Unveiling the effect of polytetrafluoroethylene (PTFE) content in catalyst layers for high-temperature proton exchange membrane fuel cells based on CsH5(PO4)2-doped polybenzimidazole membrane: Experimental and molecular dynamic study
Source abstract
Abstract
The structural optimization of catalyst layers is essential for enhancing the performance and durability of high-temperature proton exchange membrane fuel cells based on CsH 5 (PO 4 ) 2 -doped polybenzimidazole membranes. In this work, catalyst layers with different polytetrafluoroethylene (PTFE) contents (10, 20, 30, and 40 wt%) are systematically investigated through experiments and molecular dynamics (MD) simulations to elucidate the correlation between electrode microstructure and cell performance. The membrane electrode assembly (MEA) with 30 wt% PTFE achieves the highest peak power density (1012 mW cm −2 under H 2 /O 2 condition and 728 mW cm −2 under H 2 /Air condition). At this optimal binder content, the catalyst layer forms a well-integrated porous structure with minor cracks, effective acid distribution, and a sufficient number of catalyst active sites. Both lower and higher PTFE contents are inappropriate and led to an inferior cell performance; an insufficient amount of PTFE resulted in acid flooding and poor structural cohesion, whereas an excessive amount of PTFE leads to blocked pores and covered catalyst sites. MD simulations further confirms that PTFE content significantly influences the phosphoric acid distribution near catalyst surfaces. Moreover, the MEA with 30 wt% PTFE exhibits excellent stability, showing a voltage degradation rate of only 6.67 μV h −1 during the 150-h durability test.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Fuel Cells and Related Materials · Advancements in Solid Oxide Fuel Cells · Electrocatalysts for Energy Conversion
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Performance enhancement from catalysts to membrane electrode assemblies for high-temperature proton exchange membrane fuel cells10.1016/j.nanoen.2025.110931 ↗
2. Recent advances in phosphoric acid–based membranes for high–temperature proton exchange membrane fuel cells10.1016/j.jechem.2021.06.024 ↗
3. Comparative analysis of degradation mechanisms in HT-PEM fuel cells under start–stop and load cycling with hydrogen and nitrogen-diluted feeds10.1016/j.ijhydene.2024.04.028 ↗
4. Performance degradation and mitigation of high temperature polybenzimidazole-based polymer electrolyte membrane fuel cells10.1039/D3CS00072A ↗
5. Recent progress of antipoisoning catalytic materials for high temperature proton exchange membrane fuel cells doped with phosphoric acid10.1039/D3IM00101F ↗
6. The mechanism of proton conduction in phosphoric acid10.1038/nchem.1329 ↗
7. Influence of the polytetrafluoroethylene content on the performance of high-temperature polymer electrolyte membrane fuel cell electrodes10.1016/j.ijhydene.2016.02.156 ↗
8. Overcoming the electrode challenges of high-temperature proton exchange membrane fuel cells10.1007/s41918-023-00180-y ↗
9. Mechanism of action of polytetrafluoroethylene binder on the performance and durability of high-temperature polymer electrolyte fuel cells10.1016/j.ijhydene.2021.01.192 ↗
10. High-performance membrane-electrode assembly with an optimal polytetrafluoroethylene content for high-temperature polymer electrolyte membrane fuel cells10.1016/j.jpowsour.2016.05.042 ↗
11. The effect of binder content on the performance of a high temperature polymer electrolyte membrane fuel cell produced with reactive spray deposition technology10.1016/j.electacta.2015.02.025 ↗
12. Effect of PTFE nanoparticles in catalyst layer with high Pt loading on PEM fuel cell performance10.1016/j.ijhydene.2016.03.048 ↗
13. Fabrication of novel binderless anode via electrophoretic deposition for HT-PEMFC10.1080/02670844.2019.1597426 ↗
14. Binderless electrodes for high-temperature polymer electrolyte membrane fuel cells10.1016/j.jpowsour.2014.08.112 ↗
15. Acid distribution and durability of HT-PEM fuel cells with different electrode supports10.1002/fuce.201700181 ↗
16. Performance of an intermediate-temperature fuel cell with a CsH5(PO4)2-Doped polybenzimidazole membrane10.1149/1945-7111/ac4d6e ↗
17. A proton conductor electrolyte based on molten CsH5(PO4)2 for intermediate-temperature fuel cells10.1039/C7RA12803G ↗
18. Breaking through the cracks: on the mechanism of phosphoric acid migration in high temperature polymer electrolyte fuel cells10.1149/2.0501814jes ↗
19. Distribution characteristics of phosphoric acid and PTFE binder on Pt/C surfaces in high-temperature polymer electrolyte membrane fuel cells: molecular dynamics simulation approach10.1016/j.ijhydene.2021.01.218 ↗
20. On the conductivity of phosphoric acid electrolyte10.1007/BF01039396 ↗
21. Effect of ionomer content on cathode catalyst layer for PEMFC via molecular dynamics simulations and experiments10.1016/j.ijhydene.2022.05.122 ↗
22. Phosphoric acid invasion in high temperature PEM fuel cell gas diffusion layers10.1016/j.electacta.2017.10.054 ↗
23. Acid doped branched poly(biphenyl pyridine) membranes for high temperature proton exchange membrane fuel cells and vanadium redox flow batteries10.1016/j.cej.2024.151121 ↗
24. The influence of comonomer structure on properties of poly(aromatic pyridine) copolymer membranes for HT-PEMFCs10.1016/j.memsci.2024.122703 ↗
25. Long-durability poly(dibenzofuran-co-terphenyl N-methylimidazole) copolymer membranes for high-temperature polymer electrolyte membrane fuel cells10.1021/acs.macromol.5c00024 ↗
26. Synthesis and characterization of Cu@Pt/C core-shell structured catalysts for proton exchange membrane fuel cell10.1016/j.ijhydene.2011.04.224 ↗
27. Effects of cathode catalyst layer fabrication parameters on the performance of high-temperature polymer electrolyte membrane fuel cells10.1016/j.apsusc.2020.145461 ↗
28. Influence of operating conditions on the degradation mechanism in high-temperature polymer electrolyte fuel cells10.1016/j.jpowsour.2019.227090 ↗
29. Investigation of degradation mechanisms of a high-temperature polymer-electrolyte-membrane fuel cell stack by electrochemical impedance spectroscopy10.1016/j.jpowsour.2012.07.129 ↗
30. AC impedance technique in PEM fuel cell diagnosis—A review10.1016/j.ijhydene.2007.05.036 ↗
31. Phosphoric acid distribution and its impact on the performance of polybenzimidazole membranes10.1016/j.jpowsour.2014.06.171 ↗
32. Characterization of the morphological modification induced by long term operations on phosphoric acid fuel cell (PAFC) electrodes10.1007/BF01094311 ↗
33. New generation, metal-free electrocatalysts for fuel cells, solar cells and water splitting10.1039/c0ee00652a ↗
34. Effect of PTFE content and sintering temperature on the properties of a fuel cell electrode backing layer10.1115/1.4026932 ↗
35. Effect of catalyst layer microstructures on performance and stability for high temperature polymer electrolyte membrane fuel cells10.1016/j.jpowsour.2021.230059 ↗
36. Performance of CCM-type MEAs based on a CsH5(PO4)2-doped polybenzimidazole membrane for HT-PEMFC10.1002/er.8722 ↗
37. Enhanced performance of polybenzimidazole-based high temperature proton exchange membrane fuel cell with gas diffusion electrodes prepared by automatic catalyst spraying under irradiation technique10.1016/j.jpowsour.2013.05.128 ↗