journal article·2026-02Open access

Rationally designed zinc oxide nanosphere and multi-walled carbon nanotube composite with enhanced photocatalytic and photoelectrochemical performance

Seok-Ho Seo, Young Jae Park, Juhee You, Junwon Lee, Cheol-Min Yang, Mehmet Suha Yazici, Sang-Youp Yim, Yong-Ho Ra, Inseok Seo, Yuwen Wei, Donghee Park, Dong Ick Son

Abstract

Photoelectrochemical (PEC) water splitting represents a promising route toward sustainable solar-to-hydrogen energy conversion. Zinc oxide (ZnO), with its wide bandgap (∼3.37 eV), high electron mobility and optical transparency has been intensively investigated as a photoanode material. However, its practical utilization remains limited by insufficient visible-light absorption and photocorrosion-induced instability. Here, we present a rationally engineered composite photoanode comprising ZnO nanospheres electrostatically integrated with surface-functionalized multi-walled carbon nanotube (MWCNT), forming a highly conductive and robust interfacial network. The ZnO nanospheres, assembled from quantum dots, ensure high surface area and efficient light harvesting, while the MWCNT network facilitates rapid charge transport and suppresses electron-hole recombination, as evidenced by pronounced photoluminescence quenching. This architecture delivers a remarkable photocurrent density of 417 μA/cm 2 at 1.23 V RHE , corresponding to a 29.7-fold enhancement compared with pristine ZnO. In addition, the composite achieves a hydrogen yield of 3.44 μmol/cm 2 (12.3 times higher) and accelerates pollutant degradation kinetics by 21-fold, demonstrating multifunctional performance. The synergistic interplay between ZnO nanostructures and MWCNTs not only enhances charge transfer dynamics but also imparts superior photostability. These findings highlight a scalable materials design strategy for developing high-efficiency, durable photoanodes, offering broad implications for next-generation solar fuel production and environmental remediation technologies. • ZnO nanosphere–MWCNT photoanode fabricated via hydrothermal synthesis. • Functionalized MWCNTs enabled strong ZnO–MWCNT coupling and fast charge transfer. • Achieved 417 μA cm −2 at 1.23 VRHE with 81.1 % stability after 10 h. • Produced 3.44 μmol cm −2 H 2 and showed 21 × faster RhB degradation.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Photocatalysis Techniques · TiO2 Photocatalysis and Solar Cells · Solar-Powered Water Purification Methods

