Simplified calculation of the area specific impedance for solid-state battery design
Source abstract
Abstract
Simplified algebraic area specific impedance (ASI) correlations have been developed for solid-state composite battery electrodes made of a single ion conducting electrolyte, conductive additive, and intercalation active material. Two ASI expressions were developed, one for short times ( i.e., pulsed power operation) and another for the pseudo steady state operation ( i.e., sustained discharge for energy estimation). A full electrochemical model based on porous electrode theory was developed to examine the accuracy of the simplified ASI expressions. The simplified expressions agree favorably with full model results over a wide range of parameters ( i.e., electrode thicknesses, electrolyte conductivities, solid-state diffusion coefficients, specific surface areas, etc.) and conditions ( i.e., C-rates, states of charge, and pulse times). Under most conditions, the error between the full model and the correlations is well below 7 %. Higher errors were observed for the pseudo steady state expression at high/low states of charge where the assumption of uniform reaction distributions loses validity. The short time ASI has higher error at low states of charge due to the nonlinearity of the open circuit voltage equation, which is assumed linear in the formulation of the simplified algebraic expression.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Technologies Research · Advanced Battery Materials and Technologies · Advancements in Battery Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. Solid‐state Li–metal batteries: challenges and horizons of oxide and sulfide solid electrolytes and their interfaces
2. Lithium metal polymer electrolyte batteries: opportunities and challenges10.1149/2.F05192if ↗
3. Particles in composite polymer electrolyte for solid-state lithium batteries: a review10.1016/j.partic.2021.04.002 ↗
4. Processing thin but robust electrolytes for solid-state batteries10.1038/s41560-020-00759-5 ↗
5. Perspectives on improving the safety and sustainability of high voltage lithium‐ion batteries through the electrolyte and separator region10.1002/aenm.202200147 ↗
6. Status and challenges in enabling the lithium metal electrode for high-energy and low-cost rechargeable batteries10.1038/s41560-017-0047-2 ↗
7. Designing solid-state electrolytes for safe, energy-dense batteries10.1038/s41578-019-0165-5 ↗
8. Challenges in speeding up solid-state battery development10.1038/s41560-023-01208-9 ↗
9. Simplified calculation of the area specific impedance for battery design10.1016/j.jpowsour.2010.10.020 ↗
10. Characterization of a commercial size cylindrical Li-ion cell with a reference electrode10.1016/S0378-7753(00)00372-4 ↗
11. Examining the electrochemical impedance at low states of charge in lithium- and manganese-rich layered transition-metal oxide electrodes10.1149/2.0931507jes ↗
12. The influence of temperature on area-specific impedance and capacity of Li-ion cells with nickel-containing positive electrodes10.1016/j.jpowsour.2022.231864 ↗
13. A critical overview of definitions and determination techniques of the internal resistance using lithium-ion, lead-acid, nickel metal-hydride batteries and electrochemical double-layer capacitors as examples10.1016/j.jpowsour.2015.07.073 ↗
14. Comparison of several methods for determining the internal resistance of lithium ion cells10.3390/s100605604 ↗
15. Designing cathodes and cathode active materials for solid‐state batteries10.1002/aenm.202201425 ↗
16. Influence of lithium ion kinetics, particle morphology and voids on the electrochemical performance of composite cathodes for all-solid-state batteries10.1149/1945-7111/ac50df ↗
17. High capacity garnet-based all-solid-state lithium batteries: fabrication and 3D-microstructure resolved modeling10.1021/acsami.8b06705 ↗
18. Analysis of interfacial effects in all-solid-state batteries with thiophosphate solid electrolytes10.1021/acsami.9b21404 ↗
19. Charge/discharge simulation of an all-solid-state thin-film battery using a one-dimensional model10.1149/2.041202jes ↗
20. An advanced model framework for solid electrolyte intercalation batteries10.1039/c0cp02473b ↗
