journal article·2025-12Open access

Splat-to-splat heat transfer coefficient determination in dual-phase Ln2Zr2O7 + 8 wt% Y2O3×ZrO2 thermal barrier coatings

G. Moskal, M. Mikuśkiewicz, B. Witala, M. Mrówka, K. Nowińska, J. Ludew, K. Kuliński, I. Moskal, M. Gałkowska, A. Dudek, St Roskosz, J. Zdunek

Abstract

This paper discusses the problem of quantitatively measuring the thermal conductivity and thermal resistance of splat-to-splat interfaces in Ln 2 Zr 2 O 7 + 8 wt% Y 2 O 3 × ZrO 2 composite thermal barrier coatings. For this, the laser flash method was utilised to determine the effective diffusivity and thermal conductivity of single-layer Ln 2 Zr 2 O 7 and 8 wt% Y 2 O 3 × ZrO 2 coatings, as well as composite coatings. Using these parameters and applying the Hasselman-Johanson, Tavagar, and Every and Tzou relationships, the temperature dependence of the thermal conductivity of the Ln 2 Zr 2 O 7 + 8 wt% Y 2 O 3 × ZrO 2 interface was established. The thermal conductivity ranged from 10 5 –10 6 Wm −1 K −1 and declined with rising temperature. The most effective (and simplest mathematically) computational approach was found to be the Hasselman-Johanson relationship. Interface thermal conductivity is essential for predicting the insulating performance of ceramic composites and layered systems (including thermal barrier coatings), whether through analytical calculations or numerical simulations such as finite element analysis. Accurate determination will also enable the correlation of technological parameters of ceramic material consolidation (e.g., powder granule size used during thermal spraying) with the geometry and dimensions of the splats, ultimately relating to the measured thermal conductivity.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Nuclear Materials and Properties · Thermal and Kinetic Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Review of composite cathodes for intermediate-temperature solid oxide fuel cell applications10.1016/j.ceramint.2020.06.176 ↗
3. Ceramic-ceramic nanocomposite materials for energy storage applications: a review10.1016/j.est.2024.113330 ↗
4. From concept to commercialization: a review of tubular solid oxide fuel cell technology10.1016/j.jechem.2024.05.026 ↗
5. Advances in thermal barrier coatings modeling, simulation, and analysis: a review10.1016/j.jeurceramsoc.2024.116693 ↗
6. A comprehensive understanding of thermal barrier coatings (TBCs): applications, materials, coating design and failure mechanisms10.3390/met14050575 ↗
7. Thermal barrier coating materials review
8. The current advancement of zirconate based dual phase system in thermal barrier coatings (TBCs): new modes of the failures: understanding and investigations10.1016/j.aej.2024.01.063 ↗
9. Nanotechnologies in ceramic electrochemical cells10.1039/D3CS00303E ↗
10. Ceramic membrane composites for highly efficient oil–water separation: a review10.1039/D4TA04208E ↗
11. Current and further trajectories in designing functional materials for solid oxide electrochemical cells: A review of other reviews10.1016/j.jechem.2024.02.047 ↗
12. Protonic ceramic electrochemical cells: opportunities and challenges for ammonia synthesis10.1016/j.nxener.2024.100144 ↗
13. Rapid, direct fabrication of thermochromic ceramic composite sensors via flash lamp annealing10.1002/adem.202400323 ↗
14. Thermally matched multilayer ceramic composite insulating layers for high-temperature thick/thin-film sensors on nickel-based superalloy10.1016/j.ceramint.2023.11.144 ↗
