journal article·2025-12Open access

High current density and low stoichiometry operation of a proton exchange membrane fuel cell with microchannels

Wei Liu, Vincenzo Liso, Torsten Berning

Abstract

The operation of proton exchange membrane fuel cells (PEMFC) at current densities in the order of 10 A cm −2 is investigated. Such high current densities are conceivable when the fuel cell employs cathode flow microchannels with dimensions in the order of 150– 200 μ m to obtain a high pressure drop in conjunction with the perforated metal transport layers to enhance waste heat removal. Employing a state-of-the-art computational fluid dynamics model that is based on the Eulerian multiphase approach, high current density fuel cell operation is studied, and the interplay between the operational pressure, temperature and stoichiometric flow ratio is investigated in detail. The results suggest that a combination of a current density in the order of 8-10 A cm −2 together with a low stoichiometric flow ratio around ξ =1.2-1.5 is feasible, while the air only needs to be minimally humidified because the high pressure at the cathode inlet leads to immediate self-humidification of the membrane. If indeed practical, this mode of operation can lead to unprecedented high power densities. Finally, the molar ratio of the inlet water to the product water Θ is calculated, and its importance for the sizing of the humidifier is highlighted.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (68)

Show source-provided references
1. Three-dimensional computational analysis of transport phenomena in a PEM fuel cell10.1016/S0378-7753(01)01057-6 ↗
2. The path towards sustainable energy10.1038/nmat4834 ↗
3. An overview of fuel cell technology: Fundamentals and applications10.1016/j.rser.2014.01.012 ↗
4. Comparative study of different fuel cell technologies10.1016/j.rser.2011.09.020 ↗
5. A review of multi-stack PEM fuel cell systems: Advantages, challenges and on-going applications in the industrial market
6. Designing the next generation of proton-exchange membrane fuel cells10.1038/s41586-021-03482-7 ↗
7. Barbir · 2012
8. O’Hayre · 2016
9. A one-dimensional computational model to identify operating conditions and cathode flow channel dimensions for a proton exchange membrane fuel cell10.3390/hydrogen5030033 ↗
10. Lohse-Busch · 2018
11. Recent advances in fuel cell electric vehicle technologies of Hyundai10.1149/08613.0003ecst ↗
12. An overview of proton exchange membrane fuel cell
13. Proton exchange membrane fuel cell (PEMFC) operation in high current density (HCD): Problem, progress and perspective10.1016/j.enconman.2024.118348 ↗
14. Proton exchange membrane fuel cells in electric vehicles: Innovations, challenges, and pathways to sustainability10.1016/j.jpowsour.2025.236769 ↗
15. Water management studies in PEM fuel cells, part I: Fuel cell design and in situ water distributions10.1016/j.ijhydene.2008.12.100 ↗
16. A review of proton exchange membrane fuel cell water management: Membrane electrode assembly10.1016/j.jpowsour.2021.230723 ↗
17. Review on water management methods for proton exchange membrane fuel cells10.1016/j.ijhydene.2020.06.211 ↗
18. Effect of a GDL based on carbon paper or carbon cloth on PEM fuel cell performance10.1016/j.fuel.2010.09.003 ↗
19. Measurement of through-plane effective thermal conductivity and contact resistance in PEM fuel cell diffusion media10.1016/j.electacta.2009.10.035 ↗
20. Determining the effective thermal conductivity of compressed PEMFC GDLs through thermal resistance modelling10.1016/j.jpowsour.2012.06.011 ↗
21. Through-plane thermal conductivity of PEMFC porous transport layers10.1115/1.4002403 ↗
22. Low stoichiometry operation of a proton exchange membrane fuel cell employing the interdigitated flow field – A modeling study10.1016/j.ijhydene.2012.02.137 ↗
23. Does the thermal conductivity of gas diffusion layer matter in polymer electrolyte fuel cells?10.1016/j.jpowsour.2022.231539 ↗
24. Thermal management of liquid-cooled proton exchange membrane fuel cell: A review10.1016/j.jpowsour.2025.237227 ↗
25. Metal based gas diffusion layers for enhanced fuel cell performance at high current densities10.1016/j.jpowsour.2016.11.001 ↗
26. Capillary pressure and hydrophilic porosity in gas diffusion layers for polymer electrolyte fuel cells10.1016/j.jpowsour.2005.05.086 ↗
27. A study of multiphase flow and heat transfer in proton exchange membrane fuel cells with perforated metal gas diffusion layers
