journal article·2026-02Open access

Establishing a framework for determining the wetting of Ni on YSZ in SOC fuel electrodes

Magnus Björnsson, Karin Vels Hansen, Peter Stanley Jørgensen, Ming Chen, Anne Hauch, Søren Bredmose Simonsen

Abstract

Morphological changes to Ni particles is a major contributor to the severe degradation of state-of-the-art Ni-YSZ cermet fuel electrodes of solid oxide cells (SOC). Changes in wetting properties between Ni and YSZ has been proposed as a possible driving force for Ni mobility, however, solid-solid systems lack a well-defined framework for determining the degree of wetting. In this work, methodologies for determining the wetting, starting from the well-known liquid-solid system and ending with single crystalline and polycrystalline solid-solid systems, are presented and discussed. Three methods for determining the contact angle in polycrystalline systems are validated against the well-defined single crystalline system. A Ni-to-YSZ contact angle of approx. 130° is determined for an as prepared model solid oxide cell fuel electrode. This value is independent of Ni particle size in the range 80–800 nm. The analysis further shows that heat treatment at 900 °C of YSZ with 8 mol% yttria leads to substantially less wetting. Similar heat treatment to ScYSZ with 1 mol% yttria leads to slightly higher degree of wetting. The decrease in wetting of Ni on 8YSZ may be due to a higher Y concentration at the Ni-YSZ interface due to Y segregation at the high temperature.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Nuclear Materials and Properties · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. Recent advances in solid oxide cell technology for electrolysis
2. Solid oxide electrolysis cells – interplay between operating conditions, fuel electrode overpotential and degradation10.1016/j.ssi.2022.116127 ↗
3. Nickel coarsening in annealed Ni/8YSZ anode substrates for solid oxide fuel cells10.1016/S0167-2738(00)00650-0 ↗
4. Effect of Ni content on the morphological evolution of Ni-YSZ solid oxide fuel cell electrodes10.1063/1.4942459 ↗
5. A parameter study of solid oxide electrolysis cell degradation: microstructural changes of the fuel electrode10.1016/j.electacta.2018.04.170 ↗
6. 3D microstructural characterization of Ni/YSZ electrodes exposed to 1 year of electrolysis testing10.1149/2.1281902jes ↗
7. Degradation of Ni-YSZ electrodes in solid oxide cells: impact of polarization and initial microstructure on the Ni evolution10.1149/2.1261915jes ↗
8. 3D microstructural characterization of Ni/yttria-stabilized zirconia electrodes during long-term CO2 electrolysis10.1039/D3TA01503C ↗
9. Degradation of solid oxide cells during co-electrolysis of steam and carbon dioxide at high current densities10.1016/j.jpowsour.2016.08.055 ↗
10. Microstructural comparison of solid oxide electrolyser cells operated for 6100 h and 9000 h10.1016/j.jpowsour.2014.10.188 ↗
11. A detailed post mortem analysis of solid oxide electrolyzer cells after long-term stack operation10.1149/2.0961805jes ↗
12. Ni migration of Ni-YSZ electrode in solid oxide electrolysis cell: an integrated model study10.1016/j.jpowsour.2021.230660 ↗
13. Simulation of coarsening in three-phase solid oxide fuel cell anodes10.1016/j.jpowsour.2010.08.010 ↗
14. Comparison of microstructural evolution of fuel electrodes in solid oxide fuel cells and electrolysis cells10.1016/j.jpowsour.2019.227599 ↗
15. Study on the effects of polarization on local morphological change of nickel at active three-phase-boundary using patterned nickel-film electrode in solid oxide fuel cell anode10.1016/j.actamat.2017.05.051 ↗
16. Understanding the Ni migration in solid oxide cell: a coupled experimental and modeling approach10.1149/1945-7111/acc1a3 ↗