15. Electrical insulation improvement using a CeYSZ/Al2O3 double ceramic layer underlayer for thin-film sensors10.1016/j.ceramint.2024.03.333 ↗
16. Designing state-of-the-art gas sensors: from fundamentals to applications10.1002/tcr.202300350 ↗
17. Diffuse mismatch model of thermal boundary conductance using exact phonon dispersion10.1063/1.2133890 ↗
18. Recent developments in the field of thermal barrier coatings10.1007/s11666-009-9312-7 ↗
19. Thermal conductivities of YSZ/Al2O3 composites10.1016/j.jeurceramsoc.2010.07.007 ↗
20. Effective thermal conductivity of composites with interfacial thermal barrier resistance10.1177/002199838702100602 ↗
21. Interfacial thermal resistance in nanocrystalline yttria-stabilized zirconia10.1016/S1359-6454(02)00057-5 ↗
22. Influence of grain size on the thermal conductivity of tin oxide ceramics10.1016/S0955-2219(99)00171-5 ↗
23. Grain boundary thermal resistance and finite grain size effects for heat conduction through porous polycrystalline alumina10.1016/j.ijheatmasstransfer.2018.01.082 ↗
24. Strain engineering for the kapitza resistance of the ZrO 2/α-Al2O3 and YSZ/α-Al2O3 interfaces10.1007/s10338-021-00266-4 ↗
25. Molecular dynamics simulations in nanoscale heat transfer: a mini review10.1115/1.4067341 ↗
26. Interlamellar contact within plasma-sprayed coatings10.1016/0040-6090(82)90453-9 ↗
27. Anisotropic effect of splat interface on thermal conductivity of plasma sprayed YSZ coating10.1016/j.surfcoat.2013.08.031 ↗
28. Relationships between the microstructure and properties of thermally sprayed deposits10.1361/105996302770348754 ↗
29. Anisotropic electrical properties in thermal spray metallic coatings
30. Anisotropic electrical conduction from heterogeneous oxidation states in plasma sprayed TiO2 coatings10.1063/1.2382456 ↗
31. Melting index characterization and thermal conductivity model of plasma sprayed YSZ coatings10.1016/j.jeurceramsoc.2012.05.030 ↗
32. Thermal diffusivity/microstructure relationship in Y-PSZ thermal barrier coatings10.1361/105996399770350629 ↗
33. Thermal conductivity and expansion of cross-ply composites with matrix cracks10.1016/0022-5096(95)00033-F ↗
34. A model for the thermal conductivity of plasma-sprayed ceramic coatings10.1016/0040-6090(84)90506-6 ↗
35. The relationship between the microstructure and thermal diffusivity of plasma-sprayed tungsten coatings10.1007/BF02646969 ↗
36. Distributed porosity as a control parameter for oxide thermal barriers made by physical vapor deposition10.1111/j.1151-2916.2001.tb01118.x ↗
37. An analytical model for simulation of heat flow in plasma-sprayed thermal barrier coatings10.1361/10599630523764 ↗
38. Heat transfer through plasma-sprayed thermal barrier coatings in gas turbines: a review of recent work10.1007/s11666-009-9337-y ↗
39. Effect of splat-interface discontinuity on effective thermal conductivity of plasma sprayed thermal barrier coating10.1016/j.ceramint.2019.10.215 ↗
40. Microstructure–thermal conductivity relationships for plasma‐sprayed yttria‐stabilized zirconia coatings10.1111/j.1551-2916.2008.02476.x ↗
41. Low thermal conductivity coatings for gas turbine applications10.1007/s11666-007-9068-x ↗
42. Effects of defects on the effective thermal conductivity of thermal barrier coatings10.1016/j.apm.2011.08.018 ↗
43. Plasma-sprayed ceramic coatings: anisotropic elastic and conductive properties in relation to the microstructure; cross-property correlations10.1016/S0921-5093(00)01022-4 ↗
44. Effects of pores on mechanical properties of plasma‐sprayed ceramic coatings10.1111/j.1151-2916.2000.tb01236.x ↗
