journal article·2025-02Open access

Superior electrochemical performance and reduced heat generation in 3D printed vs. 2D tape-casted NMC622 electrodes

Yucheng Zhou, Asya Orhan, Jianchao Ye, Nicolas Leport, Marcus A. Worsley, Laurent Pilon

Abstract

This study compares the charge storage mechanisms, thermodynamics behavior, ion transport, and heat generation in NMC622 electrodes fabricated using a novel 3D printing process and the conventional 2D tape casting process. First, potentiometric entropy measurements revealed that the charge storage mechanisms for both types of electrodes consisted of lithium deintercalation in a homogeneous solid solution of NMC622 followed by a transition from a hexagonal (H1) phase to another hexagonal (H2) phase through a monoclinic (M) phase. Both types of electrodes had similar thermodynamics behavior with overlapping entropic potential profiles. Furthermore, operando isothermal calorimetry at high C-rates indicated that the 3D printed electrodes featured larger specific capacity and better rate performance than the 2D tape-casted electrodes. The better performance of 3D printed electrodes was attributed to their larger electrode/electrolyte interfacial surface area and electrical conductivity as well as their faster lithium ion transport. As a result, the instantaneous heat generation rates were smaller in 3D printed electrodes than in 2D tape-casted electrodes, thus resulting in lower overall specific electrical energy and thermal energy dissipation per unit charge stored. Overall, additive manufacturing techniques offer great potential in producing electrodes with superior electrochemical performance and reduced heat generation for fast charging batteries. • Electrodes with NMC622 ribbon lines were fabricated by a novel 3D-printing process. • Conventional 2D tape-casted NMC622 electrodes were also produced for comparison. • The two types of electrodes had similar open-circuit voltage and entropic potential. • 3D-printed electrodes showed superior specific capacity and rate performance. • 3D-printed electrodes featured lower electrical energy loss and heat generation.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Supercapacitor Materials and Fabrication · Conducting polymers and applications · Advanced Sensor and Energy Harvesting Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (65)

