journal article·2026-02Open access

N-doped CNTs grafted on manganese oxide for enhanced rate performance of lithium-ion battery anodes

Seongmin Shin, Hwidon Jeong, Soojin Han, Dae Soo Jung, Jinyoung Chun, Yun Chan Kang, Jung Hyun Kim

Abstract

A rational design strategy involving compositing with conductive materials is crucial in increasing the electrical conductivity and structural stability of anode materials for enhanced lithium-ion batteries. In this study, hierarchical N-doped carbon nanotubes (CNTs) grafted onto a manganese oxide anode for high-rate performance lithium-ion battery is prepared via a spray pyrolysis process, followed by catalytic chemical vapor deposition (CCVD). The uniformly grown N-doped CNTs on the surface of the manganese oxide anode significantly improve the electron transport without isolating the active material, resulting in excellent electrochemical performance. The optimized electrode exhibits a high discharge capacity of 349.8 mA h g −1 at 5 A g −1 and excellent cycling stability, maintaining 553.6 mA h g −1 after 1000 cycles at 1 A g −1 . These results demonstrate the potential of the N-doped CNT-manganese oxide composites as high-performance anode materials for enhanced lithium-ion batteries.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (62)

Show source-provided references
1. High-energy lithium-ion batteries: recent progress and a promising future in applications10.1002/eem2.12450 ↗
2. Lithium-ion batteries: outlook on present, future, and hybridized technologies10.1039/C8TA10513H ↗
3. Future high-energy density anode materials from an automotive application perspective10.1039/C7TA03108D ↗
4. Toward practical high‐energy and high‐power lithium battery anodes: present and future10.1002/advs.202105213 ↗
5. Anode materials for lithium-ion batteries: a review10.1016/j.apsadv.2022.100233 ↗
6. Recent progress on nanostructured transition metal oxides as anode materials for lithium-ion batteries10.1007/s11664-022-09662-z ↗
7. Transition metal oxide anodes for electrochemical energy storage in Lithium- and sodium-ion batteries10.1002/aenm.201902485 ↗
8. Spherical-graphite/nano-Mn2O3 composites as advanced anode materials for lithium half/full batteries10.1016/j.jallcom.2020.157109 ↗
9. Carbon nanoparticle-entrapped macroporous Mn3O4 microsphere anodes with improved cycling stability for Li-ion batteries10.1038/s41598-022-16383-0 ↗
10. Porous MnO/pitch carbon composite as an anode material for low-cost and high-performance lithium-ion battery10.1016/j.ces.2023.119625 ↗
11. Freestanding conversion-type anode via one-pot formation for flexible Li-ion battery10.1016/j.cej.2021.130937 ↗
12. Recent advances in Mn-based oxides as anode materials for lithium ion batteries10.1039/C4RA02686A ↗
13. Deciphering the storage mechanism of biochar anchored with different morphology Mn3O4 as advanced anode material for lithium-ion batteries10.1016/j.jcis.2024.05.044 ↗
14. Ce-doped Mn3O4 as high-performance anode material for lithium ion batteries10.1016/j.jallcom.2019.152348 ↗
15. Nanoparticles constructed mesoporous coral-like Mn2O3 as high performance anode for lithium-ion batteries10.1016/j.ceramint.2022.05.349 ↗
16. Flexible Mn3O4/MXene films with 2D–2D architectures as stable and ultrafast anodes for Li-Ion batteries10.1021/acsami.2c11577 ↗
17. Recent trends in graphene based transition metal oxides as anode materials for rechargeable lithium-ion batteries10.1016/j.nwnano.2023.100004 ↗
18. Novel hoberman sphere design for interlaced Mn3O4@CNT architecture with atomic layer deposition-coated TiO2 overlayer as advanced anodes in Li-Ion battery10.1021/acsami.0c11282 ↗
19. Facile synthesis of three-dimensional interconnected MnO/CNTs composite as anode materials for high-performance lithium-ion batteries10.1016/j.jelechem.2018.02.002 ↗
20. A review on applications and challenges of carbon nanotubes in lithium-ion battery10.1002/cey2.643 ↗
21. Binder-assisted dispersion of agglomerated carbon nanotubes for efficiently establishing conductive networks in cathodes of Li-Ion batteries10.1002/ente.202000589 ↗
22. Fabrication of Si/N-doped carbon nanotube composite via spray drying followed by catalytic chemical vapor deposition10.1016/j.jallcom.2023.168743 ↗
23. In situ synthesis of carbon nanotubes for constructing highly conductive networks in lithium iron phosphate to enhance electrochemical performance10.1016/j.jallcom.2025.179421 ↗
24. Direct synthesis of carbon nanotubes on metallic foams as a cathode material with high mass load for lithium–air batteries10.1039/C7RA04886F ↗
25. Aerosol-assisted synthesis of 3D hybridized reduced graphene oxide-carbon nanotube composite microsphere with cobalt-iron selenide nanocrystal as anode materials for potassium-ion batteries10.1016/j.est.2024.110683 ↗
26. Synergistic regulation of polysulfides conversion and deposition by MOF-derived hierarchically ordered carbonaceous composite for high-energy lithium–sulfur batteries10.1002/adfm.201900875 ↗
27. Structure, functional composition and electrochemical properties of nitrogen-doped multi-walled carbon nanotubes synthesized using Co–Mo, Ni–Mo and Fe–Mo catalysts10.1016/j.matchemphys.2020.123563 ↗
