Substructure development in hot plane strain compressed Al-1%Mn crystals

Abstract Hot PSC (channel-die) tests have been carried out to large strains (1.5) on 3 orientations of Al-1%Mn crystals, Bs{110} , S{123} and U{110} 1 0> , using a wide range of temperatures and strain rates (or Zener-Hollomon parameter Z ). The deformation substructures are characterised by EBSD orientation mapping in terms of sub-grain sizes δ and sub-grain misorientations and their frequency distributions over large areas. The sub-grain sizes respect the linear relation between 1/ δ and ln Z but with significant orientation dependency. The largest sub-grains are found in the Bs orientation at all Z and the smallest in the S orientation at high strain rates. Sub-grain misorientations increase rapidly with strain to 3 or 4° then approximately stabilise after 0.5 or 1. Some high angle boundaries (> 10°) are formed with frequencies about 10 −2 to 10 −3 . Many of the size effects can be attributed to an enhanced rate of sub-boundary generation in the case of the unstable grain orientations.