Show source-provided references
1. Materials for next-generation lithium batteries
2. A new battery/ultracapacitor hybrid energy storage system for electric, hybrid, and plug-in hybrid electric vehicles
3. Metallic anodes for next generation secondary batteries10.1039/c3cs60177c ↗
4. A review on the key issues for lithium-ion battery management in electric vehicles10.1016/j.jpowsour.2012.10.060 ↗
5. An overview on thermal safety issues of lithium-ion batteries for electric vehicle application10.1109/ACCESS.2018.2824838 ↗
6. Challenges and benefits of post-lithium-ion batteries10.1039/C9NJ05682C ↗
7. Charge storage mechanism of MnO2 electrode used in aqueous electrochemical capacitor10.1021/cm049649j ↗
8. High-rate electrochemical energy storage through Li+ intercalation pseudocapacitance10.1038/nmat3601 ↗
9. Pseudocapacitive oxide materials for high-rate electrochemical energy storage10.1039/c3ee44164d ↗
10. Electrochemical kinetics of nanostructured Nb2O5 electrodes10.1149/2.040405jes ↗
11. Multidimensional materials and device architectures for future hybrid energy storage10.1038/ncomms12647 ↗
12. Pseudocapacitive charge storage in thick composite MoS2 nanocrystal-based electrodes10.1002/aenm.201601283 ↗
13. Asymmetric supercapacitors based on graphene/MnO2 and activated carbon nanofiber electrodes with high power and energy density10.1002/adfm.201100058 ↗
14. A high-performance supercapacitor-battery hybrid energy storage device based on graphene-enhanced electrode materials with ultrahigh energy density10.1039/c3ee40509e ↗
15. Achieving high energy density and high power density with pseudocapacitive materials10.1038/s41578-019-0142-z ↗
16. Recent developments of transition metal compounds-carbon hybrid electrodes for high energy/power supercapacitors10.1007/s40820-021-00642-2 ↗
17. High energy and power density TiO2 nanotube electrodes for 3D Li-ion microbatteries10.1039/c3ta11273j ↗
18. A flexible quasi-solid-state nickel-zinc battery with high energy and power densities based on 3D electrode design10.1002/adma.201603038 ↗
19. Understanding limiting factors in thick electrode performance as applied to high energy density Li-ion batteries10.1007/s10800-017-1047-4 ↗
20. Toward high areal energy and power density electrode for Li-ion batteries via optimized 3D printing approach10.1021/acsami.8b14797 ↗
21. Multiscale understanding and architecture design of high energy/power lithium-ion battery electrodes10.1002/aenm.202000808 ↗
22. Aerogels, additive manufacturing, and energy storage10.1016/j.joule.2023.03.021 ↗
23. Graphene oxide-based electrode inks for 3D-printed lithium-ion batteries10.1002/adma.201505391 ↗
24. Supercapacitors based on three-dimensional hierarchical graphene aerogels with periodic macropores10.1021/acs.nanolett.5b04965 ↗
25. Efficient 3D printed pseudocapacitive electrodes with ultrahigh MnO2 loading10.1016/j.joule.2018.09.020 ↗
26. Topology optimization for the design of porous electrodes10.1007/s00158-022-03249-2 ↗
27. Low tortuosity 3D-printed structures enhance reaction kinetics in electrochemical energy storage and electrocatalysis10.1002/sstr.202270036 ↗
28. Design and additive manufacturing of optimized electrodes for energy storage applications10.1016/j.carbon.2023.01.044 ↗
29. Effect of particle size on thermodynamics and lithium ion transport in electrodes made of Ti2Nb2O9 microparticles or nanoparticles10.1016/j.ensm.2022.08.010 ↗
30. Operando calorimetry informs the origin of rapid rate performance in microwave-prepared TiNb2O7 electrodes10.1016/j.jpowsour.2021.229537 ↗
31. Potentiometric entropy and operando calorimetric measurements reveal fast charging mechanisms in PNb9O2510.1016/j.jpowsour.2021.230776 ↗
32. Operando calorimetry investigation of particle size effects on heat generation in Wadsley-Roth (W0.2V0.8)3O7-based electrodes10.1021/acsaem.2c03150 ↗
33. Nickel-rich nickel manganese cobalt (NMC622) cathode lithiation mechanism and extended cycling effects using operando X-ray absorption spectroscopy10.1021/acs.jpcc.0c08095 ↗
34. Synchrotron-based X-ray diffraction and absorption spectroscopy studies on layered LiNixMnyCozO2 cathode materials: A review10.1016/j.ensm.2022.04.012 ↗
35. Towards 3D-lithium ion microbatteries based on silicon/graphite blend anodes using a dispenser printing technique10.1039/D0RA03161E ↗
36. Direct ink writing of adjustable electrochemical energy storage device with high gravimetric energy densities10.1002/adfm.201900809 ↗
37. Direct ink writing of 3D Zn structures as high-capacity anodes for rechargeable alkaline batteries10.1002/sstr.202200323 ↗
38. Printing porous carbon aerogels for low temperature supercapacitors10.1021/acs.nanolett.0c04780 ↗
39. 3D printed PC/SiOC@Zn hybrid composite as dendrite-free anode for Zn-ion battery10.1016/j.nanoen.2022.107505 ↗
40. 3D printing of hybrid MoS2-graphene aerogels as highly porous electrode materials for sodium ion battery anodes10.1016/j.matdes.2019.107689 ↗
41. 3D-printed structure boosts the kinetics and intrinsic capacitance of pseudocapacitive graphene aerogels10.1002/adma.201906652 ↗
42. 3D-printed graded electrode with ultrahigh MnO2 loading for non-aqueous electrochemical energy storage10.1002/aenm.202300408 ↗
43. 3D printed high-loading lithium-sulfur battery toward wearable energy storage10.1002/adfm.201909469 ↗
44. 3D printing dendrite-free lithium anodes based on the nucleated MXene arrays10.1016/j.ensm.2019.08.015 ↗
45. A simple and effective host for sodium metal anode: a 3D-printed high pyrrolic-N doped graphene microlattice aerogel10.1039/D2TA03294E ↗
46. 3D printing architecting reservoir-integrated anode for dendrite-free, safe, and durable Zn batteries10.1002/aenm.202103708 ↗
47. Additive manufacturing of LiNi1/3Mn1/3Co1/3O2 battery electrode material via vat photopolymerization precursor approach10.1038/s41598-022-22444-1 ↗
48. A conformal heat-drying direct ink writing 3D printing for high-performance lithium-ion batteries
49. Thermodynamic analysis and interpretative guide to entropic potential measurements of lithium-ion battery electrodes10.1021/acs.jpcc.1c10414 ↗
50. Determination of the kinetic parameters of mixed-conducting electrodes and application to the system Li3Sb10.1149/1.2133112 ↗
51. Modeling of lithium-ion batteries10.1016/S0378-7753(03)00282-9 ↗
52. Thermal modeling of porous insertion electrodes10.1149/1.1531194 ↗
53. Analysis of the heat generation of lithium-ion battery during charging and discharging considering different influencing factors10.1007/s10973-013-3599-9 ↗
54. Probing the thermal effects of voltage hysteresis in anionic redox-based lithium-rich cathodes using isothermal calorimetry10.1038/s41560-019-0410-6 ↗
55. Heats of mixing and of entropy in porous insertion electrodes10.1016/S0378-7753(03)00283-0 ↗
56. Power and thermal characterization of a lithium-ion battery pack for hybrid-electric vehicles10.1016/j.jpowsour.2006.01.038 ↗
57. Hysteresis in electrochemical systems
58. Testing of electrochemical capacitors: Capacitance, resistance, energy density, and power capability10.1016/j.electacta.2010.04.074 ↗
59. Best practice methods for determining an electrode material’s performance for ultracapacitors10.1039/c0ee00074d ↗
60. A measurement method for determination of dc internal resistance of batteries and supercapacitors10.1016/j.elecom.2009.12.004 ↗
61. Physical interpretations of Nyquist plots for EDLC electrodes and devices10.1021/acs.jpcc.7b10582 ↗
62. Effects of constituent materials on heat generation in individual EDLC electrodes10.1149/2.0771807jes ↗
63. Cycling-induced changes in the entropy profiles of lithium cobalt oxide electrodes10.1149/2.0071503jes ↗
64. Temperature effect and thermal impact in lithium-ion batteries: A review10.1016/j.pnsc.2018.11.002 ↗
65. “Zero” porosity high loading NMC622 positive electrodes for Li-ion batteries10.1149/1945-7111/ad1a20 ↗