Double-layer humidity to electricity converter based on oxide powders with opposite ionic conductivity for operation without humidity gradient
Source abstract
Abstract
This article inform about creating a new variant of humidity to electricity converter (HEC) based on different types of zirconia powders – double-layer HEC. The powders that were used in the work differ in chemical composition (Y- and Mg-stabilized ZrO2) and surface properties (positive and negative charged) and allow realizing the charge separation of moving water ions and generate the electric power under ion gradient diffusion in the presence of water molecules in the atmosphere without humidity gradient. Due to the opposite ionic conductivity with respect to protons and OH groups, this HEC separate charges more effciently compared with converters operating only by the streaming potential mechanism under humidity gradient conditions. The resulting humidity to electricity converter can generate, for a long time, an open-circuit voltage of up to 120 mV combined with a power density of 2.2 μW on the optimal load resistance. Reducing the internal resistance of the converter by adding graphite particles to both parts of the converter and creating a network of percolation paths for water ions and electrons made it possible to increase the open-circuit voltage to 0.16 V, reduce the internal resistance to 120 Ohm and increase the power to 56 μW (4.7 μW/cm2).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Transition Metal Oxide Nanomaterials · Gas Sensing Nanomaterials and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. Masliyah · 2005
2. Measurement and interpretation of electrokinetic phenomena (IUPAC technical report)10.1351/pac200577101753 ↗
3. Ceramic nanofiber-based water-induced electric generator10.1021/acsami.1c17847 ↗
4. Harvesting energy from atmospheric water: Grand challenges in continuous electricity generation
5. Water-evaporation-induced electricity with nanostructured carbon materials10.1038/nnano.2016.300 ↗
6. Hydrovoltaic technology: from mechanism to applications10.1039/D1CS00778E ↗
7. A simple high power, fast response streaming Potential/current-based electric nanogenerator using a layer of Al2O3 nanoparticles10.1021/acsami.1c04290 ↗
8. Recent development of moisture-enabled-electric nanogenerators10.1002/smll.202204603 ↗
9. A review of humidity gradient-based power generator: devices, materials and mechanisms10.1016/j.nanoen.2022.107591 ↗
10. An efficient ambient-moisture–driven wearable electrical power generator10.1002/advs.202300750 ↗
11. Moisture adsorption-desorption full cycle power generation10.1038/s41467-022-30156-3 ↗
12. Polyoxometalates for continuous power generation by atmospheric humidity10.1007/s12274-023-5959-5 ↗
13. Humidity-tolerant moisture-driven energy generator with MXene aerogel - Organohydrogel bilayer10.1021/acsnano.2c10747 ↗
14. An efficient polymer moist-electric generator10.1039/C9EE00252A ↗
15. Interface-mediated hygroelectric generator with an output voltage approaching 1.5 volts10.1038/s41467-018-06633-z ↗
16. Moisture-electric–moisture-sensitive heterostructure triggered proton hopping for quality-enhancing moist-electric generator10.1007/s40820-023-01260-w ↗
17. Direct-current generators based on conductive polymers for self-powered flexible devices10.1038/s41598-021-99447-x ↗
18. Efficient energy harvesting: high power wearable humidity generators with PAM-LiCl/CMC structure10.1016/j.nanoen.2024.110590 ↗
19. Fully printed planar moisture-enabled electric generator arrays for scalable function integration10.1016/j.joule.2023.04.007 ↗
20. Sustainable power generation for at least one month from ambient humidity using unique nanofluidic diode10.1038/s41467-022-31067-z ↗
21. Emerging self-sustained electricity generation enabled by moisture
22. Self-powered wearable electronics based on moisture enabled electricity generation