17. (Invited) on degradation mechanisms of Ni-YSZ fuel electrodes in solid oxide cells10.1149/11205.0071ecst ↗
18. Relation between Ni particle shape change and Ni migration in Ni–YSZ electrodes – a Hypothesis10.1002/fuce.201600222 ↗
19. Influence of polarization on the morphological changes of nickel in fuel electrodes of solid oxide cells10.1149/1945-7111/ab6f5b ↗
20. Performance estimation by multiphase-field simulations and transmission-line modeling of nickel coarsening in FIB-SEM reconstructed Ni-YSZ SOFC anodes I: influence of wetting angle10.1016/j.jpowsour.2023.233031 ↗
21. Triple phase boundary specific pathway analysis for quantitative characterization of solid oxide cell electrode microstructure10.1016/j.jpowsour.2015.01.054 ↗
22. Wettability and interfacial reactions in the systems Ni/YSZ and Ni/Ti-TiO2/YSZ10.1016/1359-6454(96)00019-5 ↗
23. A practical guide to pulsed laser deposition, this Journal is cite this10.1039/D2CS00938B ↗
24. Ni/YSZ electrodes structures optimized for increased electrolysis performance and durability10.1016/j.ssi.2016.06.003 ↗
25. Properties and performance of SOFCs produced on a pre-pilot plant scale10.1002/fuce.200500108 ↗
26. Durability of high performance Ni–yttria stabilized zirconia supported solid oxide electrolysis cells at high current density10.1016/j.jpowsour.2014.03.133 ↗
27. Fiji: an open-source platform for biological-image analysis10.1038/nmeth.2019 ↗
28. Surface science techniques
29. Marchand
30. Lejček · 2010 · 136 · 5
31. Dupré · 1869
32. An essay on the cohesion of fluids10.1098/rstl.1805.0005 ↗
33. Contact angles: history of over 200 years of open questions10.1680/jsuin.19.00007 ↗
34. Tsoga’ · 1996
35. Agglomeration behavior of nickel particles on YSZ and TiO2-doped YSZ electrolytes10.1016/j.jpowsour.2011.10.047 ↗
36. Agglomeration behavior of nickel particles on YSZ electrolyte
37. Zur Frage der Geschwindigkeit des Wachstums und der Auflösung der Krystallflagen
38. Equilibrium shape of a small particle in contact with a foreign substrate10.1016/0001-6160(67)90206-4 ↗
39. A review of wetting versus adsorption, complexions, and related phenomena: the rosetta stone of wetting10.1007/s10853-013-7462-y ↗
40. Interfacial interaction between Ni and oxide in SOFC anodes10.1149/11106.0257ecst ↗
41. Ni-YSZ(001) solid-solid interfacial energy and orientation relationships10.1111/jace.16122 ↗
42. Ni-YSZ(111) solid-solid interfacial energy10.1007/s10853-013-7960-y ↗
43. Wettability analysis of metallic nickel particles on yttria-stabilized zirconia10.1016/j.jpowsour.2024.235195 ↗
44. Wettability analysis of Ni/YSZ interface under operating conditions of solid oxide cells10.1016/j.jpowsour.2025.237867 ↗
45. Towards the validation of a phase field model for Ni coarsening in solid oxide cells10.1016/j.actamat.2021.116887 ↗
46. Scandia-Zirconia electrolytes and electrodes for SOFCS
47. Alternative and innovative solid oxide electrolysis cell materials: a short review10.1016/j.rser.2021.111322 ↗
48. Doping of scandia-stabilized zirconia electrolytes for intermediate-temperature solid oxide fuel cell: a review10.1016/j.ceramint.2021.08.285 ↗
49. Characteristic and challenges of scandia stabilized zirconia as solid oxide fuel cell material – in depth review10.1016/j.ssi.2023.116302 ↗
50. Electrochemical removal of segregated silicon dioxide impurities from yttria stabilized zirconia surfaces at elevated temperatures10.1016/j.ssi.2011.02.024 ↗
51. Segregation in single-crystal fully stabilized Yttria-Zirconia10.1111/j.1151-2916.1995.tb08810.x ↗
52. Absence of dopant segregation to the surface of scandia and yttria co-stabilized zirconia10.1149/2.003206esl ↗
53. Effect of segregation on surface and near-surface chemistry of yttria-stabilized zirconia10.1021/jp212133z ↗