journal article·2026-01Open access

Modeling the powder plasticity of porous electrodes for the prediction of battery breathing and swelling prior to degradation

Junning Jiao, Eunbee Kim, Wei Li, Zijie Xu, Royal C. Ihuaenyi, Ruqing Fang, Taeyoung Kim, Suyong Shin, Xueyan Li, Wei Li, Hana Cho, Juner Zhu

Abstract

Porous electrodes in lithium-ion batteries undergo cyclic mechanical deformation during operation, yet predictive models in the small-to-medium strain regime under functional pressure conditions remain scarce. This work develops and calibrates a constitutive model for porous electrode materials by integrating systematic low-pressure triaxial and uniaxial compression tests with the Drucker–Prager/Cap (DPC) plasticity framework, grounded in traditional powder mechanics. The calibrated model captures particle sliding and porous consolidation via the Drucker–Prager envelope and Deshpande–Fleck cap, respectively, and is readily implementable in commercial finite element platforms. Coupled with reduced-order electrochemical models, it enables accurate prediction of reversible “breathing” and irreversible “swelling” during cycling. Discussion highlights the model’s sensitivity to electrochemical inputs, the amplification of small prediction errors in mechanical response, and the practical treatment of diffusion-induced strain as a tunable fitting parameter for industrial use. The approach balances experimental simplicity, computational efficiency, and predictive fidelity, offering a practical tool for battery manufacturing, structural design, and life-cycle management. • Developed a powder plasticity model for porous electrodes. • Calibrated model parameters using triaxial and uniaxial compression tests. • Coupled elasto-plastic mechanics with the conventional P2D framework. • Applied inverse optimization to improve training of simulation results. • Predicted battery breathing and swelling prior to long-term degradation.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Battery Technologies Research · Advancements in Battery Materials · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Battery dimensional changes occurring during charge/discharge cycles—thin rectangular lithium ion and polymer cells10.1016/S0378-7753(03)00281-7 ↗
2. Phenomenological force and swelling models for rechargeable lithium-ion battery cells10.1016/j.jpowsour.2016.01.103 ↗
3. Electrochemical-mechanical coupled modeling and parameterization of swelling and ionic transport in lithium-ion batteries10.1016/j.jpowsour.2017.12.044 ↗
4. A framework for three-dimensional mesoscale modeling of anisotropic swelling and mechanical deformation in lithium-ion electrodes10.1149/2.0081411jes ↗
5. Modeling volume change due to intercalation into porous electrodes10.1149/2.030408jes ↗
6. Modeling battery performance due to intercalation driven volume change in porous electrodes10.1149/2.0621711jes ↗
7. Consistently tuned battery lifetime predictive model of capacity loss, resistance increase, and irreversible thickness growth10.1149/1945-7111/ad1294 ↗
8. Modeling degradation to predict capacity and cell level reversible and irreversible expansion throughout life across various cycling conditions
9. Effect of external pressure and internal stress on battery performance and lifespan10.1016/j.ensm.2022.07.034 ↗
10. Real-time monitoring of internal structural deformation and thermal events in lithium-ion cell via embedded distributed optical fibre10.1016/j.jpowsour.2021.230957 ↗
11. Lifetime extension of aged li-ion batteries via mechanical constraints10.1016/j.xcrp.2025.102685 ↗
12. Rapid simulation of electro-chemo-mechanical deformation of Li-ion batteries based on porous electrode theory10.1149/1945-7111/ad4f1e ↗
13. Grain-scale modelling of swelling granular materials; application to super absorbent polymers10.1016/j.powtec.2017.06.015 ↗
14. Guiding the design of heterogeneous electrode microstructures for li-ion batteries: Microscopic imaging, predictive modeling, and machine learning10.1002/aenm.202003908 ↗
15. 3D microstructure design of lithium-ion battery electrodes assisted by X-ray nano-computed tomography and modelling10.1038/s41467-020-15811-x ↗
16. Multi-length scale microstructural design of lithium-ion battery electrodes for improved discharge rate performance10.1039/D1EE01388B ↗
17. Microstructural evolution of battery electrodes during calendering10.1016/j.joule.2020.10.010 ↗
18. A microstructural electrochemo-mechanical model of high-nickel composite electrodes towards digital twins to bridge the particle and electrode-level characterizations10.1039/D4EE04856C ↗
19. Digital-twin-driven structural and electrochemical analysis of Li + single-ion conducting polymer electrolyte for all-solid-state batteries10.1002/bte2.20220061 ↗
20. Porous-electrode theory with battery applications10.1002/aic.690210103 ↗
21. Modeling of galvanostatic charge and discharge of the lithium/polymer/insertion cell10.1149/1.2221597 ↗
22. Fuller · 2018
23. Multiphase porous electrode theory10.1149/2.0171711jes ↗
24. The impact of elastic deformation on deposition kinetics at lithium/polymer interfaces10.1149/1.1850854 ↗
25. The effect of interfacial deformation on electrodeposition kinetics10.1149/1.1710893 ↗
26. Effect of initial state of lithium on the propensity for dendrite formation: A theoretical study10.1149/2.0661702jes ↗
27. Mohr · 1878
28. Essai sur une application des règles des maximis et minimis à quelques problèmes de statique relatifs à l’architecture
29. Soil mechanics and plastic analysis or limit design10.1090/qam/48291 ↗
30. Isotropic constitutive models for metallic foams10.1016/S0022-5096(99)00082-4 ↗
31. Deformation and failure of lithium-ion batteries treated as a discrete layered structure10.1016/j.ijplas.2019.06.011 ↗
32. ABAQUS Theory Manual (v6.6), URL: https://classes.engineering.wustl.edu/2009/spring/mase5513/abaqus/docs/v6.6/books/stm/default.htm?startat=ch04s04ath116.html.
33. Experimental calibration of density-dependent modified Drucker-Prager/Cap model using an instrumented cubic die for powder compact10.1016/j.powtec.2010.07.003 ↗
34. Constitutive model calibration for powder compaction using instrumented die testing10.1007/s11340-011-9542-8 ↗
35. Drucker–prager criterion
36. Testing and modeling the mechanical properties of the granular materials of graphite anode10.1149/2.0141807jes ↗
37. A large deformation and fracture model of lithium-ion battery cells treated as a homogenized medium10.1149/1945-7111/aba936 ↗
38. Operando nanoindentation: A new platform to measure the mechanical properties of electrodes during electrochemical reactions10.1149/2.1411714jes ↗
39. Chemomechanics of rechargeable batteries: Status, theories, and perspectives10.1021/acs.chemrev.2c00002 ↗
40. Standardizing mechanical tests on li-ion batteries to develop a useful cell-level model under extreme mechanical loads10.1016/j.est.2023.107320 ↗
41. Methods—PETLION: Open-source software for millisecond-scale porous electrode theory-based lithium-ion battery simulations10.1149/1945-7111/ac201c ↗
42. Between scylla and charybdis: Balancing among structural stability and energy density of layered NCM cathode materials for advanced lithium-ion batteries10.1021/acs.jpcc.7b06363 ↗
43. Strain rate dependent plasticity of lithium-ion pouch cells: Experiments and simulations10.1016/j.ijimpeng.2021.104048 ↗
44. Nocedal · 2006
45. Learning heterogeneous reaction kinetics from X-ray videos pixel by pixel10.1038/s41586-023-06393-x ↗
46. Learning the physics of pattern formation from images10.1103/PhysRevLett.124.060201 ↗
47. Ihuaenyi · 2025