21. An advanced all-solid-state Li-ion battery model10.1016/j.electacta.2019.135147 ↗
22. A two-mechanism and multiscale compatible approach for solid state electrolytes of (Li-ion) batteries10.1016/j.est.2021.103842 ↗
23. Modeling of all-solid-state thin-film Li-ion batteries: accuracy improvement10.1016/j.ssi.2019.02.003 ↗
24. Modeling all-solid-state Li-ion batteries10.1149/1.3521414 ↗
25. A comparative review of models for all-solid-state Li-ion batteries10.3390/batteries10050150 ↗
26. A fully coupled electrochemical-mechanical-thermal model of all-solid-state thin-film Li-ion batteries10.1016/j.jpowsour.2022.231614 ↗
27. A comprehensive parametric study for solid-state lithium-ion battery through finite element simulation, Electron
28. Numerical modeling of damage evolution phenomenon in solid-state lithium-ion batteries10.1149/2.1101712jes ↗
29. Modeling and simulation of 2D lithium-ion solid state battery: effects of materials and geometry on the performance of SSB10.1002/er.3344 ↗
30. A coupled electro-chemo-mechanical model for all-solid-state thin film Li-ion batteries: the effects of bending on battery performances10.1016/j.jpowsour.2020.227803 ↗
31. A fully coupled mechano-electrochemical model for all-solid-state thin-film Li-ion batteries with non-porous electrodes: effects of chemo-mechanical expansions on battery performance and optimization strategies for stress evolution10.1149/1945-7111/ac8b3a ↗
32. An all coupled electrochemical-mechanical model for all-solid-state Li-ion batteries considering the effect of contact area loss and compressive pressure10.1016/j.energy.2021.121929 ↗
33. Optimizing all-solid-state sodium-ion batteries: insights from a P2D Model on NaSICON-based polymer–ceramic electrolyte10.1016/j.egyr.2024.11.077 ↗
34. Characterization of cathode degradation and development of a coupled electrochemical-aging model for sulfide-based all-solid-state batteries10.1016/j.jpowsour.2024.235830 ↗
35. Modeling of an all-solid-state battery with a composite positive electrode10.1016/j.etran.2024.100315 ↗
36. An elementary 1-dimensional model for a solid state lithium-ion battery with a single ion conductor electrolyte and a lithium metal negative electrode10.1016/j.jmps.2018.10.004 ↗
37. High active material loading in all‐solid‐state battery electrode via particle size optimization
38. Digital twin‐driven all‐solid‐state battery: unraveling the physical and electrochemical behaviors
39. Microstructural modeling of composite cathodes for all-solid-state batteries10.1021/acs.jpcc.8b11043 ↗
40. Modeling effective ionic conductivity and binder influence in composite cathodes for all-solid-state batteries10.1021/acsami.9b22788 ↗
41. Understanding the effects of chemical reactions at the cathode–electrolyte interface in sulfide based all-solid-state batteries10.1039/C9TA08517C ↗
42. Formulating interfacial impedances for designing high-energy and high-power all-solid-state battery cathodes10.1021/acsami.4c01322 ↗
43. Knehr · 2022
44. Cost of automotive lithium-ion batteries operating at high upper cutoff voltages10.1016/j.jpowsour.2018.09.037 ↗
45. From material properties to device metrics: a data-driven guide to battery design10.1039/D3YA00137G ↗
46. Cost savings for manufacturing lithium batteries in a flexible plant10.1016/j.jpowsour.2015.02.142 ↗
47. Editors' choice—quantifying the impact of charge transport bottlenecks in composite cathodes of all-solid-state batteries10.1149/1945-7111/abf8d7 ↗
48. Apparent increasing lithium diffusion coefficient with applied current in graphite10.1149/1945-7111/abaf9f ↗
49. Electrochemical modeling of lithium polymer batteries10.1016/S0378-7753(02)00193-3 ↗
50. Electrochemical modeling of lithium-ion positive electrodes during hybrid pulse power characterization tests10.1149/1.2939211 ↗
51. Analysis of the galvanostatic intermittent titration technique (GITT) as applied to a lithium-ion porous electrode10.1016/j.jpowsour.2008.09.045 ↗
52. Theoretical analysis of current distribution in porous electrodes10.1149/1.2425269 ↗
53. Newman · 2021
54. Carslaw · 1959
55. The lithium-ion battery: state of the art and future perspectives10.1016/j.rser.2018.03.002 ↗
56. Kane
57. Optimizing areal capacities through understanding the limitations of lithium-ion electrodes10.1149/2.0321602jes ↗