28. A computational analysis of multiphase flow through PEMFC cathode porous media using the multifluid approach10.1149/1.3206691 ↗
29. Operating proton exchange membrane fuel cells at a constant relative humidity10.1149/10807.0003ecst ↗
30. A study of multi-phase flow through the cathode side of an interdigitated flow field using a multi-fluid model10.1016/j.jpowsour.2010.02.017 ↗
31. Low stoichiometry operation of the anode side of a low-temperature proton exchange membrane fuel cell–A modeling study10.1016/j.ijhydene.2023.06.288 ↗
32. High current density operation of a proton exchange membrane fuel cell with varying inlet relative humidity—A modeling study10.3390/en17164077 ↗
33. Klein · 2020
34. Visualization of water buildup in the cathode of a transparent PEM fuel cell10.1016/S0378-7753(03)00797-3 ↗
35. A 3D, multiphase, multicomponent model of the cathode and anode of a PEM fuel cell10.1149/1.1621412 ↗
36. Water management in PEM fuel cells10.1149/1.1641033 ↗
37. Effects of flow field and diffusion layer properties on water accumulation in a PEM fuel cell10.1016/j.ijhydene.2007.05.044 ↗
38. In-fibre bragg grating sensors for distributed temperature measurement in a polymer electrolyte membrane fuel cell10.1016/j.jpowsour.2009.03.021 ↗
39. Bang · 2004
40. On the distribution of local current density along a PEM fuel cell cathode channel10.1016/j.elecom.2019.02.005 ↗
41. Two-phase flow and transport in the air cathode of proton exchange membrane fuel cells10.1016/S0378-7753(00)00662-5 ↗
42. Two-phase transport in PEM fuel cell cathodes10.1115/1.2821597 ↗
43. Fundamental models for fuel cell engineering10.1021/cr020718s ↗
44. Liquid water transport in gas diffusion layer of polymer electrolyte fuel cells
45. Measurement of capillary pressure property of gas diffusion media used in proton exchange membrane fuel cells10.1149/1.2929063 ↗
46. Improved modeling and understanding of diffusion-media wettability on polymer-electrolyte-fuel-cell performance10.1016/j.jpowsour.2010.03.011 ↗
47. Modeling two-phase flow in PEM fuel cell channels10.1016/j.jpowsour.2008.01.047 ↗
48. The antoine equation for vapor-pressure data10.1021/cr60119a001 ↗
49. Effective diffusivity and water-saturation distribution in single-and two-layer PEMFC diffusion medium10.1016/S0017-9310(03)00305-3 ↗
50. A multi-fluid model for water and methanol transport in a direct methanol fuel cell10.3390/en15196869 ↗
51. High current density operation of proton exchange membrane fuel cells at a constant relative humidity10.1149/11405.0221ecst ↗
52. Tsotridis · 2015
53. PEM fuel cell relative humidity (RH) and its effect on performance at high temperatures10.1016/j.electacta.2008.02.074 ↗
54. Investigation of inlet gas relative humidity on performance characteristics of PEMFC operating at elevated temperature
55. Development and experimental characterization of a fuel cell powered aircraft10.1016/j.jpowsour.2007.06.215 ↗
56. Operating proton exchange membrane fuel cells without external humidification of the reactant gases: Fundamental aspects10.1149/1.1837893 ↗
57. The dew point temperature as a criterion for optimizing the operating conditions of proton exchange membrane fuel cells10.1016/j.ijhydene.2012.03.041 ↗
58. A parametric study of PEM fuel cell performances10.1016/S0360-3199(02)00284-7 ↗
59. Experimental and modelling studies of low temperature PEMFC performance10.1016/j.ijhydene.2020.01.019 ↗
60. Thermal analysis and management of proton exchange membrane fuel cell stacks for automotive vehicle10.1016/j.ijhydene.2021.07.143 ↗
61. Three-dimensional computational analysis of transport phenomena in a PEM fuel cell—a parametric study10.1016/S0378-7753(03)00816-4 ↗
62. Effect of back pressure and flow geometry on PEM fuel cell performance-an experimental study
63. Understanding the effects of backpressure on PEM fuel cell reactions and performance10.1016/j.jelechem.2012.09.033 ↗
64. Pressure effect on the PEMFC performance10.1002/fuce.201800135 ↗
65. The nernst equation10.1021/ed071p493 ↗
66. The effect of stoichiometry on dynamic behavior of a proton exchange membrane fuel cell (PEMFC) during load change10.1016/j.jpowsour.2004.03.060 ↗
67. Study on the effect of humidity and stoichiometry on the water saturation of PEM fuel cells10.1002/er.1845 ↗
68. Properties of molded graphite bi-polar plates for PEM fuel cell stacks