journal article·2025-12Open access

Impact of cathode contamination by sulfur dioxide on proton exchange membrane fuel cell performance: Experimental and modeling study

A. Abd El Kader, M. Marchand, P. Affonso Nóbrega, C. Beauger

Abstract

Sulfur dioxide (SO 2 ) is a critical airborne contaminant that severely compromises the performance and durability of proton exchange membrane fuel cells (PEMFCs), particularly relevant for maritime applications. This study investigates the effect of SO 2 concentration (0.2–2 ppm) on PEMFC performance degradation through both experimental testing and modeling. Under a constant operating temperature of 70 °C and current density of 0.5 A/cm 2 , SO 2 exposure led to significant voltage losses (up to 42 % after 50 h at 2 ppm) and pronounced electrochemical surface area (ECSA) reductions ranging from 60 % to 90 %. The voltage degradation profile exhibits two distinctive features not previously documented in the literature: (i) a delayed initiation of voltage decline following the introduction of SO 2 into the air stream, and (ii) an increasingly sharp voltage drop, rather than a stabilization at a plateau, during the final stages of contamination. Notably, the severity of both phenomena was found to be dependent on the SO 2 concentration. Partial recovery of performance was achieved via clean air purging and cyclic voltammetry, although the degree of recovery diminished with increasing SO 2 concentration. We show that a classical Langmuir adsorption model fails to reproduce the voltage decay behavior observed in experiments. We propose a new contamination model incorporating the formation of multiple sulfur species (SO 2 , S 0 , and SO 4 2− ) that is able to capture that behavior.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. Main degradation mechanisms of polymer electrolyte membrane fuel cell stacks – mechanisms, influencing factors, consequences, and mitigation strategies10.1016/j.ijhydene.2023.06.215 ↗
2. Review and survey of methods for analysis of impurities in hydrogen for fuel cell vehicles according to ISO 14687:201910.3389/fenrg.2020.615149 ↗
3. Poisoning effects of sulfur dioxide in an air stream on spatial proton exchange membrane fuel cell performance10.1016/j.jpowsour.2019.226949 ↗
4. Study on the effect of NO2 impurity gas on the performance and local current density distribution of PEMFC10.1016/j.cej.2024.151813 ↗
5. Ammonia contamination of a proton exchange membrane fuel cell10.1149/2.0761803jes ↗
6. Polymer electrolyte membrane fuel cell contamination: testing and diagnosis of toluene-induced cathode degradation10.1016/j.jpowsour.2008.07.006 ↗
7. Numerical simulation of particulate matter interaction with the gas diffusion layer of proton-exchange membrane fuel cells under various relative humidity conditions10.1002/er.6591 ↗
8. Effects of ozone on the performance of a polymer electrolyte membrane fuel cell10.1002/fuce.200800182 ↗
9. Effect of contaminant mixtures in air on proton exchange membrane fuel cell performance10.1016/j.jpowsour.2018.12.023 ↗
10. Sensitivity analyses on the impact of air contaminants on automotive fuel cells10.1002/fuce.201500159 ↗
11. The impact of air contaminants on PEMFC performance and durability10.1016/j.jpowsour.2007.12.091 ↗
12. Deactivation of Pt/VC proton exchange membrane fuel cell cathodes by SO2, H2S and COS10.1016/j.jpowsour.2008.11.072 ↗
13. Assessing durability of cathodes exposed to common air impurities10.1016/j.jpowsour.2004.06.036 ↗
14. The multiprocess degradation of PEMFC performance due to sulfur dioxide contamination and its recovery10.1149/1.3247546 ↗
15. Effect of potential on sulfur-poisoning of Pt/C catalyst10.1149/1.2981918 ↗
16. The effect of ambient contamination on PEMFC performance10.1016/j.jpowsour.2006.12.103 ↗
17. Effects of impurities in the cathode airflow on proton exchange membrane fuel cell stacks10.1002/fuce.202200063 ↗
18. Spatial performance of high- and low-Pt loaded proton exchange membrane fuel cells under cathode exposure to nitrogen dioxide10.1016/j.jpowsour.2021.229657 ↗
19. Influence of nitrogen compounds on PEMFC: a comparative study10.1149/2.0181806jes ↗