45. Comprehensive microstructural characterization and predictive property modeling of plasma-sprayed zirconia coatings10.1016/S1359-6454(03)00030-2 ↗
46. An analytical model of the thermal conductivity of thin porous ceramic coatings10.1007/s11666-025-01954-0 ↗
47. The effect of pore morphology on thermal insulation properties of thermal barrier coatings10.1016/j.matchemphys.2024.129729 ↗
48. Thermal cycling and hot corrosion behavior of a novel LaPO4/YSZ double-ceramic-layer thermal barrier coating10.1016/j.ceramint.2018.02.057 ↗
49. GdPO4 as a novel candidate for thermal barrier coating applications at elevated temperatures10.1016/j.surfcoat.2018.06.016 ↗
50. Thermal conductivity of plasma‐sprayed monolithic and multilayer coatings of alumina and yttria‐stabilized zirconia10.1111/j.1151-2916.1999.tb01816.x ↗
51. Microstructure, texture, and thermal conductivity of single‐layer and multilayer thermal barrier coatings of Y2O3‐stabilized ZrO2 and Al2O3 made by physical vapor deposition10.1111/j.1551-2916.1999.tb20076.x ↗
52. Plasma spraying of micro-composite thermal barrier coatings10.1016/S0042-207X(01)00451-1 ↗
53. Enhanced thermal radiation blocking of YSZ-LaMgAl11O19 thermal barrier coatings consisting of splat interfaces with different refractive indexes
54. Raznjevic · 1976
55. Thermal conductivity of plasma‐sprayed monolithic and multilayer coatings of alumina and yttria‐stabilized zirconia10.1111/j.1151-2916.1999.tb01816.x ↗
56. Thermal resistance determination of Sm2Zr2O7 + 8YSZ composite type of TBC10.1016/j.apsusc.2020.145998 ↗
57. Thermal conductivity of composites with heterogeneous fillers under effects of interface thermal resistance10.1016/j.ijheatmasstransfer.2024.125840 ↗
58. The influence of stochastic interface defects on the effective thermal conductivity of fiber-reinforced composites
59. Modelling effective thermal conductivity in polymer composites: a simple cubic structure approach10.1016/j.compscitech.2024.110592 ↗
60. Fillers and methods to improve the effective (out-plane) thermal conductivity of polymeric thermal interface materials–A review10.1016/j.heliyon.2024.e25381 ↗
61. Interface thermal resistance and thermal conductivity of polymer composites at different types, shapes, and sizes of fillers: a review10.1002/pc.26029 ↗
62. Effective thermal characteristics of nanostructures in the presence of Kapitza resistance10.1134/S0021894424020159 ↗
63. Modeling the heat conductivity across bulk grain and grain boundaries in perovskite solar cells10.1007/s11082-025-08149-5 ↗
64. Prediction of the effective thermal conductivity of plain woven ceramic matrix composites with pore and interphase effects10.1016/j.ijheatmasstransfer.2024.126501 ↗
65. Interfacial thermal resistance: past, present, and future10.1103/RevModPhys.94.025002 ↗
66. Assessing predictive schemes for thermal conductivity against diamond-reinforced silver matrix composites at intermediate phase contrast10.1016/j.scriptamat.2006.11.008 ↗
67. The effect of particle size on the thermal conductivity of ZnS/diamond composites10.1016/0956-7151(92)90205-S ↗
68. Effective thermal conductivity of composites with a thermal contact resistance between the constituents: nondilute case10.1063/1.337877 ↗
69. Oxidation behavior of the monolayered La2Zr2O7, composite La2Zr2O7 + 8YSZ, and double-ceramic layered La2Zr2O7/La2Zr2O7 + 8YSZ/8YSZ thermal barrier coatings10.3390/ma13143242 ↗
70. Atypical decomposition processes of Sm2Zr2O7+ 8YSZ dual-phase TBCs during hot corrosion10.1016/j.corsci.2020.108681 ↗
71. Maxwell · 1873 · vol. 2 · 3408