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. Photovoltaic and photoelectrochemical solar energy conversion with Cu2O10.1021/acs.jpcc.5b08397 ↗
2. Stability of photoelectrochemical cells based on colloidal quantum dots10.1039/D4CS00587B ↗
3. Recent advances in zinc oxide-based photoanodes for photoelectrochemical water splitting10.1016/j.ijhydene.2024.05.461 ↗
4. CdS/CdSe co-sensitized TiO2 photoelectrode for efficient hydrogen generation in a photoelectrochemical cell10.1021/cm901762h ↗
5. A review of recent modification strategies of TiO2-based photoanodes for efficient photoelectrochemical water splitting performance10.1016/j.electacta.2023.143142 ↗
6. Modulating hole extraction and water oxidation kinetics in CoPi/Au/BiVO4 photoanode via strong metal-support interactions10.1016/j.jechem.2025.05.048 ↗
7. Constructing NiFe-metal-organic frameworks from NiFe-layered double hydroxide as a highly efficient cocatalyst for BiVO4 photoanode PEC water splitting
8. Electron-rich Mn: nife-ldhs onto BiVO4 photoanode for improved photoelectrochemical water splitting
9. A facile chemical synthesis of ZnO@ multilayer graphene nanoparticles with fast charge separation and enhanced performance for application in solar energy conversion10.1016/j.nanoen.2016.04.031 ↗
10. Multi-walled carbon nanotubes modified ZnO nanorods: a photoanode for photoelectrochemical cell10.1016/j.electacta.2014.08.026 ↗
11. Flower-shaped ZnO nanocrystallite aggregates synthesized through a template-free aqueous solution method for dye-sensitized solar cells10.1063/1.4905567 ↗
12. ZnO nanoparticles decorated multi-walled carbon nanotubes for enhanced photocatalytic and photoelectrochemical water splitting10.1016/j.jphotochem.2017.10.018 ↗
13. CNT-ZnO core-shell photoanodes for photoelectrochemical water splitting10.3390/coatings12010047 ↗
14. Light-harvesting multi-walled carbon nanotubes and CdS hybrids: application to photocatalytic hydrogen production from water10.1039/C0EE00330A ↗
15. Recent advances in earth‐abundant heterogeneous electrocatalysts for photoelectrochemical water splitting
16. Surface engineering of nanomaterials for photo‐electrochemical water splitting
17. Preparation of multi-walled carbon nanotube supported TiO2 and its photocatalytic activity in the reduction of CO2 with H2O10.1016/j.carbon.2006.11.028 ↗
18. The effects of ethyl cellulose on PV performance of DSSC made of nanostructured ZnO pastes10.1016/j.tsf.2010.03.125 ↗
19. Emissive ZnO–graphene quantum dots for white-light-emitting diodes10.1038/nnano.2012.71 ↗
20. Adsorption behavior of NO2 molecules in ZnO-mono/multilayer graphene core–shell quantum dots for NO2 gas sensor10.1016/j.jiec.2021.11.003 ↗
21. Direct conjugation with a zero length linker of fullerene C 70 to ZnO quantum dots for multicolor light-emitting diodes10.1039/D0MH00449A ↗
22. Oxidative acid treatment of carbon nanotubes10.1016/j.surfin.2018.11.001 ↗
23. On the influence of various physicochemical properties of the CNTs based implantable devices on the fibroblasts' reaction in vitro10.1007/s10856-015-5597-x ↗
24. Photo-induced exciton dynamics and broadband light harvesting in ZnO nanorod-templated multilayered two-dimensional MoS2/MoO3 photoanodes for solar fuel generation10.1021/acsanm.9b01972 ↗
25. Effective surface engineering for defect passivation and reduction of water oxidation overpotential in benchmark 2D ?‐SnWO4 nanoplate photoanodes10.1002/adfm.202417398 ↗
26. Facile morphology controllable synthesis of zinc oxide decorated carbon nanotubes with enhanced microwave absorption10.1007/s10854-021-05850-5 ↗
27. Nano carbon conformal coating strategy for enhanced photoelectrochemical responses and long-term stability of ZnO quantum dots10.1016/j.nanoen.2015.02.013 ↗
28. Hierarchically structured ZnO film for dye‐sensitized solar cells with enhanced energy conversion efficiency10.1002/adma.200602927 ↗
29. Polydisperse aggregates of ZnO nanocrystallites: a method for energy‐conversion‐efficiency enhancement in dye‐sensitized solar cells10.1002/adfm.200701073 ↗
30. Aggregation of ZnO nanocrystallites for high conversion efficiency in dye‐sensitized solar cells10.1002/ange.200704919 ↗
31. Atomic layer deposition of ZnO on multi-walled carbon nanotubes and its use for synthesis of CNT–ZnO heterostructures10.1007/s11671-010-9721-z ↗
32. Photoluminescence and Raman scattering of ZnO nanorods10.1016/j.solidstatesciences.2008.10.016 ↗
33. High-pressure Raman spectroscopy study of wurtzite ZnO10.1103/PhysRevB.65.092101 ↗
34. Temperature dependence of Raman scattering in ZnO10.1103/PhysRevB.75.165202 ↗
35. Encapsulating carbon nanotubes with SiO 2: a strategy for applying them in polymer nanocomposites with high mechanical strength and electrical insulation10.1039/C4TC01051E ↗
36. Enhanced photovoltaic performance of inverted polymer solar cells utilizing versatile chemically functionalized ZnO@ graphene quantum dot monolayer10.1016/j.nanoen.2015.11.039 ↗
37. Ag@ ZnO/MWCNT ternary nanocomposite as an active and stable catalyst for the 4-nitrophenol reduction in water10.1088/1361-6528/abf96b ↗
38. Ammonia and nitrogen dioxide detection using ZnO/CNT nanocomposite synthesized by sol–gel technique10.1007/s10971-023-06190-y ↗
39. Oxygen vacancy induced band-gap narrowing and enhanced visible light photocatalytic activity of ZnO10.1021/am300835p ↗
40. Formation of ZnO nanostructures by a simple way of thermal evaporation10.1063/1.1495878 ↗
41. Influence of Li-N and Li-F co-doping on defect-induced intrinsic ferromagnetic and photoluminescence properties of arrays of ZnO nanowires10.1063/1.4747929 ↗
42. Optical and field emission characteristics of anodic aluminium oxide/ZnO hybrid nanostructure10.1016/j.matchemphys.2010.02.074 ↗
43. Synthesis of ZnO nanoparticles with controlled shapes, sizes, aggregations, and surface complex compounds for tuning or switching the photoluminescence10.1021/cg5017017 ↗
44. Bias-free visible light-driven photoelectrochemical water splitting of type II ZnO/CuS core/shell heterojunction nanotube arrays10.1016/j.ijhydene.2023.03.083 ↗
45. ZnO/ZnS core-shell composites for low-temperature-processed perovskite solar cells10.1016/j.jechem.2017.09.026 ↗
46. Thermionic emission and work function of multiwalled carbon nanotube yarns10.1103/PhysRevB.73.235412 ↗
47. Low-temperature processed tantalum/niobium co-doped TiO2 electron transport layer for high-performance planar perovskite solar cells10.1088/1361-6528/abeb37 ↗
48. Photoelectrochemical performance of MWCNT–Ag–ZnO ternary hybrid: a study of Ag loading and MWCNT garnishing10.1007/s10853-021-05821-5 ↗
49. Impact of carbon nanotubes concentrations on the performance of carbon nanotubes/zinc oxide nanocomposite for photoelectrochemical water splitting10.1016/j.jelechem.2023.117579 ↗