2D multiphysics model for proton conductor ceramic technology investigating the effects of temperature, composition of reactants and electrolyte material
Source abstract
Abstract
The main goal of this work is the development of a model for a protonic ceramic electrolysis cell (PCEC), a technology emerging as a promising alternative to traditional solid oxide cells (SOCs). A two-dimensional numerical model has been developed for the simulation of a planar cell (5 × 5 cm 2 ). The model is set up as the combination of a thermal-fluid-dynamic model and an electro-chemical one, also comprehending the transport of three defects (protons, electron holes and oxygen vacancies) through the membrane, typical for barium-based zirconate. Firstly, a state-of-the-art B a Z r 0.8 Y 0.2 O 3 − δ (BZY) electrolyte material and cell structure (electrode supported Ni-BZY/BZY/SFM-BZY) with available experimental performance data have been selected from literature. Furthermore, the parameters required to model a novel material B a C e 0.65 Z r 0.2 Y 0.15 O 3 − δ (BCZY), still not available in literature, have been introduced. The purpose of this study is to quantify the effect of different operating conditions and modeling assumptions on the hydrogen production performance for the state of the art BZY electrolyte, also establishing the effect of the electronic leakage on the transport number and faradaic efficiency. Finally, this material is compared to the newly introduced BCZY to assess their respective advantages and disadvantages. • 2D thermo-fluid-dynamic-electrochemical model of protonic ceramic electrolysis. • Sensitivity analysis of operating conditions on the electrolysis performance. • BCZY improves proton transport and faradaic efficiency compared to BZY20. • Higher water content at electrodes enhances faradaic efficiency. • Increased temperature raises proton diffusivity but lowers proton concentration.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Fuel Cells and Related Materials · Chemical Looping and Thermochemical Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. World energy outlook and state of renewable energy: 10-year evaluation10.1016/j.igd.2023.100070 ↗
2. Water electrolysers with closed and open electrochemical systems10.1038/s41563-020-0788-3 ↗
3. A review on low-temperature protonic conductors: principles and chemical sensing applications10.3390/chemosensors12060096 ↗
4. Hydrogen separation via proton conducting ceramic membranes: a review10.1016/j.ijhydene.2024.05.181 ↗
5. Proton conduction-assisted direct CO2 methanation using Ni/CaO/Y-doped BaZrO3 proton conductor10.1016/j.fuel.2022.124094 ↗
6. Materials development and prospective for protonic ceramic fuel cells10.1002/er.7371 ↗
7. Highly efficient reversible protonic ceramic electrochemical cells for power generation and fuel production10.1038/s41560-019-0333-2 ↗
8. Proton-conducting oxides10.1146/annurev.matsci.33.022802.091825 ↗
9. Proton conducting alkaline earth zirconates and titanates for high drain electrochemical applications10.1016/S0167-2738(01)00953-5 ↗
10. A review on experimental and theoretical studies of perovskite barium zirconate proton conductors10.1007/s42247-021-00230-5 ↗
11. Effects of sintering additives on defect chemistry and hydration of BaZr0.4Ce0.4(Y,Yb)0.2O3−δ proton conducting electrolytes10.1016/j.ssi.2023.116355 ↗
12. Membrane polarization in mixed-conducting ceramic fuel cells and electrolyzers10.1016/j.ijhydene.2015.10.100 ↗
13. Defect chemistry and transport within dense BaCe0.7Zr0.1Y0.1Yb0.1O3 − δ (BCZYYb) proton-conducting membranes
14. [Equations solution method] method for calculating ionic and electronic defect concentrations in proton containing perovskites10.1006/jssc.1998.8092 ↗
15. Defect incorporation and transport within dense BaZr0.8Y0.2O3 − δ (BZY20) proton-conducting membranes
16. Self-sustainable protonic ceramic electrochemical cells using a triple conducting electrode for hydrogen and power production10.1038/s41467-020-15677-z ↗