28. Nitrogen-doped graphene nanosheets with excellent lithium storage properties10.1039/c1jm00049g ↗
29. Control of carbon nanotube growth using cobalt nanoparticles as catalyst10.1016/j.apsusc.2004.11.059 ↗
30. Systematic review of catalyst nanoparticles synthesized by solution process: towards efficient carbon nanotube growth10.1007/s10971-014-3600-5 ↗
31. Advances in nanostructures fabricated via spray pyrolysis and their applications in energy storage and conversion10.1039/C8CS00904J ↗
32. A rapid synthesis of mesoporous Mn2O3 nanoparticles for supercapacitor applications10.3390/coatings9100631 ↗
33. Yolk–shell-structured manganese oxide/nitride composite powders comprising cobalt-nanoparticle-embedded nitrogen-doped carbon nanotubes as cathode catalysts for long-life-cycle lithium–oxygen batteries10.1016/j.cej.2019.05.020 ↗
34. Temperature-dependent synthesis of Mn3O4 nanostructures by microwave irradiation method for high-performance supercapacitors10.1002/er.7284 ↗
35. Synthesis, characterization and microwave transparent properties of Mn3O4 microspheres10.1007/s10854-019-01201-7 ↗
36. MnO/reduced graphene oxide sheet hybrid as an anode for Li-ion batteries with enhanced lithium storage performance10.1016/j.jpowsour.2012.05.084 ↗
37. MnO nanoparticles@continuous carbon nanosheets for high performance lithium ion battery anodes10.1016/j.matlet.2016.12.021 ↗
38. One-step wet-spinning assembly of twisting-structured graphene/carbon nanotube fiber supercapacitor10.1016/j.jechem.2020.02.023 ↗
39. Synthesis of uniquely structured yolk–shell metal oxide microspheres filled with nitrogen-doped graphitic carbon with excellent Li–Ion storage performance10.1002/smll.201701585 ↗
40. Hydrothermal synthesis of manganese oxides/carbon nanotubes composites as anode materials for lithium ion batteries10.1016/j.materresbull.2013.05.041 ↗
41. High resolution XPS characterization of chemical functionalised MWCNTs and SWCNTs10.1016/j.carbon.2004.08.033 ↗
42. Nitrogen-doped vertical graphene for highly efficient hydrogen peroxide electrosynthesis in acidic environment10.1016/j.cej.2024.154221 ↗
43. Ru single atoms on N-Doped carbon by spatial confinement and ionic substitution strategies for high-performance Li–O2 batteries10.1021/jacs.0c07317 ↗
44. Graphitic N-doped graphene via solution plasma with a single dielectric barrier10.1016/j.carbon.2022.08.032 ↗
45. Effect of the number of nitrogen dopants on the electronic and magnetic properties of graphitic and pyridinic N-doped graphene – a density-functional study10.1039/D1RA01095F ↗
46. Cu- and S-doped multielement composite Cu/Mn3O4@SC microspheres derived from bimetallic CuMn-MOF as anode materials for lithium-ion batteries10.1007/s10853-024-09401-1 ↗
47. In situ doping brushite on zinc manganese oxide toward enhanced water oxidation performance: Mimicry of an oxygen-evolving complex10.1016/S1872-2067(18)63075-X ↗
48. Roles of intrinsic Mn3+ sites and lattice oxygen in mechanochemical debromination and mineralization of decabromodiphenyl ether with manganese dioxide10.1016/j.chemosphere.2018.04.160 ↗
49. Mn3O4 nanoparticles anchored on carbon nanotubes as anode material with enhanced lithium storage10.1016/j.jallcom.2020.157179 ↗
50. Morphology-conserved transformation: synthesis of hierarchical mesoporous nanostructures of Mn2O3 and the nanostructural effects on Li-ion insertion/deinsertion properties10.1039/c1jm00011j ↗
51. Electrode reactions of manganese oxides for secondary lithium batteries10.1016/j.elecom.2010.08.023 ↗
52. Porous walnut-like Mn2O3 anode derived from the waste graphene production effluent10.1007/s10934-022-01216-2 ↗
53. Embedding MnO@Mn3O4 nanoparticles in an N-Doped-Carbon framework derived from Mn-Organic clusters for efficient lithium storage10.1002/adma.201704244 ↗
54. MnO/Mn2O3 nanowires coated by porous N-Doped carbon for long-cycle and high-rate lithium-ion batteries10.1021/acsanm.0c00860 ↗
55. Facile synthesis of nanosized Mn3O4 powder anodes for high capacity lithium-ion battery via flame spray pyrolysis
56. One-step fabrication of two-dimensional hierarchical Mn2O3@graphene composite as high-performance anode materials for lithium ion batteries10.1016/j.jmst.2020.12.006 ↗
57. MnO@Mn2O3 nanocrystals embedded in biochar networks for sustainable anode of lithium-ion batteries
58. Volumetric buffering of manganese dioxide nanotubes by employing ‘as is’ graphene oxide: an approach towards stable metal oxide anode material in lithium-ion batteries10.1016/j.jallcom.2020.155803 ↗
59. Facile fabrication of SnO2@TiO2 core–shell structures as anode materials for lithium-ion batteries10.1039/C6TA03915D ↗
60. Formation of Co3O4 microframes from MOFs with enhanced electrochemical performance for lithium storage and water oxidation10.1039/C6CC02093C ↗
61. Energy storage in nanomaterials – capacitive, pseudocapacitive, or battery-like?10.1021/acsnano.8b01914 ↗
62. Amorphous cobalt selenite nanoparticles decorated on a graphitic carbon hollow shell for high-rate and ultralong cycle life lithium-ion batteries10.1021/acssuschemeng.0c05658 ↗