accounts.9b00523 ↗
40. Scale-up of bioelectrochemical systems for energy valorization of waste streams
41. A mini-review on applications of 3D printing for microbial electrochemical technologies10.3389/fenrg.2021.679061 ↗
42. In situ probing the mass transport property inside an imitated three-dimensional porous bioelectrode10.1021/acs.est.2c09786 ↗
43. Microbial Fuel Cell stack performance enhancement through carbon veil anode modification with activated carbon powder10.1016/j.apenergy.2019.114475 ↗