20. Progress and perspective for in situ studies of oxygen reduction reaction in proton exchange membrane fuel cells
21. Table publisher, (n.d.). https://discomap.eea.europa.eu/App/AQViewer/index.html?fqn=Airquality_Dissem.b2g.AirQualityStatistics (accessed June 15, 2024).
22. Polymer electrolyte membrane fuel cell degradation in ships — review of degradation mechanisms and research gaps10.1016/j.jpowsour.2025.236678 ↗
23. SO2 adsorption on carbon-supported Pt electrocatalysts10.1149/1.3210684 ↗
24. Impacts of operating conditions on the recovery of proton exchange membrane fuel cells exposed to sulfur dioxide in an air stream10.1016/j.jpowsour.2023.232676 ↗
25. Operational performance recovery of SO2-Contaminated proton exchange membrane fuel cells10.1149/1.3483108 ↗
26. Effect of SO2 on the performance of the cathode of a PEM fuel cell at 0.5–0.7 V10.1149/1.3236650 ↗
27. Proton exchange membrane fuel cell contamination model: competitive adsorption followed by a surface segregated electrochemical reaction leading to an irreversibly adsorbed product10.1016/j.jpowsour.2010.04.011 ↗
28. Reshetenko · J. Power Sources · 2019 · 43810.1016/j.jpowsour.2019.226949 ↗
29. Products of SO2 adsorption on fuel cell electrocatalysts by combination of sulfur K-Edge XANES and electrochemistry10.1021/la2033466 ↗
30. The nature of species adsorbed on platinum from SO2 solutions
31. Interaction of SO2 with the platinum (001), (011), and (111) surfaces: a DFT study10.3390/catal10050558 ↗
32. Potential-dependent and face orientation-dependent electrochemical oxidative desorption behavior of sulfur species adsorbed on platinum single-crystal surfaces10.1021/acs.jpcc.4c03227 ↗
33. Structure of chemisorbed sulfur on a Pt(111) electrode10.1021/ja962637h ↗
34. Impact of sulfur dioxide on the oxygen reduction reaction at Pt/Vulcan carbon electrocatalysts10.1149/1.2736648 ↗
35. Analysis of the SO2 contamination effect on the oxygen reduction reaction in PEMFCs by electrochemical impedance spectroscopy10.1149/2.067205jes ↗
36. Systematic analysis for the effects of atmospheric pollutants in cathode feed on the performance of proton exchange membrane fuel cells10.5012/bkcs.2014.35.12.3475 ↗
37. Influence of SO2 concentration and relative humidity on electrode poisoning in polymer electrolyte membrane fuel cells10.1299/jtst.7.619 ↗
38. Mitigation studies of sulfur contaminated electrodes for PEMFC10.1016/j.ijhydene.2014.06.011 ↗
39. Influence of cell temperature on sulfur dioxide contamination in proton exchange membrane fuel cells10.1016/j.jpowsour.2013.08.054 ↗
40. Recovery of polymer electrolyte fuel cell exposed to sulphur dioxide10.1016/j.ijhydene.2016.01.077 ↗
41. A general model for air-side proton exchange membrane fuel cell contamination10.1016/j.jpowsour.2008.10.029 ↗
42. PEMFC contamination model: competitive adsorption demonstrated with NO210.1149/1.2833301 ↗
43. Tsotridis · 2016
44. Diagnostic tools in PEM fuel cell research: part I electrochemical techniques10.1016/j.ijhydene.2008.01.013 ↗
45. A perspective on influences of cathode material degradation on oxygen transport resistance in low Pt PEMFC10.1007/s12274-022-4642-6 ↗
46. Two forms of chemisorbed sulfur on platinum and related studies10.1016/S0022-0728(79)80374-5 ↗
47. Carbon corrosion mechanism and mitigation strategies in a proton exchange membrane fuel cell (PEMFC): a review10.1016/j.jpowsour.2020.229434 ↗
48. Comprehensive analysis of recovery procedures for SO2-contaminated proton exchange membrane fuel cells10.1016/j.electacta.2024.145168 ↗
49. Adsorption and oxidation of sulphur and of sulphur dioxide at the platinum electrode10.1016/S0022-0728(71)80162-6 ↗
50. Effect of potential on SO2 adsorption onto Pt/C catalyst for PEMFCs10.1149/1.3655700 ↗
51. Resolving sulfur oxidation and removal from Pt and Pt3Co electrocatalysts using in situ X-ray absorption spectroscopy10.1021/jp101977g ↗
52. Measurement of oxygen transport resistance in PEM fuel cells by limiting current methods10.1149/1.3152226 ↗
53. Breakthrough curve analysis by simplistic models of fixed bed adsorption: in defense of the century-old bohart-adams model10.1016/j.cej.2019.122513 ↗