17. Zr and Y co-doped perovskite as a stable, high performance cathode for solid oxide fuel cells operating below 500 °C10.1039/C6EE01915C ↗
18. Triple-conducting layered perovskites as cathode materials for proton-conducting solid oxide fuel cells10.1002/cssc.201402351 ↗
19. Analysis of planar solid oxide fuel cells based on proton-conducting electrolyte10.1016/j.ssi.2010.09.002 ↗
20. Mathematical modeling and steady-state analysis of a proton-conducting solid oxide fuel cell10.1016/j.jprocont.2012.01.014 ↗
21. Mathematical modeling analysis and optimization of key design parameters of proton-conductive solid oxide fuel cells10.3390/en7010173 ↗
22. Analysis of a proton-conducting SOFC with direct internal reforming10.1016/j.ces.2009.06.066 ↗
23. Analysis and performance assessment of NH3 and H2 fed SOFC with proton-conducting electrolyte10.1016/j.ijhydene.2017.07.234 ↗
24. Numerical analysis of mass and heat transport in proton-conducting SOFCs with direct internal reforming10.1016/j.apenergy.2015.03.037 ↗
25. Electrochemical modeling of ammonia-fed solid oxide fuel cells based on proton conducting electrolyte10.1016/j.jpowsour.2008.05.018 ↗
26. Electrochemical modeling of hydrogen production by proton-conducting solid oxide steam electrolyzer10.1016/j.ijhydene.2008.05.065 ↗
27. Three-dimensional modeling and performance optimization of proton conducting solid oxide electrolysis cell10.1002/fuce.201900246 ↗
28. Interpreting equilibrium-conductivity and conductivity-relaxation measurements to establish thermodynamic and transport properties for multiple charged defect conducting ceramics10.1039/C5FD00012B ↗
29. Mathematical modeling of a proton-conducting solid oxide fuel cell with current leakage10.1016/j.jpowsour.2018.08.038 ↗
30. Modeling ammonia-fueled co-flow dual-channel protonic-ceramic fuel cells10.1080/15435075.2021.2018321 ↗
31. Modeling protonic-ceramic fuel cells with porous composite electrodes in a button-cell configuration10.1149/2.0591713jes ↗
32. Energy storage and hydrogen production by proton conducting solid oxide electrolysis cells with a novel heterogeneous design10.1016/j.enconman.2020.113044 ↗
33. [NPP-Integral model comparison-on Word]Interpretation of Defect and Gas-Phase Fluxes through Mixed-Conducting Ceramics Using Nernst–Planck–Poisson and Integral Formulations
34. Partial conductivities of mixed conducting BaCe0.65Zr0.2Y0.15O3–δ10.1016/j.ijhydene.2010.07.122 ↗
35. Hydration hydrogen in oxides10.1039/B403011G ↗
36. The role of deep acceptor centers in the oxidation of acceptor-doped wide-band-gap perovskites ABO310.1016/j.jssc.2017.01.010 ↗
37. Transport properties of the Ba(Zr,Ce,Y,Yb)O3−δ proton conductor: the real role of co-substitution of Y and Yb10.1039/D3TA07486B ↗
38. Modeling of a single repeating unit for protonic ceramic cell applications10.1149/11106.1185ecst ↗
39. Protonic ceramic electrochemical cells for hydrogen production and electricity generation: exceptional reversibility, stability, and demonstrated faradaic efficiency10.1039/C8EE02865F ↗
40. EMF method determination of conductivity contributions from protons and other foreign ions in oxides10.1016/0167-2738(88)90424-9 ↗
41. Gas humidification impact on the properties and performance of perovskite-type functional materials in proton-conducting solid oxide cells10.1002/adfm.201802592 ↗
42. A highly stable Pr2NiO4+δ oxygen electrode in electrolyte supported protonic ceramic electrolysis cells (PCECs) for hydrogen production with high faradaic efficiency10.1039/D3YA00542A ↗
43. Steam electrolysis by proton-conducting solid oxide electrolysis cells (SOECs) with chemically stable BaZrO3-Based electrolytes10.1149/06801.3387ecst ↗
44. Preparation and characterization of symmetrical protonic ceramic fuel cells as electrochemical hydrogen pumps10.1016/j.jpowsour.2020.228036 ↗
45. Transport properties of Ba(Zr0.8Y0.2)O3 - δ perovskite10.1016/j.ssi.2007.02.010 ↗