72. Low-thermal-conductivity plasma-sprayed thermal barrier coatings with engineered microstructures10.1016/j.actamat.2006.03.024 ↗
73. Thermal diffusivity characterization of bond-coat materials used for thermal barrier coatings10.1007/s10973-016-5785-z ↗
74. Thermal diffusivity measurement of ceramic materials used in spraying of TBC systems: the influence of materials' morphology and (re) manufacturing processes10.1007/s10973-019-08589-8 ↗
75. Characterization of microstructure and thermal properties of Gd2Zr2O7-type thermal barrier coating10.1016/j.jeurceramsoc.2011.11.043 ↗
76. Characterization of microstructure and thermal properties of the TBC coatings type Nd2Zr2O7 and Nd2Zr2O7/YSZ10.1016/j.jeurceramsoc.2011.12.004 ↗
77. Calorimetric investigation of the La2Zr2O7, Nd2Zr2O7, Sm2Zr2O7 and LaYO3 compounds and CALPHAD assessment of the La2O3–Y2O3 system10.1016/j.tca.2011.08.021 ↗
78. The heat capacity and derived thermodynamic functions of La2Zr2O7 and Ce2Zr2O7 from 4 to 1000 K10.1016/S0022-3697(06)00137-5 ↗
79. Low temperature heat capacity of Nd2Zr2O7 pyrochlore10.1016/S0021-9614(03)00040-5 ↗
80. Up-date of a thermodynamic database of the ZrO2-Gd2O3-Y2O3-Al2O3 system for TBC applications10.1007/s11669-010-9815-4 ↗
81. Fiji: an open-source platform for biological-image analysis10.1038/nmeth.2019 ↗
82. Rare-earth tantalates for next-generation thermal barrier coatings10.1016/j.pmatsci.2024.101265 ↗
83. Thermal conductivity and micromechanical properties of plasma-sprayed yttria-stabilized zirconia thermal barrier coatings10.1016/j.surfcoat.2025.132498 ↗
84. High entropy pyrochlore (La0.3Gd0.3Ca0.4)2(Ti0.2Zr0.2Hf0.2Nb0.2Ta0.2)2O7 ceramic with amorphous-like thermal conductivity for environmental/thermal barrier coating applications10.1016/j.jmst.2024.02.089 ↗
85. Improvement strategy on thermophysical properties of A2B2O7-type rare earth zirconates for thermal barrier coatings applications: a review10.1007/s12613-024-2853-4 ↗
86. Searching for low thermal conductivity materials for thermal barrier coatings: a theoretical approach
87. A new concept of the chemical composition design of ultra-low conducting thermal barrier coatings10.1016/j.jeurceramsoc.2024.02.010 ↗
88. Influence of doping elements on thermo-physical properties of co-doped strontium zirconate for potential thermal barrier coatings10.1016/j.jallcom.2024.174343 ↗
89. Design and thermal conduction mechanisms of rare-earth zirconate high-entropy ceramics with low photon thermal conductivity
90. Thermal diffusivity and conductivity of Pr, Eu and Ho zirconates
91. Tuning thermophysical properties of zirconate pyrochlore systems: B-site driven non-stoichiometric approach10.1016/j.jeurceramsoc.2025.117190 ↗
92. Native point defects and oxygen migration of rare earth zirconate and stannate pyrochlores10.1016/j.jmst.2020.09.033 ↗
93. First-principles prediction of disordering tendencies in pyrochlore oxides10.1103/PhysRevB.79.104203 ↗
94. Oxidation and hot corrosion behaviour of dual phase 8YSZ+ La2Zr2O7 and 8YSZ+ Gd2Zr2O7 TBC systems10.1007/s11666-025-01978-6 ↗
95. Selection of low and ultra-low thermal conductivity materials for insulating layers of TBC systems in the context of computational materials science opportunities—a review10.1007/s10973-025-14226-4 ↗
96. Thermal conductivity of ceramics, Mechan. Thermal propert
97. Kittel · 2018
98. Grosso · 2013
99. Infrared-optical properties and heat transfer coefficients of semitransparent thermal barrier coatings10.1016/j.surfcoat.2008.09.033 ↗
100. Thermal properties of Sm2Zr2O7–NiCr2O4 composites10.1016/j.ceramint.2014.03.093 ↗