23. Asymmetric ionic aerogel of biologic nanofibrils for harvesting electricity from moisture10.1016/j.nanoen.2020.104610 ↗
24. Current transfer processes in a hydrated layer localized in a two-layer porous structure of nanosized ZrO210.1007/s10854-021-07481-2 ↗
25. Estimation of agglomeration degree and nanoparticles shape of zirconia nanopowders10.1002/ppsc.200800041 ↗
26. Measurement of surface pH of pharmaceutical solids: a critical evaluation of indicator dye-sorption method and its comparison with slurry pH method10.1002/jps.21052 ↗
27. An efficient ambient-Moisture–Driven wearable electrical power generator10.1002/advs.202300750 ↗
28. Green moisture-electric generator based on supramolecular hydrogel with tens of milliamp electricity toward practical applications10.1038/s41467-024-47652-3 ↗
29. Power generation from ambient humidity using protein nanowires10.1038/s41586-020-2010-9 ↗
30. Lidorenko · 1984
31. Electrokinetic energy conversion efficiency in nanofluidic channels10.1021/nl061524l ↗
32. Large-scale production of flexible, high-voltage hydroelectric films based on solid oxides10.1021/acsami.9b09582 ↗
33. Generating energy from air: solid state planar concentration cell based on graphene oxide10.1002/admt.201600145 ↗
34. Self-electrified water is a powerful toolbox for the production of chemicals and energy
35. The triple phase boundary: a mathematical model and experimental investigations for fuel cells10.1149/1.1851054 ↗
36. Flexible, low-cost and scalable nanostructured conductive paper-based, efficient hygroelectric generator10.1039/D0EE03111A ↗
37. Constant electricity generation in nanostructured silicon via evaporation-driven water flow10.1002/anie.202002762 ↗
38. Biological nanofibrous generator for electricity harvest from moist air flow10.1002/adfm.201901798 ↗
39. Surface charge density-dependent performance of Ni–Al layered double hydroxide-based flexible self-powered generators driven by natural water evaporation10.1016/j.nanoen.2020.104502 ↗
40. Recent advances in fibrous materials for hydroelectricity generation10.1007/s40820-024-01537-8 ↗
41. A paper-based wearable moist–electric generator for sustained high-efficiency power output and enhanced moisture capture10.1002/smll.202408182 ↗
42. Understanding the role of proton and hydroxide transport in forward-bias bipolar membrane for electrochemical applications10.1002/admi.202400034 ↗
43. Catalytic proton−hydroxide recombination for forward-bias bipolar membranes10.1021/acsenergylett.2c02043 ↗
44. Dissociation of water molecules in systems with ion-exchange membranes10.1070/RC1988v057n08ABEH003389 ↗
45. Moisture-enabled self-charging and voltage stabilizing supercapacitor10.1038/s41467-024-49393-9 ↗
46. An asymmetric hygroscopic structure for moisture-driven hygro-ionic electricity generation and storage10.1002/adma.202201228 ↗
47. A long life moisture-enabled electric generator based on ionic diode rectification and electrode chemistry regulation10.1002/advs.202305530 ↗
48. The emerging chemistry of self-electrified water interfaces10.1039/D3CS00763D ↗
49. The mechanism of water oxidation: From electrolysis via homogeneous to biological catalysis
50. Solid state surface studies of the electrocatalysis of oxygen evolution on perovskites10.1016/S0022-0728(83)80243-5 ↗
51. Water–solid contact electrification causes hydrogen peroxide production from hydroxyl radical recombination in sprayed microdroplets
52. Free radical properties of the magnesium oxide surface10.1007/BF02062006 ↗
53. Production of Composite ZrO2-ZnO Nanoparticles Using Advanced Co-precipitation Process and Determination Their Photo-oxidative Properties by Oxidation of C60 Fullerene
54. Synthesized conditions influence on surface imperfection of nanosized metastable zirconia
55. Ag(Ag2O)–ZrO2–Y2O3 photosensitive composites: influence of synthesized routes on structure and properties10.1039/c6pp00196c ↗
56. Structure and properties of zirconia nanoparticles from density functional theory calculations10.1021/acs.jpcc.5b12185 ↗